Yes – it was liquid electrical tape.
Joe
From: Wade Glew via CnC-List
Sent: Sunday, August 22, 2021 1:46 PM
To: Stus-List
Cc: Wade Glew
Subject: Stus-List Re: Leaking hatch
trying to remember Joe but I thought you said it was liquid electrical tape you
used on that hatch seal
trying to remember Joe but I thought you said it was liquid electrical tape
you used on that hatch seal ?
Wade
Oh Boy, 33-2
On Sun, Aug 22, 2021 at 10:54 AM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> I got by with Capt. Tolley’s for many years, but recently my fo
I got it out of the boat without removing the heat exchanger. The flange
was bolted onto 3 studs that remained in the exhaust manifold when I
removed the nuts. I lost coolant when the flange was separated from the
manifold. That surprised me but it appears the system was built that way. I
unwrapped
I replaced the lens on my forward hatch probably about 6 years ago. I used
black Sikaflex 295uv and Sikaflex primer. Still no leaks. The primer is
critical because the first time I did it I did not use the primer and it
only lasted about 2 years before it leaked. I believe that I still have the
ori
I got by with Capt. Tolley’s for many years, but recently my forward hatch had
a leak that wouldn’t fix and a little strip of liquid rubber from West Marine
painted on the outside did the trick 😊
Joe Della Barba
Coquina C&C 35 MK I
Kent Island MD USA
From: James Hesketh via CnC
I’ve used 795 and it had a longer (and welcome) working time vs yer’ basic
silicone. It cures easily within 24 hrs to be rubbery but not gooey, lovely
stuff.
I did have some cheap and aging GE eavestrough sealant ‘with silicone’ that
would not cure properly. Thought I’d use it up but it did
Just to clarify- I am trying to figure out what the PO used, because it seems
to have worked well. Where the gooey sealant was added it is not leaking. It
is leaking where the extra sealant was not added. Dave
S/V Aries
1990 C&C 34+
New London, CT
> On Aug 22, 2021, at 11:10 AM, Joel Aron
795 has a short shelf life. Could be they used expired stuff
On Sun, Aug 22, 2021 at 10:55 AM James Hesketh via CnC-List <
cnc-list@cnc-list.com> wrote:
> Good luck with your boat!
>
> I recently resealed my forehatch (replaced the lens also) using Dow 795
> calk and believe it'll be a long-time
Good luck with your boat!
I recently resealed my forehatch (replaced the lens also) using Dow 795
calk and believe it'll be a long-time cure from what I've seen, read and
heard of it.
Jim Hesketh
Whisper C&C 26
Miami, FL
On Sun, Aug 22, 2021 at 10:35 AM David Knecht via CnC-List <
cnc-list@cnc-l
I noticed the other day that my starboard cabin top hatch was leaking. It
appeared to be coming in around the plexiglass itself. It looks like a PO had
done some repair in the past, because there was a gooey black sealant on the
inside of the lens clearly added on top of the seal on the outboa
Highly recommend Jim Burt at Great Lakes Marine Transport. In Port
Washington, WI.https://www.greatlakesmarineservices.com/ourteam.htm
Jim did a stellar job moving my boat from Georgia to Michigan's UP.
*Chuck Saur*
517 490-5926 Cell
Thanks to all of the subscribers that contributed to the
11 matches
Mail list logo
