Hi, I bought mine on ebay last year. I paid 85-90 bucks shipped. It's a genuine Hitachi 55 or 60 amps fully insulated with the exact same connections / look / mounting as the original Yanmar (I think they are made by Hitachi). I took the opportunity to throw in a new belt as well. It was a plug
Take a look at Spider Marine. They have a new Hitachi 60Amp alternator for the
3GM30 listed for $120.
http://www.spidermarine.com/inventory/search/make/yanmar%20marine/model-and-submodel/3gm30/year//liters/0/engine-type/any/fuel-type/any/aspiration/a
--
Paul E
CC Landfall 38
S/V Johanna
All,
My alternator is putting out too much voltage (15 volts) It s a 35 amp
Apco with an internal regulator. Rather than trying to have it rebuilt I
am thinking of buying a new alternator. Is there a higher amp alternator
that will fit the single pulley without breaking the bank? I don't want
Good choice on the AGM. They have proved them self to me.
On Thu, Aug 14, 2014 at 9:49 AM, Joel Aronson via CnC-List
cnc-list@cnc-list.com wrote:
All,
My alternator is putting out too much voltage (15 volts) It s a 35 amp
Apco with an internal regulator. Rather than trying to have it
You can buy brand new yanmar alternators on ebay for ~$100. It sounds like
the sensing line might just be bad. Where did you measure 15v? I would
remove, clean and inspect all of the connections to the alternator. Then
with the engine off verify that the voltage at the alternator matches the
Careful getting a new alternator with internal regulator if you are
planning to get AGM batteries. The AGMs need slightly different charge
profiles to ensure maximum longevity. The charge profile of the internal
regulator won't be able to be changed. Also the internal reg won't be able
to be
, August 14, 2014 9:49 AM
Subject: Stus-List Alternator for Yanmar 3GM30
All,
My alternator is putting out too much voltage (15 volts) It s a 35 amp Apco
with an internal regulator. Rather than trying to have it rebuilt I am
thinking of buying a new alternator. Is there a higher amp
bit.
Marek
From: Josh Muckley via CnC-List
Sent: Thursday, August 14, 2014 10:23 AM
To: CC List ; Joel Aronson
Subject: Re: Stus-List Alternator for Yanmar 3GM30
Careful getting a new alternator with internal regulator if you are planning to
get AGM batteries. The AGMs need slightly
@cnc-list.com ; Joel Aronson
joel.aron...@gmail.com
*Subject:* Re: Stus-List Alternator for Yanmar 3GM30
Careful getting a new alternator with internal regulator if you are
planning to get AGM batteries. The AGMs need slightly different charge
profiles to ensure maximum longevity
Sent: Thursday, August 14, 2014 10:23 AM
To: CC List ; Joel Aronson
Subject: Re: Stus-List Alternator for Yanmar 3GM30
Careful getting a new alternator with internal regulator if you are planning
to get AGM batteries. The AGMs need slightly different charge profiles to
ensure maximum
-list@cnc-list.com ; Joel Aronson
joel.aron...@gmail.com
*Subject:* Re: Stus-List Alternator for Yanmar 3GM30
Careful getting a new alternator with internal regulator if you are
planning to get AGM batteries. The AGMs need slightly different charge
profiles to ensure maximum longevity
Alternator for Yanmar 3GM30
All,
My alternator is putting out too much voltage (15 volts) It s a 35 amp Apco
with an internal regulator. Rather than trying to have it rebuilt I am
thinking of buying a new alternator. Is there a higher amp alternator that
will fit the single pulley
Alternator for Yanmar 3GM30
All,
My alternator is putting out too much voltage (15 volts) It s a 35 amp Apco
with an internal regulator. Rather than trying to have it rebuilt I am
thinking of buying a new alternator. Is there a higher amp alternator that
will fit the single pulley without
13 matches
Mail list logo