Re: [c-nsp] ACE30 Config

On 16/08/16 13:33, Gert Doering wrote: Hi, On Tue, Aug 16, 2016 at 02:07:12PM +0200, Chris Knipe wrote: Quick question... I'm about to install my first ACE30 into a 6500 (SUP720)... "don't" We've just pulled ours *out*. I can't imagine why anyone would be deploying them now... Maybe ther

Re: [c-nsp] ACE30 Config

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/services-modules/eol_C51-728979.html Extract from that same page: Customers are encouraged to migrate to the Citrix NetScaler 1000V (offered by Cisco) or alternative vendor offerings. Information about this product can be found at

Re: [c-nsp] ACE30 Config

Hi, > Op 16 aug. 2016, om 14:33 heeft Gert Doering het > volgende geschreven: > > Hi, > > On Tue, Aug 16, 2016 at 02:07:12PM +0200, Chris Knipe wrote: >> Quick question... I'm about to install my first ACE30 into a 6500 >> (SUP720)... > > "don't" > > It's a dead product, and Cisco has a long

Re: [c-nsp] ACE30 Config

In bridge mode the ACE does not participate in spanning-tree, it forwards BPDUs merging the two vlans.(101 & 102) So a spanning-tree recalc will occur for vlan the merged vlan, ~50 seconds. So the cmds are safe but there will be a brief outage, is that what you meant? Setting the default route on

Re: [c-nsp] ACE30 Config

Hi, On Tue, Aug 16, 2016 at 02:07:12PM +0200, Chris Knipe wrote: > Quick question... I'm about to install my first ACE30 into a 6500 > (SUP720)... "don't" It's a dead product, and Cisco has a long track record of breaking special-purpose modules (ACE, FWSM, WISM) in the 6500 on software upgrad

Re: [c-nsp] ACE30 Config

Thanks Mike. There's no existing svclc's on the 6500, so vlan-group 10 is unused. I was mainly concerned that the 6500 would stop switching VLAN101 after it's been assigned to the svclc. Just wanted to get confirmation on that before I drop all my traffic accidentally :-) On Tue, Aug 16, 2016 a

Re: [c-nsp] ACE30 Config

Config looks good for the 6500 portion of the config as long as the vlans you have specified for vlan-group 10 are unused? I also assume you have created the vlans as well? Mike On Tue, Aug 16, 2016 at 8:07 AM, Chris Knipe wrote: > Hi Guys, > > Quick question... I'm about to install my first AC

[c-nsp] ACE30 Config

Hi Guys, Quick question... I'm about to install my first ACE30 into a 6500 (SUP720)... Just a quick question about the svclc if I may... I already have VLAN101 with all my rservers (currently in production, being fed from a old LB we'll be replacing with the ACE30). I created a new VLAN102 whic