thin layer of fresh butyl
>> each year. Easy to remove and clean.
>>
>>
>> It would also work with your setup, but if you want to remove then as i
>> do, i guess you would need to live with recessed esxposed fasteners in the
>> cabin...
>>
>>
>> Brun
Cc: Bruno Lachance
Subject: Re: Stus-List putting teek hand rails back together - tips
Gary, your solution sounds even better, I doubt you will ever have the spinning
issue. The only advantage I see in my setup is that I can set the handrail with
the bolt aligned in the holes, push it down and
_
De : CnC-List
mailto:cnc-list-boun...@cnc-list.com>> de la
part de Joseph Bognar via CnC-List
mailto:cnc-list@cnc-list.com>>
Envoyé : 21 mars 2017 13:18
À : cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc : Joseph Bognar
Objet : Re: Stus-List putting teek hand rails back to
---
> *De :* CnC-List de la part de Joseph
> Bognar via CnC-List
> *Envoyé :* 21 mars 2017 13:18
> *À :* cnc-list@cnc-list.com
> *Cc :* Joseph Bognar
> *Objet :* Re: Stus-List putting teek hand rails back together - tips
>
> I did this on my 79 30 Mk 1 also.
De : CnC-List de la part de Joseph Bognar via
CnC-List
Envoyé : 21 mars 2017 13:18
À : cnc-list@cnc-list.com
Cc : Joseph Bognar
Objet : Re: Stus-List putting teek hand rails back together - tips
I did this on my 79 30 Mk 1 also. A small flathead screwdriver in the hole
30-1 #7
> Ken Caryl, CO
>
> From: "Steven Tattrie via CnC-List"
> To: "cnc-list"
> Cc: "Steven Tattrie"
> Sent: Tuesday, March 21, 2017 10:45:40 AM
> Subject: Stus-List putting teek hand rails back together - tips
>
> Hello all,
>
&g
: Tuesday, March 21, 2017 2:06 PM
To: cnc-list
Cc: RANDY; Steven Tattrie
Subject: Re: Stus-List putting teek hand rails back together - tips
Hi Steve,
I'll be fastening Grenadine's new exterior handrails in a couple weeks. She's
a 30-1, hull #7, built September 1972. I'm pretty su
les
in the exterior handrails as necessary.
Cheers,
Randy Stafford
S/V Grenadine
C&C 30-1 #7
Ken Caryl, CO
- Original Message -
From: "Steven Tattrie via CnC-List"
To: "cnc-list"
Cc: "Steven Tattrie"
Sent: Tuesday, March 21, 2017 10:45:40 AM
Hello all,
I removed teak hand rails from my C&C30 MK1 1979 last fall. There is an
inside and outside rail that are both fastened together by the same bolt
and nut (inside nut). Both ends are recessed into the rail with teak plug
to fill the hole.
I haven't tried to install them back yet however,
