Colonial auto parts I think? No fittings though. Burnside, just off Windmill
road
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich C&C
Sent: Friday, November 16, 2012 12:41 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar exhaust mix elbow pluggage question/survey
There's a place in Halifax that sells them, under 200 I think.
On 2012-11-16, at 12:31 PM, "Robert Abbott"
mailto:robertabb...@eastlink.ca>> wrote:
Dennis:
I am in the process of replacing the SS wet exhaust muffler with a Vernalift
and, since I am working in the small space, was considering r
Hello all.
Don't know if anyone is in the market or not, but since I have decided to sell
my boat (35 Landfall in Halifax), I have a few items I will be putting up for
sale.
The first is a Michigan Sailer Two blade prop, 16"X13" RH, with a 1" taper bore.
The prop is in fantastic condition, no din
Drain your tanks and see how much rust comes out of it. Mine was plugged.
-Original Message-
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of Prime Interest
Sent: Friday, August 24, 2012 10:17 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Hot w
Water in Mahone Bay is around the 22 degrees Celsius mark these days.
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of Chuck S
Sent: Friday, August 24, 2012 10:13 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Hot water heater
Dwight,
We have the same
Does the coolant-into-the-heater loop have its own impellor or is it the
standard engine coolant pump? Is it shot?
Did the tank suddenly stop producing hot water, or slowly get cooler?
How is it when hooked to shore power and is AC heated?
It's obviously not an element if heating from shore power
Sounds like your cable outer housing has corroded through, now the inner cable
is binding. Happened to me like that.
-Original Message-
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of Indigo
Sent: Saturday, August 11, 2012 8:49 PM
To: cnc-list@cnc-
I don't have to do the
same procedure if I ever have to replace the glass again.
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
-Original Message-
From: cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com> [
mailto:cnc-list-boun...@cnc-
ON
>
> -Original Message-
> From: cnc-list-boun...@cnc-list.com
> [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Gosse, Rob
> Sent: Saturday, August 04, 2012 9:33 AM
> To:
> Subject: Re: Stus-List Stuck screw, PHRF
>
>
> If there's any of the Phi
If there's any of the Phillips head left but you can't get the screwdriver to
bite in it, if it's starting to strip, put a glob of valve grinding compound in
it then your screwdriver tip. The grit will help the screwdriver from stripping
the head.
Also try heat on the screw.
On 2012-08-04, at
10 matches
Mail list logo
