Hi there,
On Thu, 28 May 2020, David Beecher via clamav-users wrote:
... [sendmail milter] for ... keyword in a subject line ...
As Mr. Beecher wrote, you can do this without a milter, if you're
prepared to wrestle with Sendmail's configuration and syntax.
I was going to set up milter but i
lamav-users
Date: 5/28/20 23:07 (GMT+02:00) To: ClamAV
users ML Cc: PGNet Dev ,
David Beecher Subject: Re: [clamav-users] milter On
5/28/20 12:39 PM, David Beecher via clamav-users wrote:> I need something that
is very fast and lightweight and basically if it> sees the word "ex
On 2020-05-28 3:39 p.m., David Beecher via clamav-users wrote:
I am running Sendmail 8.12 or newer.
I have ordered the milter book from amazon and am waiting for it's arrival.
Thank you so much, in advance for your input.
David
Hi,
Out of curiosity, what is the name of the milter book ?
* David Beecher via clamav-users:
> I am trying to set up a filter for watching for a specific keyword in
> a subject line so I can tag it as spam and reject it.
Milter-regex would work nicely, but you need neither a milter not ClamAV
for this simple task. Sendmail can perform header checks[1], e
On 5/28/20 12:39 PM, David Beecher via clamav-users wrote:
> I need something that is very fast and lightweight and basically if it
> sees the word "excelsior" in the subject line, it rejects the message.
I'm not clear if/why clamav needs to be part of your solution.
If it doesn't this
https:/
Hello,
I appreciate any direction here. I am trying to set up a filter for
watching for a specific keyword in a subject line so I can tag it as
spam and reject it.
I was going to set up milter but it appears most of the information on
milter and all of it's archives were deleted some time ago.
On Friday, May 31, 2019 8:50:13 AM EDT Maurizio Caloro wrote:
> Hello
>
> I try to setup clamav-milter to running with Postfix, i don't understund
> now not why Clam/Postfix cant Write/Access to this file.
>
> i try meny things now also root:root, Postfix:Postfix, Calmav and so
>
> clamav-milter
Hello
I try to setup clamav-milter to running with Postfix, i don't understund
now not why Clam/Postfix cant Write/Access to this file.
i try meny things now also root:root, Postfix:Postfix, Calmav and so
clamav-milter 0.100.3
postfix/smtpd[16013]: warning: connect to Milter service
unix:/var/
On Tue, 2013-05-14 at 16:02 +0200, Erwan David wrote:
> On Tue, May 14, 2013 at 03:39:07PM CEST, Matus UHLAR - fantomas
> said:
> > On 14.05.13 13:37, Erwan David wrote:
> >
> > >SInce yesteraday I get emails stuck on hold with followng postfix log:
> > >
> > >milter-hold: END-OF-MESSAGE from un
On Tue, May 14, 2013 at 03:39:07PM CEST, Matus UHLAR - fantomas
said:
> On 14.05.13 13:37, Erwan David wrote:
>
> >SInce yesteraday I get emails stuck on hold with followng postfix log:
> >
> >milter-hold: END-OF-MESSAGE from unknown[80.150.130.2]: milter triggers HOLD
> >action;
>
> This is t
On 14.05.13 13:37, Erwan David wrote:
SInce yesteraday I get emails stuck on hold with followng postfix log:
milter-hold: END-OF-MESSAGE from unknown[80.150.130.2]: milter triggers HOLD
action;
This is the reason:
OnInfected Quarantine
I do not want anything put on holmd. I do not want c
SInce yesteraday I get emails stuck on hold with followng postfix log:
milter-hold: END-OF-MESSAGE from unknown[80.150.130.2]: milter triggers HOLD
action;
My only milter is clamav-milter and I run the combination for several years
without problems.
At the time the message was put on h
Hi
clamav 0.90 on FC3
maillog shows 1 instance of this. should i worry or will it self correct?
Feb 22 11:31:30 proteus2 sendmail[507]: l1MBJUsR000507: milter_data(clamav):
EOM ACK/NAK timeout
Feb 22 11:32:03 proteus2 sendmail[507]: l1MBJUsR000507: Milter (clamav): to
error state
Mark
__
Hi all,
since 2 years we were satisfied having clamav on our small community
server (Slackware-11.0, sendmail), but the last upgrade to 0.90 brought a
complete disaster:
After a new install (the old version was completely removed along with the
config files) clamav-milter began to duplicate itsel
Just tried 0.90rc3 as a milter with sendmail 8.14.0.
No go ):
Steve
Redirected virus to [EMAIL PROTECTED] Warning: URL
http://sdtger.yahujo.hk/?61039975 failed to download: server returned nothing
(no headers, no data)
LibClamAV Warning: URL http://www.wwateqrsblues.com failed to download:
co
Thanks - that did it!
Wolfgang
> -Ursprüngliche Nachricht-
> Von: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Im Auftrag von
> Nigel Horne
> Bereitgestellt: Donnerstag, 02. November 2006 12:10
> Bereitgestellt in: Clamav
> Unterhaltung: [Clamav-users] Milter pro
On Thu, 2006-11-02 at 12:07 +0100, Clamav wrote:
> Hello!
> I try to run sendmail with clamav-milter with the recommended user
> clamav. If I run everything as use root - there is no problem. If I
> change to user clamav I get first in the logfile:
> -LibClamAV Error: Can't open/create /var/run/clm
Hello!
I try to run sendmail with clamav-milter with the recommended user
clamav. If I run everything as use root - there is no problem. If I
change to user clamav I get first in the logfile:
-LibClamAV Error: Can't open/create /var/run/clmilter.sock
/tmp/clamav-ff091e4518d14f2e5663f334e2208283: In
Steve Holdoway wrote:
Last night, clamav fell over. This is just about the first time it's happened.
The problem is, it took out the mail server completely.
I'm integrating into sendmail using the following line in sendmail.mc
INPUT_MAIL_FILTER(`clamav',`S=unix:/var/run/clamav/clmilter.sock, F
Last night, clamav fell over. This is just about the first time it's happened.
The problem is, it took out the mail server completely.
I'm integrating into sendmail using the following line in sendmail.mc
INPUT_MAIL_FILTER(`clamav',`S=unix:/var/run/clamav/clmilter.sock, F=T,
T=S:4m;R:4m')dnl
a
[EMAIL PROTECTED] wrote:
Hello,
I was getting some of these error messages yesterday:
Dec 8 16:17:39 mail sm-mta[9047]: jB90HTnE009047: Milter (clamav): local
socket name /var/run/clamav/clamav-milter.ctl unsafe
Dec 8 16:17:39 mail sm-mta[9047]: jB90HTnE009047: Milter (clamav): to error
sta
Hello,
I was getting some of these error messages yesterday:
Dec 8 16:17:39 mail sm-mta[9047]: jB90HTnE009047: Milter (clamav): local
socket name /var/run/clamav/clamav-milter.ctl unsafe
Dec 8 16:17:39 mail sm-mta[9047]: jB90HTnE009047: Milter (clamav): to error
state
Dec 8 16:17:39 mail s
On Thu, Jun 30, 2005 at 04:32:49PM +0200, Richard Pijnenburg said:
> Hi Brett,
>
> It seems your server has reached the limit of open files:
> LibClamAV Error: Can't create temporary file
> /export/home/var/tmp/clamav-ae56442370c55c7c/textportion8sL6E1: Too many
> open files <--
>
> It could be
Hi Brett,
It seems your server has reached the limit of open files:
LibClamAV Error: Can't create temporary file
/export/home/var/tmp/clamav-ae56442370c55c7c/textportion8sL6E1: Too many open files <--
It could be that it isn't closing the files Or there are to many programs
running.
Perheaps
Hi all.
I was running 0.86rc1 on a Solaris 9 box, when on Monday night, suddenly, it
stopped running. I looked in the log file, and found many instances of this:
LibClamAV Warning: j5S0vCAs024426:
/export/home/var/tmp/clamav-a125906f23a14050/msg.PsL6E1: No viruses detected
ERROR
LibClamAV War
Ed Stover wrote:
Damian Menscher wrote:
Actually fresh clam is running, I snipped it from the post because I
didnt think that it was relivant. Fresh clam is running as a daemon and
updating several times daily, and I have ran it by hand to ensure the
sigs are up todate.
I had the same problem s
Damian Menscher wrote:
> On Thu, 23 Jun 2005, Ed Stover wrote:
>
>> I just upgraded a way old, working clam installation but now it doesnt
>> work ;(
>> Clam is marking dirty files as clean and forwarding them to accounts.
>> any ideas for what to look at would be greatly appreciated.
>
>
> Just
On Thu, 23 Jun 2005, Ed Stover wrote:
I just upgraded a way old, working clam installation but now it doesnt
work ;(
Clam is marking dirty files as clean and forwarding them to accounts.
any ideas for what to look at would be greatly appreciated.
Just a thought, but maybe freshclam isn't runni
I just upgraded a way old, working clam installation but now it doesnt
work ;(
Clam is marking dirty files as clean and forwarding them to accounts.
any ideas for what to look at would be greatly appreciated.
x-virus-scanned: "ClamAV version 0.85.1, clamav-milter version 0.85 on --"
x-virus-statu
On Thursday 05 May 2005 16:06, Eugene Kurmanin wrote:
> I think, it's not a clamd or clamav-milter error.
> Probably it's a Sendmail 8.12.X and higher Milter API interface
> "features/bugs". I don't see this error with 8.11.7
I have not this error. I use
INPUT_MAIL_FILTER(`milter-clamav', `S=in
Hello, all.
I think, it's not a clamd or clamav-milter error.
Probably it's a Sendmail 8.12.X and higher Milter API interface
"features/bugs". I don't see this error with 8.11.7
I saw this problem with another milters and not only clamav-milter.
BTW, try search in google "timeout before data read
I use Spamassassin+procmail+clamav-milter. This way procmail calls spamd to
filter out spam and clamav-milter filters mail for virii via clamd. :)
--
<>
___
http://lurker.clamav.net/list/clamav-users.html
On 2005-04-25 13:22:07 +0200, Erwan David wrote:
> Le Mon 25/04/2005, Jon disait
> > Do you consider it better than using procmail and spamassassin?
>
> I do not know. I use postfix and clamsmtp. The problem with procmail
> is that it works at delivery level and may have lost some envelope
> infor
ok, thanks.
Erwan David wrote:
Le Mon 25/04/2005, Jon disait
Hi, ok.
Do you consider it better than using procmail and spamassassin?
I do not know. I use postfix and clamsmtp. The problem with procmail
is that it works at delivery level and may have lost some envelope
information.
Spamassas
Le Mon 25/04/2005, Jon disait
> Hi, ok.
>
> Do you consider it better than using procmail and spamassassin?
I do not know. I use postfix and clamsmtp. The problem with procmail
is that it works at delivery level and may have lost some envelope
information.
Spamassassin is anti-spam and can be us
Hi, ok.
Do you consider it better than using procmail and spamassassin?
/jon
Erwan David said the following on 2005-04-25 11:44:
Le Mon 25/04/2005, Jon disait
I see many are using clamav-milter. Whar is the diffrence in this approach?
milter is the sendmail filtering interface. clamav-milte
Le Mon 25/04/2005, Jon disait
> I see many are using clamav-milter. Whar is the diffrence in this approach?
milter is the sendmail filtering interface. clamav-milter is the way
to use clamav using this interface.
--
Erwan David
==
Trusted L
I see many are using clamav-milter. Whar is the diffrence in this approach?
/jon
___
http://lurker.clamav.net/list/clamav-users.html
it matches...
- Original Message -
From: "Subhendu Ghosh" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, April 21, 2005 8:20 AM
Subject: Re: [Clamav-users] milter in error state
>
> does the path to the socket match between sendmail and
okay thanks. il try it
- Original Message -
From: "Subhendu Ghosh" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, April 21, 2005 8:31 AM
Subject: Re: [Clamav-users] milter in error state
>
> clamd and clamav-milter both need to run as the sam
h" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, April 21, 2005 8:20 AM
Subject: Re: [Clamav-users] milter in error state
does the path to the socket match between sendmail and clamav-milter ?
permissions on socket?
On Thu, 21 Apr 2005, Pete Sherwin S. Villanueva wrote:
i didn't run clamd as clamav user. do i need to change the permission of the
socket and run as clamav user?
- Original Message -
From: "Subhendu Ghosh" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, April 21, 2005 8:20 AM
Subject: Re: [Clam
- Original Message -
From: "Subhendu Ghosh" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, April 21, 2005 7:38 AM
Subject: Re: [Clamav-users] milter in error state
On Thu, 21 Apr 2005, Pete Sherwin S. Villanueva wrote:
i did add this line to my sendmail.mc
On Thu, Apr 21, 2005 at 07:26:45AM +0800, Pete Sherwin S. Villanueva said:
> i did add this line to my sendmail.mc and recompile it.
>
> INPUT_MAIL_FILTER(`clmilter',`S=local:/var/run/clmilter.sock, F=,
> T=S:4m;R:4m')dnl
> define(`confINPUT_MAIL_FILTERS', `clmilter')
That's fine - the difference
The INPUT_MAIL_FILTER is in one line.i comment out this line
define(`confINPUT_MAIL_FILTERS', `clmilter')
but still error occured.
- Original Message -
From: "Subhendu Ghosh" <[EMAIL PROTECTED]>
To: "ClamAV users ML"
Sent: Thursday, April 21, 200
On Thu, 21 Apr 2005, Pete Sherwin S. Villanueva wrote:
i did add this line to my sendmail.mc and recompile it.
INPUT_MAIL_FILTER(`clmilter',`S=local:/var/run/clmilter.sock, F=,
T=S:4m;R:4m')dnl
define(`confINPUT_MAIL_FILTERS', `clmilter')
The INPUT_MAIL_FILTER should be one line (assuming email wra
TED]>
To: "ClamAV users ML"
Sent: Thursday, April 21, 2005 7:15 AM
Subject: Re: [Clamav-users] milter in error state
> On Wed, 20 Apr 2005, Pete Sherwin S. Villanueva wrote:
>
> > I installed clamav on redhat 9 and also the clamav milter so that it
will scan all mail comin
On Wed, 20 Apr 2005, Pete Sherwin S. Villanueva wrote:
I installed clamav on redhat 9 and also the clamav milter so that it will scan
all mail coming in and out, and i also run the
clamscan, it will detect virus.
now my problem is milter is not communicating with sendmail (its not scanning
mails)
I installed clamav on redhat 9 and also the clamav milter so that it will scan
all mail coming in and out, and i also run the
clamscan, it will detect virus.
now my problem is milter is not communicating with sendmail (its not scanning
mails).
in the sendmail log file this message will came
On Wed, 09 Feb 2005 08:28:12 -0600, Steven Stern
<[EMAIL PROTECTED]> wrote:
>
>It was the only error I could find. Where can I find .82c? Is that the
>snapshot or do I extract it from CVS?
I rolled back my production machines to 0.81 and have built latest-devel on my
test machine. I'll let you
> It was the only error I could find. Where can I find .82c? Is that the
> snapshot or do I extract it from CVS?
Either
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
On Wed, 9 Feb 2005 09:02:15 +, Nigel Horne <[EMAIL PROTECTED]> wrote:
>
>I am confused. Your subject says "Milter died", yet the only message you send
>is
>a non fatal warning. Try 0.82c and post the results.
It was the only error I could find. Where can I find .82c? Is that the
snapshot or
Steven Stern wrote:
Clamav-milter (0.82) died this afternoon. As far as I can see, this is the
first error that appears in clamd.log. After that, there are many similar
ones.
LibClamAV Warning: j17LZE5n030858: /var/spool/clamav/msg.sUSLWW: Access
denied.
ERROR
Are you using /var/spool/clamav/
On Wednesday 09 Feb 2005 04:29, Steven Stern wrote:
> Clamav-milter (0.82) died this afternoon. As far as I can see, this is the
> first error that appears in clamd.log. After that, there are many similar
> ones.
>
> LibClamAV Warning: j17LZE5n030858: /var/spool/clamav/msg.sUSLWW: Access
> denied
Clamav-milter (0.82) died this afternoon. As far as I can see, this is the
first error that appears in clamd.log. After that, there are many similar
ones.
LibClamAV Warning: j17LZE5n030858: /var/spool/clamav/msg.sUSLWW: Access
denied.
ERROR
I stopped sendmail and clamd, did an rm -fr the conten
Cesar Gonzalez writes:
>
> I'm getting this on my maillog, any ideas? It runs for a while, and for no
> aparent reason starts doing that, stoping clamd and milter and restarting
> them fixes the problem, but it's rather annoying doing several times a day.
it may be a complete coincidence, but
On Fri, 28 Jan 2005 16:22:45 - in
[EMAIL PROTECTED] "Nigel Horne"
<[EMAIL PROTECTED]> wrote:
> Wrong. When I reached 'z' I went to 'aa'
OK, as I said I don't use it here so I had not followed it that closely.
--
Brian Morrison
bdm at fenrir dot org dot uk
GnuPG key ID DE32E5C5 - http://
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Brian
> Morrison
> I'm pretty sure that there is a later clamav-milter than that ( I don't
> use it myself, but I assume that 0.80j is later than 0.80ff
Wrong. When I reached 'z' I went to 'aa'
> Brian Morrison
On Fri, 28 Jan 2005 10:11:50 -0600 in
[EMAIL PROTECTED] "Cesar Gonzalez"
<[EMAIL PROTECTED]> wrote:
> clamav-milter version 0.80ff
> ClamAV version devel-20050126
I'm pretty sure that there is a later clamav-milter than that ( I don't
use it myself, but I assume that 0.80j is later than 0.80ff)
Try version 0.81. If it's still not working report back to here, this time
with your sendmail.mc, clamd.conf and clamav-milter start options.
On Friday 28 Jan 2005 16:11, Cesar Gonzalez wrote:
>
> I'm getting this on my maillog, any ideas? It runs for a while, and for no
> aparent reason starts d
I'm getting this on my maillog, any ideas? It runs for a while, and for no
aparent reason starts doing that, stoping clamd and milter and restarting
them fixes the problem, but it's rather annoying doing several times a day.
OS FreeBSD 4.11-Stable
clamav-milter version 0.80ff
ClamAV version devel
On Friday 07 Jan 2005 15:15, Raj Mathur wrote:
>> clamav-milter 0.80-7
>
> Nigel> Is the problem present in the version in CVS?
>
> Haven't tried that, since I'm paranoid about non-packaged software on
> production boxes. However if you feel that will help solve/trace the
> problem I can
On Friday 07 Jan 2005 15:15, Raj Mathur wrote:
>> clamav-milter 0.80-7
>
> Nigel> Is the problem present in the version in CVS?
>
> Haven't tried that, since I'm paranoid about non-packaged software on
> production boxes. However if you feel that will help solve/trace the
> problem I can
> "Nigel" == Nigel Horne <[EMAIL PROTECTED]> writes:
Nigel> On Friday 07 Jan 2005 13:45, Raj Mathur wrote:
>> Hi,
>>
>> Running the following on a Debian Sarge machine:
>>
>> clamav-milter 0.80-7
Nigel> Is the problem present in the version in CVS?
Haven't tried
On Friday 07 Jan 2005 13:45, Raj Mathur wrote:
> Hi,
>
> Running the following on a Debian Sarge machine:
>
> clamav-milter 0.80-7
Is the problem present in the version in CVS?
-Nigel
--
Nigel Horne. Arranger, Composer, Typesetter.
NJH Music, Barnsley, UK. ICQ#20252325
[EMAIL PROTECTED] htt
Hi,
Running the following on a Debian Sarge machine:
clamav-milter 0.80-7
clamav-daemon 0.80-7
kernel-image 2.6.8-10
libc6 2.3.2.ds1-18
Averaging about 200 incoming SMTP connections per minute. Also
running SpamAssassin and spamass-milter. No local delivery (except to
the spam con
Is the daily snapshot (www.clamav.net) any better?
-Nigel
On Wednesday 17 Nov 2004 13:05, Doug Eubanks wrote:
> clamav-0.80-1.1.el3.dag
> clamav-milter-0.80-1.1.el3.dag
> WhiteBox Enterprise Linux 3.0, based on RedHat Enterprise 3.0
>
> Thanks,
> Doug
>
> > What version of clamav?
> > What vers
Doug Eubanks wrote:
Nov 17 08:52:45 Joe sendmail[6972]: iAHBqLF5006972: Milter (clmilter): write(A)
returned -1,
expected 5: Broken pipe Nov 17 08:52:45 Joe sendmail[6972]: iAHBqLF5006972:
Milter (clmilter):
to error state
Sometimes, the write(A) says write(L)
Sendmail tried to send a
clamav-0.80-1.1.el3.dag
clamav-milter-0.80-1.1.el3.dag
WhiteBox Enterprise Linux 3.0, based on RedHat Enterprise 3.0
Thanks,
Doug
> What version of clamav?
> What version of clamav-milter?
> What operating system?
>
>
> On Wednesday 17 Nov 2004 13:01, Doug Eubanks wrote:
>
>> Can someone expla
What version of clamav?
What version of clamav-milter?
What operating system?
On Wednesday 17 Nov 2004 13:01, Doug Eubanks wrote:
> Can someone explain to me what this error message means? It comes in groups
> of 1 to 50, every 3 to 30 mins. No action is required, I just do not know
> what is
Can someone explain to me what this error message means? It comes in groups of
1 to 50, every 3 to 30 mins. No action is required, I just do not know what is
going on and if there is an actual problem or not.
Nov 17 08:52:45 Joe sendmail[6972]: iAHBqLF5006972: Milter (clmilter): write(A)
retu
On Tuesday 19 Oct 2004 08:32, christian laubscher wrote:
>
> when i enter 'clamd -V' i get a version line reflecting the i get a
> version line indicating the current database version, eg .../535/...,
> currently.
>
> the clamav-milter X-Virus-Scanned lines, however, seem to reflect the
> vers
when i enter 'clamd -V' i get a version line reflecting the i get a
version line indicating the current database version, eg .../535/...,
currently.
the clamav-milter X-Virus-Scanned lines, however, seem to reflect the
version feedback of clamd when the milter was started, not the current
one
--- Joe Maimon <[EMAIL PROTECTED]> wrote:
>
>
>
> >INPUT_MAIL_FILTER(`clamav-milter',
> >`S=local:/clamav/clmilter.sock,F=, T=S:4m;R:4m')dnl
> >define(`confINPUT_MAIL_FILTERS',
> `clamav-milter')dnl
> >
> >
> >
> >
> You need to pass the proper socket path to the
> milter as its startup
>
--- Joe Maimon <[EMAIL PROTECTED]> wrote:
>
>
>
> >INPUT_MAIL_FILTER(`clamav-milter',
> >`S=local:/clamav/clmilter.sock,F=, T=S:4m;R:4m')dnl
> >define(`confINPUT_MAIL_FILTERS',
> `clamav-milter')dnl
> >
> >
> >
> >
> You need to pass the proper socket path to the
> milter as its startup
>
INPUT_MAIL_FILTER(`clamav-milter',
`S=local:/clamav/clmilter.sock,F=, T=S:4m;R:4m')dnl
define(`confINPUT_MAIL_FILTERS', `clamav-milter')dnl
You need to pass the proper socket path to the milter as its startup
arguments
LocalSocket /clamav/clmilter.sock
Sendmail need one socket to talk
--- Nigel Horne <[EMAIL PROTECTED]> wrote:
> Version of operating system?
Mandrake 10
> output of clamav-milter --version?
ClamAV version 0.75.1, clamav-milter version 0.75c
> what runtime arguments are you giving to
-lo
> clamav-milter?
what about it?
> What did you put into sendmail.mc?
INPUT
Scott Grayban wrote:
Hi,
I installed clamav but I am getting errors with it.
Milter: data, reject=451 4.7.1 Please try again later
Any ideas?
TIA
Version of operating system?
output of clamav-milter --version?
what runtime arguments are you giving to clamav-milter?
What did you put into sendmail
Scott Grayban wrote:
I did see this in the syslog also...
Aug 21 16:26:16 webcp clamav-milter[14068]:
clamfi_header: Received: (from [EMAIL PROTECTED]) ^Iby
removed (8.12.11/8.12.11/Submit) id i7LM4E5M032621;
^ISat, 21 Aug 2004 15:04:14 -0700
Aug 21 16:26:16 webcp clamav-milter[14068]:
clamfi_heade
I did see this in the syslog also...
Aug 21 16:26:16 webcp clamav-milter[14068]:
clamfi_header: Received: (from [EMAIL PROTECTED]) ^Iby
removed (8.12.11/8.12.11/Submit) id i7LM4E5M032621;
^ISat, 21 Aug 2004 15:04:14 -0700
Aug 21 16:26:16 webcp clamav-milter[14068]:
clamfi_header: Date: Sat, 21 Aug
Hi,
I installed clamav but I am getting errors with it.
Milter: data, reject=451 4.7.1 Please try again later
Any ideas?
TIA
---
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media
100pk Sonic DVD-R 4x for only $29 -100pk
> would like to check if there is any variables for clamav-milter
> that can be
> included into the template file (-t option).
Only %v at the moment.
-Nigel
---
This SF.Net email is sponsored by: GNOME Foundation
Hackers Unite! GUADEC: The
heya,
would like to check if there is any variables for clamav-milter that can be
included into the template file (-t option). If i run the command -H
(include header) and -t option together ... the -H option is overridden...
i would like to use template and include the mail header when sending th
On Thursday 20 May 2004 10:52 am, Korchmenuk Nickolay wrote:
> Hi
>
> man clamav-milter gives --from=EMAIL option, but when I try to start milter
> it says "unknown option". What's wrong?
Yes, I do know about this. The fix is trivial and I hope to upload to CVS ASAP.
-Nigel
--
Nigel Horne. Arra
Hi
man clamav-milter gives --from=EMAIL option, but when I try to start milter it says
"unknown option". What's wrong?
--
Korchmenuk Nickolay
20 May 2004 12:51:08
---
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest
On Friday 07 May 2004 11:29 pm, Ing. Germán González B. wrote:
> I upgrade from clamav-devel-20040418 to clamav-devel-20040507 and
> notifies from clam to postmaster to inform a virus was found, are queued.
> After one hour the messages are sent to posmaster (Every hour the queue
> is procesed)
On Sat, 8 May 2004, Antony Stone wrote:
> On Saturday 08 May 2004 12:09 am, Todd Lyons wrote:
>
> > Ing. Germán González B. wanted us to know:
> >
> > > After one hour the messages are sent to posmaster (Every hour the queue
> > > is procesed)
> > >
> > > CLAMAV_FLAGS="--quarantine-dir=/var/clam
> Ing. Germán González B. wanted us to know:
>
> >CLAMAV_FLAGS="--quarantine-dir=/var/clamav/quarantine --max-children=200
>
> Holy cow! 200 ??? Is there a reason that you have it set that high?
>
Well. Two months ago the server reach 150 childrens. I have to apply en
filter to port 25 from a
On Saturday 08 May 2004 12:09 am, Todd Lyons wrote:
> Ing. Germán González B. wanted us to know:
>
> > After one hour the messages are sent to posmaster (Every hour the queue
> > is procesed)
> >
> > CLAMAV_FLAGS="--quarantine-dir=/var/clamav/quarantine --max-children=200
>
> Holy cow! 200 ???
Ing. Germán González B. wanted us to know:
>CLAMAV_FLAGS="--quarantine-dir=/var/clamav/quarantine --max-children=200
Holy cow! 200 ??? Is there a reason that you have it set that high?
--
Regards... Todd
They that can give up essential liberty to obtain a little temporary
safety
Hi
I upgrade from clamav-devel-20040418 to clamav-devel-20040507 and
notifies from clam to postmaster to inform a virus was found, are queued.
After one hour the messages are sent to posmaster (Every hour the queue
is procesed)
Virus are filtered OK.
Clamav-devel-20040418 works fine.
I have F
I attempted to upgrade my ClamAV from 0.68 to 0.70 this morning. 0.68 has
been running flawlessly on Fedora Core 1 patched to reasonably current (I
haven't put the latest kernel on, I'm still at 2.4.22-2174nptl).
The error I get is
Apr 21 10:57:27 sweep sendmail[1539]: i3LEvR8Z001539: SYSERR(r
On Sunday 18 Apr 2004 11:52 am, Leo Jaaskelainen wrote:
> My clamav-milter is currently started with the -b option and when a
> virus-infected message comes in, an error message with the subject "Virus
> intercepted!" is sent back to the sender and CC:d to postmaster and the
> intended recipient.
Hi everybody,
is it possible to configure clamav-milter so that it doesn't bounce infected
messages but the intended recipient still gets a warning that they were about to
reveive a virus message? I'm using clamd 0.70 and sendmail 8.12 with
clamav-milter 0.70j.
My clamav-milter is currently start
Nigel Horne wrote:
On Wednesday 31 Mar 2004 9:06 pm, Todd Lyons wrote:
Ran the following ./configure:
I haven't bothered committing the fix for this while I was waiting for the
makefile system to be fixed so that clamav-milter would build again.
This has now been done, thanks to Tomasz K.,
On Wednesday 31 Mar 2004 9:06 pm, Todd Lyons wrote:
> Ran the following ./configure:
I haven't bothered committing the fix for this while I was waiting for the
makefile system to be fixed so that clamav-milter would build again.
This has now been done, thanks to Tomasz K., and the new clamav-milte
Ran the following ./configure:
./configure --disable-urandom --disable-clamav --enable-milter
--with-user="clamav" --with-group="clamav" --with-dbdir=/var/clamav
When trying to build, the milter build fails because it's still looking
for cfgfile.h. Changed clamav-milter/clamav-milter.c to includ
> I have now an email with attachment which is rejected with this error
> (Milter: data, reject=451 4.7.1 Please try again later) - reproducable.
> Are the developers interested? Where to send it?
Are you using any other milters? When ever I see that message it is always
an indication that the oth
On Thu, 25 Mar 2004 11:10:21 +0100
"Clamav" <[EMAIL PROTECTED]> wrote:
> I have now an email with attachment which is rejected with this error
> (Milter: data, reject=451 4.7.1 Please try again later) -
> reproducable. Are the developers interested? Where to send it?
Please send it to [EMAIL PRO
On Thursday 25 Mar 2004 10:10 am, Clamav wrote:
> I have now an email with attachment which is rejected with this error
> (Milter: data, reject=451 4.7.1 Please try again later) - reproducable.
> Are the developers interested? Where to send it?
Please send me a copy of the email.
> Best regards
>
1 - 100 of 132 matches
Mail list logo
