Just had my rudder rebuilt by Competition Composites in Ontario. I have pics
of the interior and shaft. I had been removing the rudder every winter due to
the water in the rudderso it didn't freeze. .. kept it in the heated
garage...and let it drain a cup or more of black-brown ooze.
Had mine done. ~$5k! According to the fiberglass tech, after thorough
deconstruction the rudder was "fine" but nobody would have been able to
tell. When you go to sell the surveyor is gonna find it and the buyer's
insurance/mortgage company has a high probability of pumping the breaks
over it.
boun...@cnc-list.com] On Behalf Of DON JONSSON
via CnC-List
Sent: Wednesday, May 03, 2017 12:42 PM
To: cnc-list@cnc-list.com
Cc: DON JONSSON
Subject: Stus-List C&C 34 Moisture in rudder
Hi
I have a 1981 C&C 34 which I'm trying to sell, and now am concerned about the
issues
We do one on the bottom, one about 4-5 inches up, and one 3-4 inches from the
top. Always on the trailing edge. Use 5/16 set screws and drive them in flush.
Sent from my iPhone
On May 3, 2017, at 4:14 PM, J Roger via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:
Can I send you a PM John? Abou
Can I send you a PM John? About the C&C27 Rudder? Wondering if you could
show where to drill.Much Obliged. JB
On Wed, May 3, 2017 at 1:15 PM, John Irvin via CnC-List <
cnc-list@cnc-list.com> wrote:
> On my 27-III we had water in the rudder. When we drilled escape holes,
> one higher up to prevent
) getting it back in place after repairs.
From: DON JONSSON via CnC-List
Sent: Wednesday, May 03, 2017 12:41 PM
To: cnc-list@cnc-list.com
Cc: DON JONSSON
Subject: Stus-List C&C 34 Moisture in rudder
Hi
I have a 1981 C&C 34 which I'm trying to sell, and now am concerned about the
issue
On my 27-III we had water in the rudder. When we drilled escape holes, one
higher up to prevent vacuum effect, we tapped them. Now in the fall we pull the
set screws and water comes out - maybe a few ounces. The winter cold causes the
rest to efflorescence so in the spring we re-insert the set
Hi
I have a 1981 C&C 34 which I'm trying to sell, and now am concerned about the
issues on the boat. The biggest one is the moisture in the rudder.
About a foot up from the bottom of the rudder there has been a small quasi
hole, about 1/16th of an inch, for quite a while. When I hauled the bo