Jonathan:
Contact this guy for parts or maybe even get a price from him on a
refurbish of your hatchhe used to work for AH for many yearshis
prices are better than AH.
Gurdial Singh Channa
Hammerhead Nautical System
71 Storey Pl
MARKHAM ON L3S 3B4
www.hhns.ca
Gurdial Singh Channa
Keith says:
Safety is a wash.
you either have a 13' pole hanging on a line with both ends detached,
but unloaded.
or you have a 13' pole attached to the mast but the free end moving at a
high rate of speed toward your bowman on the pointy end.
Neither is inherently safer than the other.
mounted?
John Russo
Arpeggio
1984 CC 32
Norwalk, CT
-Original Message-
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Helen Abbott
Sent: Sunday, September 16, 2012 9:23 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Nicro Vents
The Nicro Marine
Danny:
I haven't done this in a long time since I haven't been sleeping on a
boat in a long time but when we did, at night, we would burn a high
quality candle (smoke free they claim) set inside a tin can and set the
can in the sink (should be safe from accidentally tipping over after a
day
Greg:
Not sure if you got back to the list on your water heater issue, but
just asking, did you resolve the problem? If so, what was the problem?
Bob Abbott
AZURA
CC 32 - 84
Halifax, N.S.
On 2012/08/23 10:57 PM, Greg Sutherland wrote:
We are anchored off of Masons island in Mahone Bay
I think the solar fan on our boat is a Nicrowill check
tomorrowit was installed by the original owner on the forward
hatch.the fan has been running continuously since we got the boat in
the Spring of 2006.even in the winter under the white shrinkwrap.
I hope when it decides to
Gary:
It's been a long day, and maybe, the effects an adult beverage has
provided me with an induced state of brilliance, so after reading your
description of your on board 'plumbing system', to avoid unweIcomed
effluent backup in the head, I completely understand.quite
brilliant really!
Robert:
1. Use this contact for your hatch repair:
gcha...@hhns.ca
2. Butyl tape for the toerail sealant.if the yacht shop doesn't have
any, check out the RV dealers.
3. Running rigging.you will figure that out.
Bob Abbott
AZURA
CC 32 - 84
Halifax, N.S.
On 2012/09/08
Gary:
Don't know if you are familiar with 'dry ice blasting', but with this
method, there is no 'toxic runoff'. The only residue with the removal
of antifouling paint is the 'actual antifouling paint' which can be
contained with a 'drop sheet'.
When I had my done, we picked a day with
Bob,
I have no experience with any of these products. The last time I
stripped antifouling paint was in 1991 and after that, I swore I would
never do it again.
If your budget can afford it, have someone else do it. Soda blasting is
popular. Our current boat was stripped of years of
Don:
A pressure washer will not remove an ablative paint. When our boat is
hauled every Fall, the bottom is pressure washed by the yard staff and
while it might remove a small amount of the paint, it will not remove it
so as the gelcoat is showing.
I have been using Micron CSC for the past
Rich:
Glad to hear the re-power is coming along. If you don't mind me asking,
who is doing the work on the engine?
And also, just curious, how do you think this happened one of the
pistons looked as though some water may have got in and possibly seized
a ring?
Bob Abbott
AZURA
CC 32 - 84
12 matches
Mail list logo