I’ve done window replacements with Plexus before, which set pretty quickly, so
just having a couple helpers hold the windows in place for fifteen or twenty
minutes did the trick.
Having said that, I replaced the fixed windows on my LF38 this past spring, and
used the VHB tape method; no need fo
On Thu, Sep 1, 2016 at 9:17 AM, robert via CnC-List
wrote:
> One of the challenges is holding the new windows in place while the
> adhesive cures and the forward window(s) must fit into a cavity that has
> slight curve to it.I did the job in the Spring when the boat was under
> shrink wrap, w
*Sent:* Tuesday, August 30, 2016 5:11 PM
*To:* cnc-list@cnc-list.com
*Cc:* amira...@bellaliant.net
*Subject:* Re: Stus-List Window Leak
I agree with Alan; more screws are just going to make the leak worse.
Get rid of the screws, fill the holes and glue the window with Sika,
or Dow795 or VHB tape.
_
The owner of a small sport boat hired me to remove the ports that were
screwed in by a boatyard and restore them to the original glued in ports.
Looked a LOT better. Sport boat manufacturer uses marine silicon. I used
black LifeSeal. The port were not structural.
Dennis C.
On Wed, Aug 31, 2016
lie Nelson
Water Phantom
1995 C&C 36 XL/kcb
cenel...@aol.com
-Original Message-
From: Hoyt, Mike via CnC-List
To: cnc-list
Cc: Hoyt, Mike
Sent: Wed, Aug 31, 2016 10:19 am
Subject: Re: Stus-List Window Leak
Hmmm … beg to differ
Over the years I have heard too many stories
t-boun...@cnc-list.com] On Behalf Of mike
amirault via CnC-List
Sent: Tuesday, August 30, 2016 5:11 PM
To: cnc-list@cnc-list.com
Cc: amira...@bellaliant.net
Subject: Re: Stus-List Window Leak
I agree with Alan; more screws are just going to make the leak worse. Get rid
of the screws, fill the hol
, 2016 4:11 PM
*To:* cnc-list@cnc-list.com
*Cc:* amira...@bellaliant.net
*Subject:* Re: Stus-List Window Leak
I agree with Alan; more screws are just going to make the leak worse.
Get rid of the screws, fill the holes and glue the window with Sika,
or Dow795 or
2209190> &d=1472209190
Petar Horvatic
Sundowner
76 C&C 38MkII
Newport, RI
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of mike
amirault via CnC-List
Sent: Tuesday, August 30, 2016 4:11 PM
To: cnc-list@cnc-list.com
Cc: amira...@bellaliant.net
Subject: Re:
I agree with Alan; more screws are just going to make the leak worse. Get rid
of the screws, fill the holes and glue the window with Sika, or Dow795 or VHB
tape.___
This list is supported by the generous donations of our members. If you like
what we d
Sorry, you are correct. Polycarbonate
Original message
From: Bill Bina - gmail via CnC-List
Date: 08-30-2016 9:30 AM (GMT-08:00)
To: cnc-list@cnc-list.com
Cc: Bill Bina - gmail
Subject: Re: Stus-List Window Leak
Polysulfide is not compatible
with
.in.gibsons via CnC-List wrote:
Polysulfate is the best for lexan. You can also use butly puddy
Original message
From: "Hoyt, Mike via CnC-List"
Date: 08-30-2016 6:58 AM (GMT-08:00)
To: cnc-list@cnc-list.com
Cc: "Hoyt, Mike"
Subject: Re: Stus-List Window Leak
Polysulfate is the best for lexan. You can also use butly puddy
Original message
From: "Hoyt, Mike via CnC-List"
Date: 08-30-2016 6:58 AM (GMT-08:00)
To: cnc-list@cnc-list.com
Cc: "Hoyt, Mike"
Subject: Re: Stus-List Window Leak
If they are simpl
minutes per
window.
Mike
Persistence
Halifax
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of ALAN BERGEN
via CnC-List
Sent: Monday, August 29, 2016 7:37 PM
To: C&C
Cc: ALAN BERGEN
Subject: Stus-List Window Leak
Quick fixes rarely last very long. However, if it's
Quick fixes rarely last very long. However, if it's just till the end of
the season, try using vinyl tape. The more screws you have, the more
problems you'll have.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
I finally got to looking at the windows again. The screws are about 12"
apa
14 matches
Mail list logo
