Stus-List Re: C&C 37r coming to market soon

No, she's not even listed yet. On Jul 8, 2021 9:36 PM, Joel Delamirande via CnC-List wrote:Is the 37r sold already On Thu, Jul 8, 2021 at 9:33 PM David Risch via CnC-List wrote: You da man. Thank you but  keeping my Corsair for continued NE explorations. Was just

Stus-List Old Harken Roller II

HI Guys, I replaced my old harken roller furler with a new Sheafer. Before I toss it, I thought I'd see if anyone needed any parts. Maybe I should send it to one of the used boat parts places. At least maybe it could go to use rather than being trashed... I replaced the old harken traveler too

Stus-List Re: Old Harken Roller II

Hi Danny What model furler and do you have pictures? Some of those parts are no loger made and very difficult to get. Mike Hoyt Persistence Halifax, NS From: Danny Haughey via CnC-List Sent: July 9, 2021 12:18 PM To: cnc-list@cnc-list.com Cc: Danny Haughey Subject: Stus-List Old Harken Roll

Stus-List Re: Old Harken Roller II

Hi Danny, I have a 1987 unit 1 I dont' know where you are located, but i would be interested to have one or two spares foils connectors. Foil section would be nice too but i guess the shipping would be challenging. Thanks Bruno Lachance 33-2 New-Richmond, Qc

Stus-List Re: Old Harken Roller II

Hi Danny I could use an extrusion and connector myself. Mine is also missing the top bearing. Thanks for putting this out there. Dave 33-2 - Toronto area Sent from my iPhone > On Jul 9, 2021, at 11:19 AM, Danny Haughey via CnC-List > wrote: > >  > HI Guys, I replaced my old harken roller

Stus-List Re: Old Harken Roller II

Hi Danny,  I have a Harken II Unit 1 Same as Bruno Spare Connectors and a Foil..would be a great thing to have in the parts department. Cheers Johnny Wright1970 C&C36RSault Ste Marie, Ontario, Canada On Friday, July 9, 2021, 11:19:32 a.m. EDT, Danny Haughey via CnC-List wrote:

Stus-List Re: Old Harken Roller II

OK so, Steve Mallet was the first to respond and he's looking for the lower stuff. I'm in Rehoboth Massachusetts. I'm sure the foils can be shipped. Just need a longer box and its all about cost from there. The thing is still completely assembled at the boatyard, in a rack, currently in Barrin

Stus-List Re: Old Harken Roller II

Hi Danny I once sold a complete roller furling assembly off a previous boat. The one thing I learned the hard way is that Loc Tite is used when the foils are assembled. Don't forget to apply heat to the set screws before removal or it may not be so pretty. I used UPS for the shipping. Sent

Stus-List Re: Old Harken Roller II

FYI. Shipping has gone up appreciably lately. Sent from my Android. Please forgive typos. Thank you. From: Hoyt, Mike via CnC-List Sent: Friday, July 9, 2021 3:19:12 PM To: 'Stus-List' Cc: Hoyt, Mike Subject: Stus-List Re: Old Harken Roller II Hi Danny I o

Stus-List Re: Old Harken Roller II

I keep having problems with my Harken halyard twisting around the top of the sail. Anyone else experience this? Get Outlook for Android From: dukatolla--- via CnC-List Sent: Friday, July 9, 2021 8:51:45 AM To: Danny Haughey via CnC-List C

Stus-List Re: Old Harken Roller II

Yes. I puzzled over this for 2 seasons, and experimented with ineffective solutions until I f inally, seriously, cleaned and lubricated the head swivel while catching up on maintenance stuff. I did not connect this with the wrapping at all as It had always seemed to turn very freely however

Stus-List George Harding Cuthbertson's Binder #5 Slides

Binder #5 of the GHC Archives. https://www.sugarsync.com/pf/D023919_94423331_3175593 3 and 4 haven't been published yet. As usual if you would care to support my efforts towards publishing my Dad’s work, please consider helping the Marine Museum of the