Hi guys
I copied a file to slavedisk0: on a 6513-sup II board. when I try to use
verify slaveslot0:filename I get this error output
%Error verifying slaveslot0:c6sup22-jk2sv-mz.121-22.E2.bin (Bad file number)
the disk was formatted in this switch and the file copied without problems.
The
-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Alex Wa
Sent: Wednesday, February 25, 2009 11:46 AM
To: lista de correo de cisco
Subject: [c-nsp] flash disk problem
Hi guys
I copied a file to slavedisk0: on a 6513-sup II board. when I try to use
: RE: [c-nsp] flash disk problem
Thanks,charles
Firmware version is 6.1(3), see below output, but i don't undertand why
the Sw column is not showing the correct boostrap image that the switch
is loading. Now, if it has firmware below 7.1 how can i format and even
copy files to and fron
: [c-nsp] flash disk problem
To: awain...@yahoo.com, lista de correo de cisco cisco-nsp@puck.nether.net
Date: Wednesday, February 25, 2009, 11:39 AM
Maybe the trick is the software supports it, but you can’t actually boot off it
until it’s 7.1(1). Is this really a 64MB ATA card
Hi,
On Wed, Feb 25, 2009 at 08:46:28AM -0800, Alex Wa wrote:
I also would like to know the difference between disk0: and slot0:, i don't
fully understand it, if any.
disk0: - ATA disk, modern
slot0: - linear flash card, no ATA stuff, you don't wanna know
Just use slavedisk0.
gert
--
USENET