Hi,
Is it recommended to run three STM-1 (PA-POS-1OC3) on a single
Cisco700vxr with NPE-G1 ?
Regards,
Samit
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pi
Samit wrote:
Hi,
Is it recommended to run three STM-1 (PA-POS-1OC3) on a single
Cisco700vxr with NPE-G1 ?
Technically, it is supported, as each of the two buses have 600
bandwidth points, with an STM-1 interface taking up 300. Question is
whether it might be recommendable to get a second r
On Wednesday 16 July 2008 18:10:00 Garry wrote:
> Technically, it is supported, as each of the two buses
> have 600 bandwidth points, with an STM-1 interface taking
> up 300. Question is whether it might be recommendable to
> get a second router for redundancy reasons, e.g. if you
> are terminatin
On Wed, 16 Jul 2008, Samit wrote:
Is it recommended to run three STM-1 (PA-POS-1OC3) on a single Cisco700vxr
with NPE-G1 ?
Could it be done? Yes, but I wouldn't expect to see good performance if
you try to move anything approaching line-rate traffic on those interfaces.
jms
__
Behalf Of Samit
Sent: Wednesday, July 16, 2008 11:45 AM
To: cisco-nsp@puck.nether.net
Subject: [c-nsp] Three STM-1 on one Cisco 7200vxr-npeG1
Hi,
Is it recommended to run three STM-1 (PA-POS-1OC3) on a single
Cisco700vxr with NPE-G1 ?
Regards,
Samit
Nope
You will have no buffer should flooding traffic occurs.
a. r.isnaini rangkayo sutan
Justin M. Streiner wrote:
On Wed, 16 Jul 2008, Samit wrote:
Is it recommended to run three STM-1 (PA-POS-1OC3) on a single
Cisco700vxr with NPE-G1 ?
___
Thank you all for your feedback.
Regards,
Samit
Samit wrote:
Hi,
Is it recommended to run three STM-1 (PA-POS-1OC3) on a single
Cisco700vxr with NPE-G1 ?
Regards,
Samit
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.ne