Hi David, I'm with Josh on this.
We had ours taken to the gelcoat last spring as well (Apparently the 1st
time ever on my boat..) it had the original old style tar looking barrier
coat stuff which had peeled off in multiple places.. The only sign of a
possible blister was one little pin-pri
Engine paint and yes lots of older boats with no barrier coat and no
problems
On Sunday, November 30, 2014, David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi all- Now that the boat is put to rest for the winter, I am thinking
> about new projects for the spring.
>
> 1- There are a fe
"CNC boat owners, cnc-list"
To: "CNC boat owners, cnc-list"
Sent: Sunday, November 30, 2014 5:27:35 PM
Subject: Re: Stus-List Two paint questions
Hi all- Now that the boat is put to rest for the winter, I am thinking about
new projects for the spring.
1- There are a few
The PO of my boat was indiscriminate about the application of Yanmar Grey
to the engine, wiring, belts, hoses, etc. When I get around to it I'll
get the engine warm and use a degreaser (maybe just 409) then rinse it
off. The warm engine will dry quickly and be ready for more indiscriminate
spray
nc-list"
To: "CNC boat owners, cnc-list"
Sent: Sunday, November 30, 2014 5:27:35 PM
Subject: Re: Stus-List Two paint questions
Hi all- Now that the boat is put to rest for the winter, I am thinking about
new projects for the spring.
1- There are a few spots where connections hav
No barrier is "normal" and acceptable. Certain composites and gelcoats are
more susceptible to blisters than others. A lot of people/builders simply
monitor for signs of blisters and then repair them with barrier coat. Our
series of 37+ and 34+ where supposed to be built with one of the less
sus
unday, November 30, 2014 5:28 PM
To: CnC CnC discussion list
Subject: Re: Stus-List Two paint questions
Hi all- Now that the boat is put to rest for the winter, I am thinking about
new projects for the spring.
1- There are a few spots where connections have leaked in the engine
compa
Hi all- Now that the boat is put to rest for the winter, I am thinking about
new projects for the spring.
1- There are a few spots where connections have leaked in the engine
compartment and the paint is peeling off the metal. What kind of paint would
be appropriate to repair this with to k
