M
To: cnc-list@cnc-list.com
Cc: Dave Godwin
Subject: Re: Stus-List Repainting Waterline Stripe...
What Andy said. I use 3/4” tape and it works (curves..) just fine.
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit<http://roninrebuild.blogspot.com/>
On Se
..@cnc-list.com>] On Behalf Of Dave Godwin via CnC-List
> Sent: Tuesday, September 20, 2016 11:45 AM
> To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
> Cc: Dave Godwin
> Subject: Re: Stus-List Repainting Waterline Stripe...
>
>
> David,
>
>
> I
4650 (cell)
>
>
> To: cnc-list@cnc-list.com
> Date: Tue, 20 Sep 2016 14:50:57 +
> Subject: Re: Stus-List Repainting Waterline Stripe...
> From: cnc-list@cnc-list.com
> CC: mike.h...@impgroup.com
>
> You can get painter masking tape as think as ¼ inch. Use that for t
s
> always worked for me when painting decks, etc …
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Dave
> Godwin via CnC-List
> *Sent:* Tuesday, September 20, 2016 11:45 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Dave Godwin
> *Subject:* Re: Stus-
-list-boun...@cnc-list.com]
On Behalf Of Dave Godwin via CnC-List
Sent: Tuesday, September 20, 2016 11:45 AM
To: cnc-list@cnc-list.com
Cc: Dave Godwin
Subject: Re: Stus-List Repainting Waterline Stripe...
David,
I’d spend the few extra bucks and get a good 3M tape. I just did some Awl
: Tuesday, September 20, 2016 11:45 AM
To: cnc-list@cnc-list.com
Cc: Dave Godwin
Subject: Re: Stus-List Repainting Waterline Stripe...
David,
I’d spend the few extra bucks and get a good 3M tape. I just did some Awlcraft
painting for gloss and non-skid on my hatches and I used the Awlgrip (and my
David,
I’d spend the few extra bucks and get a good 3M tape. I just did some Awlcraft
painting for gloss and non-skid on my hatches and I used the Awlgrip (and my
painter) recommended 3M 218 Fine Line tape for masking the gloss vs. non-skid
prior to spraying. I’ll be masking off the entire deck
radically to
> maintain visual width when hull tucks under).
>
> This is my solution.
>
> Thanks!
>
> David F. Risch
> (401) 419-4650 (cell)
>
>
> --
> To: cnc-list@cnc-list.com
> Date: Mon, 19 Sep 2016 19:42:14 -0400
> Subject: Re
, 19 Sep 2016 19:42:14 -0400
Subject: Re: Stus-List Repainting Waterline Stripe...
From: cnc-list@cnc-list.com
CC: schil...@bloomingdalecom.net
Glenn Gambell from the list turned me on to using
electrical tape to mask the boot strip. extremely flexible and
cheap, if
Glenn Gambell from the list turned me on to using electrical tape to
mask the boot strip. extremely flexible and cheap, if there is a
Harbour Freight nearby.
Neil Schiller
1970 Redwing 35, Hull #7
(C&C 35, Mark I)
"Corsair"
On 9/19/2016 2:44 PM, Andrew Burton via CnC-List wrote:
Yes, tape the
illay
Subject: Re: Stus-List Repainting Waterline Stripe...
David,
Interlux Brightside. Light sanding should do you fine. Plan on several coats.
http://www.defender.com/product.jsp?path=-1%7C2200442%7C2200472%7C2200473&id=735288
All the best,
Edd
Edd M. Schillay
Starship Enterprise
C&C
Yes, tape the stripes then sand up to them. I'd say wet sand with 220 or
320, depending on how much shine you're after. If the tape edge gets messed
up, just re-tape it before you paint.
I'd use awl grip, again. I would call the techs at the company and ask if
you need to prime over the old awl gri
David,
Interlux Brightside. Light sanding should do you fine. Plan on several coats.
http://www.defender.com/product.jsp?path=-1%7C2200442%7C2200472%7C2200473&id=735288
All the best,
Edd
Edd M. Schillay
Starship Enterprise
C&C 37+ | Sail No: NCC-1701-B
City Island, NY
Starship Enterpris
Want to freshen up Awlgriped water line stripes.
I assume I need to sand it but do not want to sand the topsides or the blue
stripe between the two white stripes. I will be taping of course but just sand
over tape? Wont the sanding affect the tapes edge and therefore the ultimate
paint line
14 matches
Mail list logo