Stus-List Kracor Contact

About 4 years ago I got a tank for a 29-2 from Kracor Inc. The contact at that time was Dave Pfeiffer dpfeif...@kracor.com 414-355-6335 x 105 Martin C 29-2 Recalculating ___ This list is supported by the

Re: Stus-List wheel squeak

I had the rudder out of my '83 29-2 last winter. The only metal bushing/bearing is where the post comes thru the cockpit sole. There was only minimal wear on mine so I didn't replace it. The fit between the rudder post and fibreglass rudder tube is tight and there is no stuffing box like on the

Stus-List Deck Organizer Source

All I'd like to stack another deck organizer on the original. I measure the C to C dimension of the existing organizers as 2 3/8". I've been unable to find any organizers with this C-C dimension. I've looked at Harken, Schaeffer, Ronstan, Selden etc and either the dimension is wrong or not

Re: Stus-List Kanzaki transmission oil change

Regarding filling the transmission, the Yanmar manual states" Check the clutch case level without screwing in the cap" Martin C 29-2 Recalculating ___ This list is supported by the generous donations of our members. If you wish to make a

Re: Stus-List Mainsail replacement considerations

Dave Check out Precision Sails in Victoria BC. They have a great on-line site. Sails are made Asia somewhere but inspected and shipped from BC. I got a 135 and asym from them this year. Very happy with the product and price. Martin C 29-2 Recalculating MCC Toronto From: Dave S

Re: Stus-List 37+ in Etobicoke Ontario

Stop 37 is at the Etobicoke Yacht Club. (EYC). When I was a member there, I don’t recall it participating in the weeknight club races, which is consistent with the info in the ad. While I don’t know how well the boat has been maintained, I don’t think you have to worry about “rode hard and put

Re: Stus-List continuous line furlers

I have a Selden GX 7.5 on a 29-2 that I use for my assym. Pros relative to sock/snuffer are: 1. can rig at dock 2. No need to go to foredeck to release or retrieve 3. Can gybe by furling and the gybing and unfurling, if you want to 4. Can get sail in quickly if wind picks up 5. Get more use of

Re: Stus-List C and C 25 water in lockers under settees, Now Stability

ockers under settees H Martin, suggest you check out the stability diagram: http://www.cncphotoalbum.com/technical/stability.htm randy Tamanawas 29-II Hood River, OR From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Martin Kane via CnC-List Sent: Tuesday

Stus-List C and C 25 water in lockers under settees

I experienced this occasionally when I had a C 25-2. It would only happen when the sailing hard to weather with the rail buried. If I were going to tighten the hull/deck joint screws I'd start with those closest to the chainplates. This is not an issue with the 29-2 as it is a very stiff boat

Re: Stus-List Matching Traveler Track Dimensions 29 Mark II

When selecting a new traveler make sure that you’ll be open the cockpit locker after its installed. Garhauer travelers won’t work without modifying to reposition the stbd camcleat. Martin C Recalculating From: O'Keeffe Thomas [mailto:thosokee...@yahoo.com] Sent: Friday, June 03,

Re: Stus-List Soft thumping/banging when in gear at low-rpm?

I assume that you have a Yanmar transmission. The shift lever mechanism is quite complicated and Yanmar have specific requirements about the minimum length of throw from neutral to ensure full engagement of F I just spent an hour or so with my head upside down adjusting the transmission on my

Stus-List Prop Walk CC 29-2

Boat was significantly over-propped when I acquired her. Largely because transmission ratio is 2.2:1 not 2.62:1 as stamped on the casing. While the props that came with the boat (a Gori 15X10 and a 3 blade fixed 14X9) were too big, prop walk was not an issue. Just installed a Campbell Sailor

Stus-List CC 33-I Spreaders?

David You may want to contact Tim Doel at Klacko Spars klackosp...@bellnet.ca (905) 825-0015 Klacko provided the original CC masts back in the 70's and 80's. They are located on Oakville, Ontario. Martin CC 29-2 Recalculating ___ This List is

Re: Stus-List Companionway hood

Holland Marine Products in Mississauga Ontario stock rolls of 1/16 and 1/8 butyl tape. The store owner can be difficult but is the only source for 1/16 tape near Toronto that I've found. Martin Recalculating CC 29-2 Mimico Cruisng Club -Original Message- From: D Harben

Stus-List Yanmar Gear Box Mislabeled

I've owned a CC 29-2, with the 2GM engine and KM2-A gearbox for the past three years. Initially the Yanmar tach would show 2200 rom at WOT in gear and about 3400 in neutral at WOT. In year 2 I replaced the installed 14X9 three blade with a 15X10 folding prop that was spare. WOT rpms in gear

Re: Stus-List CnC-List Digest, Vol 100, Issue 24

David Here's a link to a manufacturer. http://www.davisnet.com/marine/products/list_marine.asp?grp=m22-4. Try searching under shroud roller They are very common. Bought one yesterday from a small chandlery for $6 Cdn. Martin CC 29-2 Recalculating Mimico Cruising Club martink...@sympatico.ca