Head of St. Margaret's Bay, NS
From: CnC-List [ mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ
Melody
Sent: April 13, 2013 10:59 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List New through hull transducer
Hi Dwight,
Don't these inside hull installations need
-list.com] *On Behalf Of *Russ
Melody
*Sent:* April 13, 2013 10:59 AM
*To:* cnc-list@cnc-list.com
*Subject:* Re: Stus-List New through hull transducer
** **
Hi Dwight,
Don't these inside hull installations need to be in a solid layup area
and not a cored hull area?
I seemed to remember
The notes on the Garmin cut sheet say to epoxy the tank to the hull. It's a
confusing world!
Rich Knowles
Indigo. LF38
Halifax
On 2013-04-15, at 10:10, Bill Bina billb...@sbcglobal.net wrote:
The warning is to not use epoxy for gluing this specific tank style mount to
the hull before filling
** **
--
*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Russ
Melody
*Sent:* April 13, 2013 10:59 AM
*To:* cnc-list@cnc-list.com
*Subject:* Re: Stus-List New through hull transducer
** **
Hi Dwight,
Don't these inside hull installations
Head of St. Margaret's Bay, NS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts
Sent: April 14, 2013 12:31 PM
To: 1 CnC List
Subject: Re: Stus-List New through hull transducer
If going in-hull, you can test your location while in the water by placing
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts
Sent: April 14, 2013 12:31 PM
To: 1 CnC List
Subject: Re: Stus-List New through hull transducer
If going in-hull, you can test your location while in the water by placing a
baggie of water between the transducer and the hull. If it works
-list.com
*Subject:* Re: Stus-List New through hull transducer
** **
Hi Dwight,
Don't these inside hull installations need to be in a solid layup area and
not a cored hull area?
I seemed to remember that detail being part of past discussions on this
subject.
****Cheers, Russ
MKII, Alianna
Head of St. Margaret's Bay, NS
** **
--
*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Russ
Melody
*Sent:* April 13, 2013 10:59 AM
*To:* cnc-list@cnc-list.com
*Subject:* Re: Stus-List New through hull transducer
-list.com] On Behalf Of Russ Melody
Sent: April 13, 2013 10:59 AM
To: mailto:cnc-list@cnc-list.comcnc-list@cnc-list.com
Subject: Re: Stus-List New through hull transducer
Hi Dwight,
Don't these inside hull installations need to
be in a solid layup area and not a cored hull area?
I seemed
-list.com] On Behalf Of jmckay533
Sent: April 12, 2013 10:36 PM
To: cnc-list@cnc-list.com
Subject: Stus-List New through hull transducer
Good evening. I AM HOPING TO INSTALL A NEW THROUGH HULL TRANSDUCER this
weekend. What marine sealant would you suggest?
Thank you.
John on Oxygen
-list.com
Subject: Stus-List New through hull transducer
Good evening. I AM HOPING TO INSTALL A NEW THROUGH HULL TRANSDUCER this
weekend. What marine sealant would you suggest?
Thank you.
John on Oxygen
Sent from Samsung tablet
Original message
From
for that
transducer
Dwight Veinot
CC 35 MKII, Alianna
Head of St. Margaret's Bay, NS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jake
Brodersen
Sent: April 13, 2013 8:59 AM
To: 'jmckay533'; cnc-list@cnc-list.com
Subject: Re: Stus-List New through hull transducer
] On
Behalf Of Jake Brodersen
Sent:
April 13, 2013 8:59 AM
To:
'jmckay533'; cnc-list@cnc-list.com
Subject:
Re: Stus-List New through
New through hull transducer
I used to mount them inside the hull in a blob of clear silicone, until I
had a couple of cases where after a year, or two, or three, the face of the
transducer would separate slightly from the silicone and stop working,
either intermittently, or completely. You
-list.comReply To: cnc-list@cnc-list.comSubject: Re: Stus-List New through hull transducer
Yes Bill, I could not remember who but I
guess it was your advice that I intend to follow this year with the epoxy
mountâ¦I have 2 transducers and a quick change over capability because I
only have one
] On Behalf Of jmckay533
Sent: April 12, 2013 10:36 PM
To: cnc-list@cnc-list.com
Subject: Stus-List New through hull transducer
Good evening. I AM HOPING TO INSTALL A NEW
THROUGH HULL TRANSDUCER this weekend. What marine sealant would you suggest?
Thank you.
John on Oxygen
Sent from Samsung tablet
MKII, Alianna
Head of St. Margaret's Bay, NS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Russ
Melody
Sent: April 13, 2013 10:59 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List New through hull transducer
Hi Dwight,
Don't these inside hull
4200.
Joel Aronson
35/3
Annapolis
On Apr 12, 2013, at 9:36 PM, jmckay533 jmckay...@yahoo.ca wrote:
Good evening. I AM HOPING TO INSTALL A NEW THROUGH HULL TRANSDUCER this
weekend. What marine sealant would you suggest?
Thank you.
John on Oxygen
Sent from Samsung tablet
18 matches
Mail list logo
