ake pump for the head, which I disconnect from the thru-hull and run
> antifreeze through.
>
> *From:* robert via CnC-List
> *Sent:* Tuesday, October 10, 2017 9:07 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* robert
> *Subject:* Stus-List Fresh water plumbing winterizing
>
That’s more or less what I do. The only addition is that I have a water intake
pump for the head, which I disconnect from the thru-hull and run antifreeze
through.
From: robert via CnC-List
Sent: Tuesday, October 10, 2017 9:07 AM
To: cnc-list@cnc-list.com
Cc: robert
Subject: Stus-List Fresh
Jim, my appt is at 9:40 so noon is OK.
From: CnC-List on behalf of robert via CnC-List
Sent: Tuesday, October 10, 2017 9:07:24 AM
To: cnc-list@cnc-list.com
Cc: robert
Subject: Stus-List Fresh water plumbing winterizing
Tom:
My system is pretty simple, however
Tom:
My system is pretty simple, however, I use approx. +3 gallons of
plumbers antifreeze.I find it on sale for about $5 gal..I always
buy 4 gals. and use most of it.
I empty the tank by turning on a tap in the galley and maybe one in the
head. I then climb into the port lazarette t
stuff!
Regards,
Bill Coleman C&C 39
Original message
From: Josh Muckley via CnC-List
Date: 10/9/17 17:12 (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: Josh Muckley
Subject: Re: Stus-List Fresh water plumbing winterizing
Instead of an air compressor I use a shop vac set on blo
October 9, 2017 5:13 PM
To: cnc-list@cnc-list.com
Cc: Josh Muckley
Subject: Re: Stus-List Fresh water plumbing winterizing
Instead of an air compressor I use a shop vac set on blow instead of suck. I
have fewer fears of over pressuring the system and a small 1 gallon shop vac is
great for aroun
via CnC-List
To: cnc-list@cnc-list.com
Cc: Josh Muckley
Sent: Monday, October 9, 2017 5:13 PM
Subject: Re: Stus-List Fresh water plumbing winterizing
Instead of an air compressor I use a shop vac set on blow instead of suck. I
have fewer fears of over pressuring the system and a small 1
that you need to winterise properly the
>> head. It is not enough to just put some AF into the bowl and pump it out.
>> You need to put AF into the supply side, as well.
>>
>>
>>
>> If this list scares you, it should not; it is much easier than it sounds.
>&g
ugh to just put some AF into the bowl and pump it out.
> You need to put AF into the supply side, as well.
>
>
>
> If this list scares you, it should not; it is much easier than it sounds.
>
>
>
> Marek
>
>
>
> 1994 C270 ”Legato”
>
> Ottawa, ON
>
>
d)
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tom Lynch
via CnC-List
Sent: Monday, October 9, 2017 14:59
To: cnc-list@cnc-list.com
Cc: Tom Lynch
Subject: Stus-List Fresh water plumbing winterizing
What's the best practice for Winterizing the fresh water system?
What's the best practice for Winterizing the fresh water system?
My system:
40 gallon tank estimated
Water heater
Pressurized water pump
2 fixtures hot / cold from the pump
1 fixture in the galley from a foot pump.
My boat is on Lake Superior northern WI. And no I cannot sail it to warmer
clima
11 matches
Mail list logo