I almost unsubscribef from the group until I read your quip
Keep up the good work
DDrake
73 JH
CC 26
On Oct 16, 2014, at 10:15 PM, Sam Salter via CnC-List cnc-list@cnc-list.com
wrote:
You guys can't figure out how to clean up Butyl - there's no way your going
to get your heads around
Paint thinner works well to remove those pesky spots
DDrake
73 JH
CC 26
On Oct 15, 2014, at 4:21 PM, Bill Coleman via CnC-List
cnc-list@cnc-list.com wrote:
I think that may work right after installation, but at least in my case it
was a year or so B4 the mess occurred (Hot Summers)
The importance. Of using premium fuel is that have little or no ethanol I'm it
.regular fuel has up to 10% ethanol some premiums have less or even better
no ethanol
DDrake
73 JH
CC 26
On Aug 13, 2014, at 2:16 PM, Russ Melody via CnC-List
cnc-list@cnc-list.com wrote:
Hi Danny,
The thickness is 3/4 .
I can't get to the boat to take pics for a while,but what cut outs do you mean?
My sole has a table holder,a bilge cover with a finger hole .Only the bilge
cover is not screwed down in place
DDrake
73 JH
CC 26
On Jun 10, 2014, at 11:17 AM, Evan Morgan via CnC-List
Just an after thought,the 3/4 teak and Holly is very expensive .i would suggest
laminating a 1/4 T Holly to a piece of plain 1/2 marine grade ply
DDrake
73 JH
CC 26
On Jun 10, 2014, at 11:17 AM, Evan Morgan via CnC-List
cnc-list@cnc-list.com wrote:
Good morning,
Quick request of my
I use mine as a ice box but it'd rains overboard ,not into the bilge
DDrake
73 JH
CC 26
On May 23, 2014, at 6:45 PM, Evan Morgan via CnC-List cnc-list@cnc-list.com
wrote:
Just re-read your original post...different setup than my 26. Wish I could
help...
From: Eric Cahn via CnC-List
Thanks for posting this
It is a nice blog ,I really appreciated the work she undertook on the hull and
her feelings about that
Been there ,done that
DDrake
73 JH
CC 26
On Apr 22, 2014, at 8:46 PM, Jean-Francois J Rivard jfriv...@us.ibm.com
wrote:
Hey, have you guys been following
Personal experience ,I have had 2 Fram oil filters blow apart at the rolled
seam .Fortunately I discovered the puddle of oil before driving away .
First time was on a Chev Cavalier ,second time on a Altima
There will never be a 3rd time
DDrake
CC 26
On Apr 4, 2014, at 11:31 AM, Rich
We run a small fleet of boats ,both sail and power .and after a directive from
Accounting we switched to regular grade fuel Maintenance costs soared by 30%
cleaning fuel systems and disposal of bad gas.
This of course does not include lost revenue and labour costs to recover
disabled boats .
Try Atkins and Hoyle ,they rebuild hatches and will sell you the gasket and the
glue
DDrake
73 JH
CC 26
On Feb 10, 2014, at 5:57 PM, g...@gspcc.net wrote:
Hello all,
Does anyone know where a replacement forward hatch for a CC 30 MK1 can be
located? I've searched and there are lots of
DDrake
73 JH
CC 26
On Feb 6, 2014, at 10:43 AM, Frederick G Street f...@postaudio.net wrote:
Do they sell those at Defender? :^)
Fred Street -- Minneapolis
S/V Oceanis (1979 CC Landfall 38) -- on the hard in Bayfield, WI :^(
On Feb 5, 2014, at 10:57 PM, Jim Watts
I used to use Brightsides and redid the boots stripe yearly .
Changed 3 years ago when I painted the boat and did the boots stripe in 2 part
Interlux Perfection .
I haven't had to redo the stripe since .I would strongly suggest switching to a
2 part paint ,in the end the added work to apply is
I stripped the entire hull down to gel coat and epoxy primed it with 2 sprayed
coats .
Painted to the water line with 2part perfection (white)
Then painted the red bootstripe ( also Perfection) over the the white.
Will is right, paint manufactures do know their products !
Is your boat painted
with solvent…be neat with taping…what is the best tape for this
job?
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Drake
Sent: February 4, 2014 2:02 PM
To: cnc-list@cnc-list.com
Cc: cnc-list@cnc-list.com
Subject: Re: Stus-List boot stripe
I used to use Brightsides
DDrake
73 JH
CC 26
On Jan 23, 2014, at 10:32 AM, Pete Shelquist pete.shelqu...@comcast.net
wrote:
I'm not sure how many other designs are like this, but the 37 doesn't have a
continuous bulk head forward by the stays. Strbd is by the hanging locker
and it T's about midway into the
The idea is right but I question the use of fibreglass panels .
I did my cutlass bearing and prop is past spring ,I used 3/8 steel plate
,might have been a little overkill
DDrake
73 JH
CC 26
On Dec 21, 2013, at 4:27 PM, Joel Aronson joel.aron...@gmail.com wrote:
I've posted two photos of
DDrake
73 JH
CC 26
On 2013-09-08, at 8:33 PM, Mike ragt...@quickclic.net wrote:
Thanks for your input.. I do like the sailor of the year.
Mike
From: Dennis C.
Sent: Sunday, September 08, 2013 2:12 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List scoring
Agree. Our club has
It s more than likely the switch itself,they have a bad habit of becoming flaky
Check the ,connections on the switch .try shorting ( bypass the switch)the
wires at the switch and see if the starter works better
DDrake
73 JH
CC 26
On 2013-08-05, at 9:38 PM, Brent Driedger
congratulations
They are great little boats !Easy to maintain ,easy to singlehand,easier to
trailer than a 41 (haha)
I do have a question though ,could you determine what diameter the main halyard
sheave is and the pin as well befor you step your mast ?
Just launched mine last Friday and find
I used Kiwi Grip when I redid my entire deck .Three seasons later it still
looks great .You have control of the amount of grip during application .I left
the cockpit seating a little on the smooth side so that it was ,more
comfortable to sit on ,the cockpit sole and fore deck I put a much
20 matches
Mail list logo