Re: Stus-List DQOTD - Cruising spinnaker - Luff v. Leach?

Most of what Josh said is correct. However, all symmetrical spinnakers I have seen have the numbers on both sides of the spinnaker, so you don't have to be concerned about which side is port and which side is starboard.Before you buy any necessary gear for the spinnaker, learn about end for end gy

Re: Stus-List 1986 C&C 44 balsa core isolated or not

As an owner of a 1986 44 I am very interested in the results of the survey on your 44. I have had mine for 10 yrs and all is good. Feel free to ask me questions. Fred Hazzard S/V Fury C&C 44 Portland, Or On Jul 1, 2017 7:36 PM, "Dan via CnC-List" wrote: > I already did that on the hull and it

Re: Stus-List 1986 C&C 44 balsa core isolated or not

As I understand it C&C has had few failures that weren't caused by damage (collisions) or bad POs. The only wet sections of my boat are the rudder. Had it rebuilt. Welds looked immaculate. 4 years later it is wet again. Core of my rudder is made of medium density foam not balsa. Josh On Jul 1,

Re: Stus-List 1986 C&C 44 balsa core isolated or not

I already did that on the hull and it sounds good and crisp. The topsides are hard to read because many areas are only 8-12 inches wide and you don't get the same sounds from those spots. The wider flatter sections sounded ok though. Dan On Sat, Jul 1, 2017 at 11:20 PM, Josh Muckley via CnC-List

Re: Stus-List 1986 C&C 44 balsa core isolated or not

You could take a plastic mallet for yourself and percussion test in key locations. Josh On Jul 1, 2017 10:17 PM, "Dan via CnC-List" wrote: > Thanks Josh, that's what I suspected. The boat was well cared for and > installs were all done by pros (I was told) so I should be ok to push ahead > with

Re: Stus-List 1986 C&C 44 balsa core isolated or not

Thanks Josh, that's what I suspected. The boat was well cared for and installs were all done by pros (I was told) so I should be ok to push ahead with the survey and hopefully become an owner like you guys :) On Sat, Jul 1, 2017 at 11:06 PM, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote

Re: Stus-List 1986 C&C 44 balsa core isolated or not

C&C designed solid areas for through-hulls and transducers but any aftermarket stuff may not have been installed in those locations. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Jul 1, 2017 10:04 PM, "Dan via CnC-List" wrote: Sorry if this was sent twice - the first time I tried it I

Re: Stus-List DQOTD - Cruising spinnaker - Luff v. Leach?

It sounds like a symmetrical spinnaker. The luff and leach are the same length... In fact they are interchangeable depending on the tack of the boat. You'll need a spinnaker pole roughly equal to the "J" length (head stay to the mast). The pole is set parallel/in line with the boom, jaws facing

Stus-List 1986 C&C 44 balsa core isolated or not

Sorry if this was sent twice - the first time I tried it I was not registered but had no responses... I'm looking at a 1986 C&C 44 to buy. Before I get into paying for a survey to check the core out with a moisture meter I'm wondering if any 44 owners out there have had any problems with wet core?

Re: Stus-List DQOTD - Cruising spinnaker - Luff v. Leach?

If luff and leech are the same length, it's a symmetrical kite. Don't let that stop you flying it as if it was asymmetrical. Andy C&C 40 Peregrine Andrew Burton 61 W Narragansett Newport, RI USA02840 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Jul 1, 2017,

Stus-List DQOTD - Cruising spinnaker - Luff v. Leach?

OK, seems like a dumb question.  We spread out the cruising spinnaker on our lawn today, having not put it up before on our new (to us) C&C 37/40+/.  It is in a spinnaker sock.  The sheets were in the bag, but not attached to the sail.  It is made by UK.  Along one edge is a bright green strip. 

Re: Stus-List Drone Video

Very nice.  Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy POYC Pegasus Lf38 Significant Other LF39  Original message From: Josh Muckley via CnC-List Date: 7/1/17 16:55 (GMT-08:00) To: C&C List Cc: Josh Muckley Subject: Re: Stus-List Drone Video The pilot got around t

Re: Stus-List Drone Video

The pilot got around to sending me the full length video in ultra high resolution. I added music and trimmed the beginning and end. Pretty cool. https://youtu.be/uNgjeeNMBVA Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Jul 1, 2017 7:37 PM, "Gary Russell via CnC-List" wrote: > Wha

Re: Stus-List Drone Video

What a nice video! Gary S/V Kaylarah '90 C&C 27+ East Greenwich, RI, USA ~~~_/)~~ On Thu, Jun 29, 2017 at 1:27 PM, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > An amateur drone pilot spotted us while we were out sailing. He searched > our boat name and then tracked down

Re: Stus-List Northstar Explorer S310 Paddlewheel Axle

Check with Airmar, as they probably made that transducer for Northstar: www.airmar.com/productinfo.html?category=MT&name=Marine%20Transducers Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield,

Re: Stus-List engine shut-off t-handle repair or replacement

Nice. Where did you find that handle? Dave. Sent from my iPad > On Jun 30, 2017, at 2:37 PM, Marek Dziedzic wrote: > > Dave, > > Thanks for the suggestion. I did look at Lee Valley, but I did not find what > you did. I bought the handle and installed. The total cost $2.50 (CAD). > https:/

Re: Stus-List Northstar Explorer S310 Paddlewheel Axle

Or stainless welding rod? Sent from Samsung tablet. Original message From: henry evans via CnC-List Date: 7/1/2017 6:08 AM (GMT-05:00) To: Thomas Delaney via CnC-List Cc: henry evans Subject: Re: Stus-List Northstar Explorer S310 Paddlewheel Axle Tom, If wors

Re: Stus-List Northstar Explorer S310 Paddlewheel Axle

Tom, If worse comes to worse, try your local hobby shop.  They usually stock both brass and stainless rod in a variety  of small diameters for hobbyists. Cut it to the length you need for your axel..  Cheers, Hank On Friday, June 30, 2017, 9:31:48 PM CDT, Thomas Delaney via CnC-List wrote: Hi