-rings. WTF??? Good thing I looked now!
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Andrew
Burton via CnC-List
Sent: Tuesday, August 25, 2015 11:09 AM
To: cnc-list@cnc-list.com
Cc: Andrew Burton
Subject: Re: Stus-List knotmeter malfunction
The paddle wheel
gt; - Original Message -----
> From: Monty Schumpert via CnC-List
> To: cnc-list@cnc-list.com
> Cc: Monty Schumpert
> Sent: Tuesday, August 25, 2015 10:45 AM
> Subject: Re: Stus-List knotmeter malfunction
>
> Joe,
> I had the same symptoms with my knotmeter last
spot to block it and
the yard washed the bottom so it was gone when I got there.
Joe Della Barba
Coquina
CC 35 MK I
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Russell
via CnC-List
Sent: Monday, August 24, 2015 8:03 PM
To: CC List
Cc: Gary Russell
Subject: Re: Stus-List
-list.com
Cc: Monty Schumpert
Sent: Tuesday, August 25, 2015 10:45 AM
Subject: Re: Stus-List knotmeter malfunction
Joe,
I had the same symptoms with my knotmeter last week. The boat had been unused
for several weeks with the bung installed. I installed the transducer(s) before
leaving
Joe,
I had the same symptoms with my knotmeter last week. The boat had been
unused for several weeks with the bung installed. I installed the
transducer(s) before leaving the dock and the knotmeter read zero until we
had covered about 5 miles when it started reading correctly. I assumed
there was
a new wheel...
no help. (Nexus)
Gary
30-1
Weedy mid-Chesapeake
- Original Message -
From: Monty Schumpert via CnC-List
To: cnc-list@cnc-list.com
Cc: Monty Schumpert
Sent: Tuesday, August 25, 2015 10:45 AM
Subject: Re: Stus-List knotmeter malfunction
Joe,
I had the same
Joe,
It does not take much growth for my paddlewheel to stop spinning. If your
is fuzzy it might be that simple.
Many divers won't clean a boat with ablative paint. Maybe time to switch
while there is no build-up. I've had good luck with Trinidad SR, but the
price is through the roof.
Joel
Maybe a silly question; but was it installed in the correct orientation
(pointing forward)?
Fred Street -- Minneapolis
S/V Oceanis (1979 CC Landfall 38) -- Bayfield, WI
On Aug 24, 2015, at 4:00 PM, Della Barba, Joe via CnC-List
cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com wrote:
Any
Coquina just got hauled this morning. Now I can go over and see why my
knotmeter reads 0 underway, but if I pull the impellor out and spin it the
readings are good. Any ideas why the paddlewheel spins freely in my hand but
not in the water???
BTW – the diver that cleaned my bottom said now I
Joe,
What kind brand of knot meter?
Gary
S/V Expresso
~~~_/)~~
On Mon, Aug 24, 2015 at 5:00 PM, Della Barba, Joe via CnC-List
cnc-list@cnc-list.com wrote:
Coquina just got hauled this morning. Now I can go over and see why my
knotmeter reads 0 underway, but if I pull the
10 matches
Mail list logo