On Jan 14, 2008 8:32 PM, Jeremiah Flerchinger
<[EMAIL PROTECTED]> wrote:
> > Can you generate CAM paths with Blender?
> >
> What type of CAM files/input do you have in mind? I know both Blender &
> AOI support .stl files and a few others. Plugins are available for
> both. Are you asking about CN
It was in an announcement to their mailing list. Here's an excerpt:
"The commercial booths have all been filled. Several non-profit groups
have recently been added to the SCALE expo floor: Enlightenment, which
will be showcasing the work going into E17. Enlightenment is rarely
seen at conferen
Where did you see that? It wasn't in Current Events->Upcoming events in
the Wiki. Too bad I just finished several months in California, won't
be going back any time soon (I think) and will miss out on the show in
Feb. Anyone know of any other shows coming up in the US that OpenMoko
will be a
After the modem firmware upgrade from Michael, I was able to connect and
make a phone call with an AT&T SIM card that didn't work before. And a
TMobile SIM card that didn't work at all before would now at least
register on the network and show signal strength, but would not
make/receive a phone
On 1/14/08, Mark Arvidson <[EMAIL PROTECTED]> wrote:
> Hi Tom,
>
> If your usage is for North America, be aware that the Neo as it is offered
> now does not include support for the 850MHz band, so you will only be able
> to use the 1900MHz in these parts.
>
> The battery life is 3-4 hours, and the
I thought I remembered someone said t-mobile sim cards weren't
connecting correctly to the network, but at&t cards were working fine.
GPS is working fine although there was talk about changing the chip &
drivers in the next release - although I'm not sure about the state of
that or the reasons
Hey all,
Just saw that OpenMoko is going to be at the SCALE show this year --
can't wait to drop by and meet some of you guys. Got any good giveaways
planned? ;o)
Ian
___
OpenMoko community mailing list
community@lists.openmoko.org
http://lists.op
Hi Tom,
If your usage is for North America, be aware that the Neo as it is offered
now does not include support for the 850MHz band, so you will only be able
to use the 1900MHz in these parts.
The battery life is 3-4 hours, and the phone is best charged turned on and
plugged into a Linux computer
Shawn Rutledge wrote:
What is your favorite Linux CAD tool for actual 3D work?
I have to agree with the people that say Blender is a high quality
program. For a simple 3D editor I would suggest something like Art of
Illusion (http://en.wikipedia.org/wiki/Art_of_Illusion). In my opinion
th
I also suggest Alibre Express, although it is for Windows and it's not FOSS,
but I was involved in much of the writing of it, so I enjoy seeing it being
used.
Blender would work great for this application, although it's not a
parametric solid modeler. I'll have to give it a spin.
--Mark Arvidson
Hi All,
I've just joined the list, but I've been following openmoko off and on,
at a distance, for several months now, maybe it's been a year or so.
Over time, I've heard of various things that did or didn't work, how
useful/successful the phone is for everyday use, etc. At this point, I
re
Nick Guenther wrote:
On Jan 14, 2008 3:32 AM, Gilles Casse <[EMAIL PROTECTED]> wrote:
XML-based widgets:
http://mobile.yahoo.com/go
I think... I don't understand. How are these XML based? Do you need a
special app to run them or is "XML based" the new word for DHTML/AJAX
(so, need a full webb
Hey Lorn, if you have time could you comment on what else is new or fixed
since your last image was posted?
Thanks a bunch,
Richard
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lorn Potter
Sent: Monday, January 14, 2008 6:40 PM
To: [EMAIL PROTECTED];
Daniel Barkalow wrote:
Anyone have access to useful manufacturing tools? I have friends with CNC
mills and lathes, and one with a water jet cutter. I have indirect access to
3D printers. Anything else interesting out there?
http://www.candyfab.org/
Other phones make their owners angry. Ours
Shawn Rutledge wrote:
On Jan 14, 2008 12:52 PM, Michael Shiloh <[EMAIL PROTECTED]> wrote:
I personally look forward to non-traditional materials. I have an
obsession with concrete, which I'm trying to figure out how to apply in
this situation.
A concrete phone? You can't make it anywhere ne
On Mon, 14 Jan 2008, Michael Shiloh wrote:
> > great, now we can swing into action and get al those alternative cases
> > designed and built
>
> I personally look forward to non-traditional materials. I have an obsession
> with concrete, which I'm trying to figure out how to apply in this situati
左 国坤 wrote:
> Hi, all
>
> I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973 Phase1.
> I need your help to clear some problems.
>
> 1, Incoming call
> ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice versa.
>
> 2, Out Call
> Keeping with 'Dialing' status, NO Cal
Hi, all
I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973 Phase1.
I need your help to clear some problems.
1, Incoming call
ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice versa.
2, Out Call
Keeping with 'Dialing' status, NO Call Tone, No connection to the oth
On Jan 14, 2008 3:32 AM, Gilles Casse <[EMAIL PROTECTED]> wrote:
> XML-based widgets:
> http://mobile.yahoo.com/go
>
I think... I don't understand. How are these XML based? Do you need a
special app to run them or is "XML based" the new word for DHTML/AJAX
(so, need a full webbrowser)?
-Nick
___
Michael Shiloh writes:
>
>Now what would a steampunk phone look like?
I really, really like what might be a called a "restrained steampunk"
style. Something like the existing black/silver case, with a wood
veneer in place of black and brass-bound for the silver.
_
On 15/01/2008, Ben Burdette <[EMAIL PROTECTED]> wrote:
> > great, now we can swing into action and get al those alternative cases
> > designed and built
> >
>
> My company gets aluminum sensor boxes made on a regular basis. They are
> pretty comparable to the neo case in complexity, and I think we
Ben Burdette schrieb:
>
>> great, now we can swing into action and get al those alternative cases
>> designed and built
>>
>
> My company gets aluminum sensor boxes made on a regular basis. They
> are pretty comparable to the neo case in complexity, and I think we
> could get them made for abou
great, now we can swing into action and get al those alternative cases
designed and built
My company gets aluminum sensor boxes made on a regular basis. They are
pretty comparable to the neo case in complexity, and I think we could
get them made for about 200$ each in a batch of 30-40 or
On Jan 14, 2008 12:52 PM, Michael Shiloh <[EMAIL PROTECTED]> wrote:
> I personally look forward to non-traditional materials. I have an
> obsession with concrete, which I'm trying to figure out how to apply in
> this situation.
A concrete phone? You can't make it anywhere near as thin as plastic
Robin Paulson wrote:
On 15/01/2008, Michael Shiloh <[EMAIL PROTECTED]> wrote:
I personally look forward to non-traditional materials. I have an
obsession with concrete, which I'm trying to figure out how to apply in
this situation.
concrete! now there's an idea.
http://wiki.openmoko.org/wik
On 15/01/2008, Michael Shiloh <[EMAIL PROTECTED]> wrote:
> I personally look forward to non-traditional materials. I have an
> obsession with concrete, which I'm trying to figure out how to apply in
> this situation.
concrete! now there's an idea.
http://wiki.openmoko.org/wiki/Steampunk
is one o
Shawn Rutledge wrote:
On Jan 14, 2008 11:14 AM, Jeremiah Flerchinger
<[EMAIL PROTECTED]> wrote:
Yes, you did say they were going to try and make CAD files available.
I'm happy to hear further confirmation back so soon. Hopefully it won't
take too much longer to get the files. DXF files shoul
Yes, LTG is down, but i think it will running again in a few hours. The
photos there are well worth seeing ;)
The video you are found is about the special case from mickey. He have
build it out from a black and white case.
Greets Patrick Beck
Am Montag, den 14.01.2008, 19:26 + schrieb andy
Jeremiah Flerchinger wrote:
Yes, you did say they were going to try and make CAD files available.
I'm happy to hear further confirmation back so soon. Hopefully it won't
take too much longer to get the files. DXF files should also be fine.
I know of several free editors that can import th
yes, dxf is spot on
Thanks for the confirmation.
great, now we can swing into action and get al those alternative cases
designed and built
I personally look forward to non-traditional materials. I have an
obsession with concrete, which I'm trying to figure out how to apply in
this situat
> What is your favorite Linux CAD tool for actual 3D work?
Blender seems to import .dxf files though I've never tried any thing
other than native files.
Get it at www.blender3d.org
___
OpenMoko community mailing list
community@lists.openmoko.org
http://
Tim Niemeyer wrote:
On another Thread was this:
---
And please do get my message right - it is my *hope* that the new firmware will
also improve PM since PM issues of the GSM are know to be caused by the
firmware. There is no confirmation of this potential fix.
Can anybody from Openmoko pleas
> here can you find nice photos from a complete black device.
>
> http://linuxtogo.org/~mickeyl/misc/ <= the DSC* files.
>
> The photos has been shot by mickeyl :)
The site is down at the moment but I did find this at people.openomoko.org
http://people.openmoko.org/mickey/misc/MOV02905.MPG
posted
On Jan 14, 2008 11:14 AM, Jeremiah Flerchinger
<[EMAIL PROTECTED]> wrote:
> Yes, you did say they were going to try and make CAD files available.
> I'm happy to hear further confirmation back so soon. Hopefully it won't
> take too much longer to get the files. DXF files should also be fine.
> I k
On 15/01/2008, Michael Shiloh <[EMAIL PROTECTED]> wrote:
> Can't remember if I told you this or not, but OpenMoko has decided to
> make available the CAD files detailing the NEO case.
fantastic, no i don't recall seeing this confirmed. thanks michael
> I'm pretty sure the format will be .dxf file
Yes, you did say they were going to try and make CAD files available.
I'm happy to hear further confirmation back so soon. Hopefully it won't
take too much longer to get the files. DXF files should also be fine.
I know of several free editors that can import these natively or with a
plugin
Hi Community,
Can't remember if I told you this or not, but OpenMoko has decided to
make available the CAD files detailing the NEO case.
I'm pretty sure the format will be .dxf files. To my limited
understanding of CAD, this seems pretty universal and easy to convert to
the other formats.
Hi,
here can you find nice photos from a complete black device.
http://linuxtogo.org/~mickeyl/misc/ <= the DSC* files.
The photos has been shot by mickeyl :)
Greets
Patrick Beck
Am Sonntag, den 13.01.2008, 15:57 -0800 schrieb Michael Shiloh:
>
> Zeth Green wrote:
> > Warning: Totally frivo
Hallo Nils,
* Nils Faerber <[EMAIL PROTECTED]> [14-01-08 11:36]:
> > i searched on this, but didn't found what i though about...
> > found something else:
> > http://lists.openmoko.org/pipermail/buglog/2007-September/005155.html
>
> Good catch, thanks!
> And there was some explanation in that or
Tim Niemeyer schrieb:
> Hallo Nils,
Hi!
> i searched on this, but didn't found what i though about...
> found something else:
> http://lists.openmoko.org/pipermail/buglog/2007-September/005155.html
Good catch, thanks!
And there was some explanation in that or close thread as well.
Puh, so it was
Hallo Nils,
i searched on this, but didn't found what i though about...
found something else:
http://lists.openmoko.org/pipermail/buglog/2007-September/005155.html
* Nils Faerber <[EMAIL PROTECTED]> [14-01-08 10:23]:
> From: Nils Faerber <[EMAIL PROTECTED]>
> To: List for OpenMoko community disc
Michael Shiloh schrieb:
> Nicolas Linkert wrote:
>> On Thu, 10 Jan 2008 11:41:09 +0100, "Nils Faerber"
>> <[EMAIL PROTECTED]> said:
>>
>>> So buttomline is I would not see it *that* black. Let's hope for the new
>>> modem firmware since the modem is currently the biggest standby current
>>> eater.
XML-based widgets:
http://mobile.yahoo.com/go
Gilles
___
OpenMoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
43 matches
Mail list logo