n Behalf Of *Brian
> Meade
> *Sent:* July-22-16 2:21 PM
> *To:* Cannizzaro, Vince
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] Supervisory Disconnect on ATA 190
>
>
>
> Which input on the Logison NCP are you hooked up to? It sounds like maybe
>
are not even making it that far.
-mn
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Cannizzaro, Vince
Sent: July-22-16 11:37 AM
To: 'cisco-voip@puck.nether.net'
Subject: [cisco-voip] Supervisory Disconnect on ATA 190
Hi everyone,
I'm trying to connect
Which input on the Logison NCP are you hooked up to? It sounds like maybe
the microphone or AUX input rather than the telephone input as it shouldn't
play anything through the speakers until it detects ringing voltage and
then goes off-hook. It may be that this thing needs an FXO port instead.
Ha
Hi everyone,
I'm trying to connect an ATA 190 to a Logison Paging Module a vendor installed
to get paging functionality at a site. The vendor has stated the following:
"Upon dialing the specific extension assigned to paging, this line is "live"
(i.e. answers the line A.K.A. Auto Answer) to
