I need to replace the shelf in the battery compartment on my other boat.
Plywood with epoxy? Starboard? Something else?
Thanks!
Joel
301 541 8551
___
This list is supported by the generous donations of our members. If you like
what we do, please he
Starboard is pretty much invulnerable to anything that comes out of a
battery. If you don't need the stiffness of plywood, I'd go with the
plastic.
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 28 March 2016 at 09:41, Joel Aronson via CnC-List
wrote:
> I need to replace the shelf in th
Interestingly I was doing inventory in my shed yesterday and ‘found’ a 2’ X 3’
sheet of 1/2” Starboard that I bought for some projects years ago. Personally,
I would not use Starboard for battery support. Too soft and bendy. And even I
would balk at the price.
I just used regular good quality p
Joel — I’m with Dave — Starboard will sag under the weight of batteries. See
if somebody at one of the marinas or boatyards around you has a partial sheet
of 19mm marine ply, cut it to fit and either paint or epoxy-coat it. I think
you’ll be much happier with the results. And it’ll weigh a wh
h 28, 2016 12:41
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Stus-List Best material for battery compartment shelf?
I need to replace the shelf in the battery compartment on my other boat.
Plywood with epoxy? Starboard? Something else?
Thanks!
Joel
301 541
C-List
Sent: Monday, March 28, 2016 12:41
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Stus-List Best material for battery compartment shelf?
I need to replace the shelf in the battery compartment on my other boat.
Plywood with epoxy? Starboard? Something else?
Thanks!
Delrin®, an industry-trusted name for acetal homopolymer. Delrin® is a tough,
machinable thermoplastic with a high modulus of elasticity, high strength, good
rigidity, dimensional stability, and resistances to moisture, chemicals and
solvents. It has desirable toughness properties, performing
ff or similar would barely notice the battery weight
> IMHO.
>
> Charlie Nelson
>
>
>
> cenel...@aol.com <mailto:cenel...@aol.com>
>
>
> -Original Message-
> From: Jake Brodersen via CnC-List
> To: cnc-list
> Cc: Jake Brodersen
> Sen
No homopolymer is going to spend the night on my boat if I know about it! :)
Cheers, Russ
At 06:51 PM 28/03/2016, you wrote:
Delrin®, an industry-trusted name for acetal
homopolymer. Delrin® is a tough, machinable
thermoplastic with a high modulus of elasticity,
high strength, go
http://www.mcmaster.com/#fiberglass-sheets/=11qrb3r
Dennis C.
___
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
tteries in proper plastic battery
boxes, fastened to the shelf using proper straps.
Chuck S
- Original Message -
From: "Joel Aronson via CnC-List"
To: cnc-list@cnc-list.com
Cc: "Joel Aronson"
Sent: Monday, March 28, 2016 12:41:12 PM
Subject: Stus-List Best mat
Mine collapsed last year too. I replaced it with 3/4” ply epoxied both sides,
and custom fit it to accommodate one more 27 series battery.
Mike Amirault
C&C33ii Lovely Cruise
SMSC ___
This list is supported by the generous donations of our members. If
12 matches
Mail list logo