Re: Stus-List New Stripin g...

iling Halifax *From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *svpegasus38 via CnC-List *Sent:* Tuesday, October 17, 2017 12:41 PM *To:* cnc-list@cnc-list.com *Cc:* svpegasus38 *Subject:* Re: Stus-List New Stripin g... I used a heat gun, and plastic scraper to remove my old gra

Re: Stus-List New Stripin g...

: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of svpegasus38 via CnC-List Sent: Tuesday, October 17, 2017 12:41 PM To: cnc-list@cnc-list.com Cc: svpegasus38 Subject: Re: Stus-List New Stripin g... I used a heat gun, and plastic scraper to remove my old graphics, to remove the old

Re: Stus-List New Stripin g...

ject: Re: Stus-List New Stripin g... Like Gary said, use a 3M Stripe Off wheel and a drill. It was recommended by the guy that painted my boat and it really works. Took my cove stripe off quickly and completely with no damage to underlying paint. It's just a big round gum eraser. Dennis

Re: Stus-List New Stripin g...

Like Gary said, use a 3M Stripe Off wheel and a drill. It was recommended by the guy that painted my boat and it really works. Took my cove stripe off quickly and completely with no damage to underlying paint. It's just a big round gum eraser. Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue,

Re: Stus-List New Stripin g...

Behalf Of Matthew L. Wolford via CnC-List Sent: Tuesday, October 17, 2017 11:15 AM To: cnc-list@cnc-list.com Cc: Matthew L. Wolford Subject: Re: Stus-List New Stripin g... Somebody makes a spray-on graphics remover that I used a few years ago. It worked well as I recall, although multiple

Re: Stus-List New Stripin g...

Use a 3M Stripe off wheel. See here . It is safe for Awlgrip and gelcoat. It sounds scary, but it is much easier and safer than a heat gun.

Re: Stus-List New Stripin g...

message From: "Matthew L. Wolford via CnC-List" Date: 10/17/17 08:14 (GMT-08:00) To: cnc-list@cnc-list.com Cc: "Matthew L. Wolford" Subject: Re: Stus-List New Stripin g... Somebody makes a spray-on graphics remover that I used a few years ago.  It worked well a

Re: Stus-List New Stripin g...

-List Sent: Tuesday, October 17, 2017 10:52 AM To: cnc-list@cnc-list.com Cc: David Subject: Re: Stus-List New Stripin g... Andy, Thanks but I speak of overlaying the stripes/stars and not the name and hailing port. It seems that getting the striping out of the recesses will be much harder than

Re: Stus-List New Stripin g...

That's why I used quotation marks. Obviously just another hack! Andy C&C 40 Peregrine On Tue, Oct 17, 2017 at 10:45 AM, Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > What does THAT guy know? :) > > Joel > > >

Re: Stus-List New Stripin g...

. Risch (401) 419-4650 (cell) From: CnC-List on behalf of Andrew Burton via CnC-List Sent: Tuesday, October 17, 2017 10:41 AM To: cnc-list@cnc-list.com Cc: Andrew Burton Subject: Re: Stus-List New Stripin g... No, you'll get an uneven finish on the new gra

Re: Stus-List New Stripin g...

What does THAT guy know? :) Joel Virus-free. www.avg.com <#DAB4FAD8-2D

Re: Stus-List New Stripin g...

No, you'll get an uneven finish on the new graphics. You'll also be sticking the nice new stuff to lettering stuck on with old glue. here are some tips from one of Sail Magazine's "experts." :) https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering Andy C&C 40 Peregrine On Tue, O

Stus-List New Stripin g...

So I am putting on new name graphics and hull striping. Assuming a good clean of the old striping, could I not lay the new over the old and eliminate the seemingly arduous (it being in a recess) step of removing it all? Thanks in advance ___ The b