ough hull valve.
Martin
Calypso
1971 C&C 43
Seattle
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman
Sent: Thursday, November 14, 2013 7:15 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List further questions about replacing the bellows on a PYI
shaft seal
You would
...@cnc-list.com] *On Behalf Of *Bill
> Coleman
> *Sent:* Thursday, November 14, 2013 10:15 AM
>
> *To:* cnc-list@cnc-list.com
> *Subject:* Re: Stus-List further questions about replacing the bellows on
> a PYI shaft seal
>
>
>
> You would think, but I don’t see it on their
just use normal hose!
Joe Della Barba
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman
Sent: Thursday, November 14, 2013 10:15 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List further questions about replacing the bellows on a PYI
shaft seal
You would thi
3 9:57 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List further questions about replacing the bellows on a
PYI shaft seal
PYI must have considered this..?
Rich
On Nov 14, 2013, at 10:43, "Bill Coleman" wrote:
Has anyone ever seen a Silicone bellows, or similar that could be use
13 11:24 AM
> To: 1 CnC List
> Subject: Re: Stus-List further questions about replacing the bellows on a PYI
> shaft seal
>
> The usual method is to use longer bolts in the coupler with a good solid
> socket in the middle. As you tighten the coupler on the shaft up to the other
>
Coleman
C&C 39 animated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts
Sent: Monday, November 11, 2013 11:24 AM
To: 1 CnC List
Subject: Re: Stus-List further questions about replacing the bellows on a
PYI shaft seal
The usual method is to use lo
Makes more sense then my contraption! I less hole to drill and no threads
needed!
Joel
On Mon, Nov 11, 2013 at 2:01 PM, Bill Connon wrote:
> Eric Frank wrote:
>
>> Thanks to the list's advice last week about getting the bolts loose on
>> the universal to shaft coupling, I got them all out wit
Ty alternate applications of hear and cold, using a prop puller.
From: Bill Connon
To: cnc-list@cnc-list.com
Sent: Monday, November 11, 2013 2:01:04 PM
Subject: Re: Stus-List further questions about replacing the bellows on a PYI
shaft seal
Eric Frank wrote:
> Thanks to the list'
Eric Frank wrote:
Thanks to the list's advice last week about getting the bolts loose on the
universal to shaft coupling, I got them all out with an impact wrench. Worked
beautifully. But now I am stuck again getting the shaft coupling off the prop
shaft. Removed the bolts that grip the coup
t: Monday, November 11, 2013 7:23 AM
To: CnC-List@cnc-list.com
Subject: Stus-List further questions about replacing the bellows on a PYI shaft
seal
Thanks to the list's advice last week about getting the bolts loose on the
universal to shaft coupling, I got them all out with an impact w
Date: Mon, 11 Nov 2013 10:44:55 -0500
From: joel.aron...@gmail.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List further questions about replacing the bellows on a PYI
shaft seal
Eric,
IF PB Blaster doesn't work, you might try heat on the coupler. Get two pipe
wrenches - shaf
The usual method is to use longer bolts in the coupler with a good solid
socket in the middle. As you tighten the coupler on the shaft up to the
other half the socket pushes the shaft out. If that doesn't work, it's
usually cut-off wheel time.
A better penetrating oil than PB Blaster is a 50/50 mix
Eric,
IF PB Blaster doesn't work, you might try heat on the coupler. Get two
pipe wrenches - shaft and coupler. Heat and twist.
If that fails, use a gear puller or make one with a small piece of 1/4 inch
thick metal, drill holes to match the coupler and a threaded center hole
for a decent size b
Thanks to the list's advice last week about getting the bolts loose on the
universal to shaft coupling, I got them all out with an impact wrench. Worked
beautifully. But now I am stuck again getting the shaft coupling off the prop
shaft. Removed the bolts that grip the coupling to the shaft an
14 matches
Mail list logo
