Re: Stus-List Alternator wiring

2017-08-27 Thread Mark Miller via CnC-List
Hi, My question is relevant I think. I have just replaced both alternators on my Westterbeke 33, the second alternator was added by the PO. When I reconnected the wiring to the alternators I found there was no wires connected to the second one. Only the wires coming off the charging post.

Re: Stus-List Storm Harvey

2017-08-27 Thread bushmark4--- via CnC-List
Dennis, you're rightif this prediction is true, Harvey will end up directly over top of us in Louisville, KY by next Friday-Saturday...! Richard Richard N. Bush Law Offices 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -Original

Re: Stus-List wheel squeak

2017-08-27 Thread Dave Godwin via CnC-List
I’d like to chime in and endorse Bruce and Chuck. I removed the idler plate assembly when I pulled the rudder and dropped the keel some years back. I intend to replace ALL of the system except for the quadrant which seems to be okay. An inspection of the idler pulleys revealed some play and

Stus-List Edson cable

2017-08-27 Thread Len Mitchell via CnC-List
Bruce, For what its worth, I had my steering cable break in a squall. I was 50 miles civilization but maybe 5-10 miles from a sheltered cove. I could not have steered long with the emergency tiller and there was no way to get parts. The cable was loose and rode up on the quadrant wheel cutting

Re: Stus-List wheel squeak

2017-08-27 Thread Chuck Gilchrest via CnC-List
I'm sure one could buy the individual components to make up a chain/wire steering kit at an industrial supply place like Grainger. I'd still use Edson's data sheets to reference the proper length and diameter 7 by 19 stainless wire, the right size SS chain (#50 usually), the nicopress fittings

Re: Stus-List wheel squeak

2017-08-27 Thread David via CnC-List
This is one area ya don't wanna mess with. Go Edson. I am sure Chuck wI'll elaborate further... Sent from my Verizon 4G LTE smartphone Original message From: Bruce Whitmore via CnC-List Date: 8/27/17 9:21 AM (GMT-05:00) To: cnc-list@cnc-list.com

Re: Stus-List transmission

2017-08-27 Thread William Walker via CnC-List
Really, I trimmed last message...sorry Stu.. Bill Walker Cnc 36 Sent from AOL Mobile Mail___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to:

Re: Stus-List transmission

2017-08-27 Thread William Walker via CnC-List
Ok, really, its a friends boatwhen the transmission is in gear you can still rotate, with some difficulty, but not a lot, the prop shaft...on mine, when in gear it is locked. What is friends diagnosis / fix? Sent from AOL Mobile Mail On Saturday, August 26, 2017 Gary Russell via CnC-List

Re: Stus-List wheel squeak

2017-08-27 Thread Bruce Whitmore via CnC-List
This brings up a good point - As for the cables, where would folks here buy them?  Directly from Edson (expensive) or is there a less expensive, but still good quality alternative (say from McMaster Carr, Grainger, etc.)?  Bruce Whitmore (847) 404-5092 (mobile) bwhitm...@sbcglobal.net