t;
> Rick Taillieu
> Boatless
> Leamington, Ontario
>
>
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
> Anthony Coppola via CnC-List
> Sent: July-13-19 23:58
> To: cnc-list@cnc-list.com
> Cc: Anthony Coppola
&
Cc: Anthony Coppola
Subject: Stus-List CBC 26 rudder post
Can someone with a cnc 26 (1978) send me a picture of the rudder post/ tiller
attachment. I recently purchased a 26 and the post is just a tube with a hole
drilled in it for the screw that holds the tiller handle. It doesn’t look
right
Wish I'd seen this earlier, just got home from working on my '78 26.
Mine does have a fitting and cover.
I'll make sure to go by tomorrow and take a few pics.
I've been doing a lot of "40-year maintenance" this past year and if you
have any questions feel free to contact me.
305-761-8098
Jim
Thanks Josh. Could be the same “cheap” set up.
Tony Coppola
On Sun, Jul 14, 2019 at 6:07 AM Josh Muckley via CnC-List <
cnc-list@cnc-list.com> wrote:
> Not a C but my MacGregor 26 had a stainless steel tube with a hole
> drilled through for the tiller handle. Cheap... But it worked.
>
> Josh
Not a C but my MacGregor 26 had a stainless steel tube with a hole
drilled through for the tiller handle. Cheap... But it worked.
Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD
On Sat, Jul 13, 2019, 11:58 PM Anthony Coppola via CnC-List <
cnc-list@cnc-list.com> wrote:
> Can someone with a
Can someone with a cnc 26 (1978) send me a picture of the rudder post/ tiller
attachment. I recently purchased a 26 and the post is just a tube with a hole
drilled in it for the screw that holds the tiller handle. It doesn’t look
right. Shouldn’t it have some kind of fitting on top of the post
