Re: I/O problems with SD card

2008/11/24 Nikita V. Youshchenko <[EMAIL PROTECTED]>: >>Yes, I know that, but I'm unable to connect to the phone through >> DFU protocol because Neo don't offer itself as a device supporting >> DFU. > > Have you tried to connect usb cable AFTER freerunner started NOR u-boot? I haven't; will

Re: I realy like them

Le dimanche 23 novembre 2008, Dale Maggee a écrit : > drac2000 wrote: > > http://wiki.openmoko.org/wiki/Jokes > > :-p > > Just for the record, these were contributed by various people here: > http://www.mail-archive.com/community@lists.openmoko.org/msg33921.html And everybody is welcome to add to

Re: I/O problems with SD card

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | 2008/11/24 Nikita V. Youshchenko <[EMAIL PROTECTED]>: |>>Yes, I know that, but I'm unable to connect to the phone through |>> DFU protocol because Neo don't offer itself as a device supporting |>> DFU. |

Re: [Debian] apt-get upgrade made the FR die...

Hello arne > am i right in assuming that you > a) are running debian from sd card and > b) have /boot as separate fat partition Looks like I have to go this way. The info on the Debian page to set the 1st partition of the SD to EXT2 and updating uBoot requires some fso-util packages on the local

Re: I/O problems with SD card

Hi, "Evgeny Karyakin" <[EMAIL PROTECTED]> writes: > 2008/11/24 Andy Green <[EMAIL PROTECTED]>: >> I'm not sure what's happening to you, but your dmesg traffic would be >> pretty normal if you were entering and then leaving U-Boot... the >> connection would indeed timeout (-110) when we leave U-Boo

Re: I/O problems with SD card

2008/11/24 Andy Green <[EMAIL PROTECTED]>: > My early problems with DFU disappeared after I took this approach in a > script, it seems it can announce under two different PIDs (this one is > for updating U-Boot): > > #!/bin/bash > dfu-util -a 1 -d 0x1d50:0x5119 -D u-boot.udfu > if [ $? -eq 1 ] ; th

Re: I/O problems with SD card

2008/11/24 Paul Fertser <[EMAIL PROTECTED]>: > It might be a silly suggestion but please double-check the usb cable > used, try to connect directly to the motherboard (avoid front-panel > connectors and usb hubs). May be you should try another PC. > > By no means (as you have no dboard) you could h

Re: I/O problems with SD card

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | 2008/11/24 Andy Green <[EMAIL PROTECTED]>: |> My early problems with DFU disappeared after I took this approach in a |> script, it seems it can announce under two different PIDs (this one is |> for updating

Re: [FSO] First steps

Hi All, >> Addressbook : Is there a way to import a former qtopia sqlite file ? I >> read some discussions inconclusive about it, is there some advances ? >> > > I don't have anything for you on these. > Well I got a little impatient and did a quick and dirty patch for zhone to read the contacts

Re: [FSO] First steps

i checked again and it works (you get both sim and address book contacts but you can only add/edit/delete sim contacts). uncomment the line that says combined = res + result. On Mon, Nov 24, 2008 at 3:15 PM, Carl Lobo <[EMAIL PROTECTED]> wrote: > Hi All, > >>> Addressbook : Is there a way to impor

Zhone doesn't show my contacts and messages after restart

Hi, I understand that Zhone is not a fully functional phone application and it is not supposed to be. But i think that fixing this bug is not too hard for those who know framework and python well :) I think i know what happens. If i restart Zhone without restarting frameworkd it never receives Re

Re: Freerunner's GSM Calypso Modem Firmware Upgrade...

Just tried this a dozen times. It always hangs at "Bootloader: (reset target)" I log into the second termial as stated, issue "s3c24xx-gpio b7=1" and wait ...wait ...wait ... Used the reccomended rootfs etc. Gone back to 2008.9 and see if gsm is still there ... it is! BillK On Tue, 2008-1

Problems with making local repository

Hello! I use OE environment and I would like to use ipk files it produces to install on my FR using opkg. My problem is that OE doesn't include all of the compiled packages to Packages,gz. So after reading some ipkg instructions I run: ipkg-make-index dir_with_ipks But it gives me errot like: tar:

Re: Problems with making local repository

I found the solution - you just have to change line nr. 155 in file ipkg.py from ipkg-utils to: control = os.popen("ar p "+fn+" control.tar.gz | tar xfzO - --wildcards '*control'","r") I think it was a problem with tar version - ipkg-utils are from year 2005. Leonti __

Re: [Debian -FSO -GPS] No Fix

I'm using FSO 4.1 , and have a similar problem. Enabling debug on framework gives messages that suggest it is sending NMEA data when frameworkd is expexting UBX data. There's a curious message in the logs - 'exception 0x8040 was trapped' .The GPS clearly has power. Here's some of the log:

Re: Zhone doesn't show my contacts and messages after restart

Am Monday 24 November 2008 13:33:54 schrieb Paul Fertser: > Hi, > > I understand that Zhone is not a fully functional phone application > and it is not supposed to be. But i think that fixing this bug is not > too hard for those who know framework and python well :) [...] I noticed the same proble

Re: Zhone doesn't show my contacts and messages after restart

>> I understand that Zhone is not a fully functional phone application >> and it is not supposed to be. But i think that fixing this bug is not >> too hard for those who know framework and python well :) > [...] > > I noticed the same problem. i noticed that zhone now does not know about auth any

Re: [debian] state of enlightment and illume packaging

On Mon, Nov 24, 2008 at 3:25 AM, The Rasterman Carsten Haitzler < [EMAIL PROTECTED]> wrote: > On Sun, 23 Nov 2008 21:38:05 + "Neil Jerram" < > [EMAIL PROTECTED]> > babbled: > > > 2008/11/23 Bernd Prünster <[EMAIL PROTECTED]>: > > > > > > do you really care about segv ? this si not a debian iss

Re: Fast screen rotate app

Moritz Bitsch wrote: > Hi, > > I've built a small binary package. It can be get from here: > https://turmspitze.org/files/rotate_0.0.1_armv4t.ipk > > A Source package can be get from here: > https://turmspitze.org/files/rotate-0.0.1.tar.gz I have just installed your package. The prefix /usr/ is

Re: [debian] state of enlightment and illume packaging

mallikarjun arjun wrote: > > > On Mon, Nov 24, 2008 at 3:25 AM, The Rasterman Carsten Haitzler > <[EMAIL PROTECTED] > wrote: > > > > Hello guys, can any one of u tell me how to install e17 on debian??? > because i did not find any package when i typed apt-get instal

Re: Fast screen rotate app

Tilman Baumann ha scritto: > Moritz Bitsch wrote: hi i have made a similar application, can you test on SHR for me? :) you can download from http://minucci.net/file/opkg/ruotami_0.2_all.opk thank you see you ___ Openmoko community mailing list commun

Re: [debian] state of enlightment and illume packaging

yes you can, you just need to read the top of this discussion... there is a deb provided from some private repos d On 11/24/08, mallikarjun arjun <[EMAIL PROTECTED]> wrote: > > > > On Mon, Nov 24, 2008 at 3:25 AM, The Rasterman Carsten Haitzler < > [EMAIL PROTECTED]> wrote: > >> On Sun, 23 Nov 2008

Re: Is there any kind of network manager?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Joel Newkirk wrote: > On Sat, 22 Nov 2008 02:58:48 +0100, "Marco Trevisan (Treviño)" > <[EMAIL PROTECTED]> wrote: >> Alastair Johnson wrote: >>> Or you could follow >>> Joel Newkirk's simple lightweight configuration described at >>> http://jthinks

Re: Fast screen rotate app

Carlo Minucci wrote: > Tilman Baumann ha scritto: >> Moritz Bitsch wrote: > > > hi > i have made a similar application, can you test on SHR for me? :) > you can download from http://minucci.net/file/opkg/ruotami_0.2_all.opk > > thank you Sure. But I like to point out that I'm rather biased towa

Problem installing mokoko and pidgin

Hello guys, I am using om-2008.9. When i try installing some packages it gives these errors. opkg install mokoko. Configuring libid3tag0 Collected errors: * Warning: remove /usr/lib/libcurl.so.4.0.1 failed: No such file or directory * Warning: remove /usr/lib/libcurl.so.4.0.1 failed:

Re: [debian] state of enlightment and illume packaging

On Mon, Nov 24, 2008 at 9:21 PM, Tilman Baumann <[EMAIL PROTECTED]> wrote: > mallikarjun arjun wrote: > > > > > > On Mon, Nov 24, 2008 at 3:25 AM, The Rasterman Carsten Haitzler > > <[EMAIL PROTECTED] > wrote: > > > > > > > > > Hello guys, can any one of u tell me how to

[GENTOO] updates?

Hi! Are there some news about gentoo for freerunner? It would be nice if mantainers would produce a ready to go "stage4" tarball for fast and simple deploying. Nicola ___ Openmoko community mailing list community@lists.openmoko.org http://lists.open

Re: Fast screen rotate app

Hi, thanks for testing. I've fixed the build script and the desktop file. All files are now with PREFIX=/usr. I also fixed the stupid dependency error. A updated ipkg and tgz can be get from here: https://turmspitze.org/files/ On Mon, 24 Nov 2008 16:47:26 +0100 Tilman Baumann <[EMAIL PROTECTED

Where can I get the last reasonably stable SHR-Version?

Hi! I've tried SHR just after the last milestone-release and it worked quite well. At least a lot better than the most recent version I pulled yesterday where I have no GPS anymore and the power-management ignores tapping on the screen, so that NEO falls asleep while I'm typing... This version

Re: Where can I get the last reasonably stable SHR-Version?

Where did you find any milestone-release? http://shr.bearstech.com/trac/ clear says: SHR has not been released yet. There are only preview images so far. Leonti ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/m

Re: Zhone doesn't show my contacts and messages after restart

Am Monday 24 November 2008 13:33:54 schrieb Paul Fertser: > I think i know what happens. If i restart Zhone without restarting > frameworkd it never receives ReadyStatus signal from > org.freesmartphone.GSM.SIM because sim was ready long ago it > started. This should no longer be a problem as nowa

us network and Uuntu 8.10 - is there a better way?

Hello, I recently upgraded my laptop to Xubuntu 8.10, and now I run into the issues described in USB Networking[1] on the wiki: - editing /etc/network/interfaces doesn't work - Network Manager setup (with /etc/udev/rules.d/80-freerunner.rules and /usr/local/sbin/freerunner-usb-add.sh) doesn't work

Re: Freerunner's GSM Calypso Modem Firmware Upgrade...

FYI - the upgrade worked as described in the wiki, on mye Neo Frerunner. Good job! (No, I don't know if I was the victim of any GSM bugs). -- Regards, Torfinn Ingolfsen ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmo

Re: us network and Uuntu 8.10 - is there a better way?

Am Montag 24 November 2008 schrieb Torfinn Ingolfsen: > Hello, > > I recently upgraded my laptop to Xubuntu 8.10, and now I run into the > issues described in USB Networking[1] on the wiki: > - editing /etc/network/interfaces doesn't work > - Network Manager setup (with /etc/udev/rules.d/80-freerun

Re: Zhone doesn't show my contacts and messages after restart

Hi, "Michael 'Mickey' Lauer" <[EMAIL PROTECTED]> writes: > Am Monday 24 November 2008 13:33:54 schrieb Paul Fertser: >> I think i know what happens. If i restart Zhone without restarting >> frameworkd it never receives ReadyStatus signal from >> org.freesmartphone.GSM.SIM because sim was ready lon

Re: us network and Uuntu 8.10 - is there a better way?

Hello, On Mon, Nov 24, 2008 at 9:07 PM, Joerg Lippmann <[EMAIL PROTECTED]> wrote: I have 'auto usb0' first, then the rest of the lines are the same as yours > iface usb0 inet static > address 192.168.0.200 > netmask 255.255.255.0 > network 192.168.0.0 > up iptables -A POSTROUTING -t nat -j MASQU

[debian] how to avoid wsod?

up until recently I never ever experienced White Screen Of Death(wsod) on my debain openmoko. Suddenly I get it all the time with Debian, probably after recent upgrades. I've read that wsod happens after suspend. How do I completely disable suspend in debian? -- Joakim Verona ___

Re: Problem installing mokoko and pidgin

mallikarjun arjun wrote: > Hello guys, > > I am using om-2008.9. When i try installing some packages it gives these > errors. > > opkg install mokoko. > > Configuring libid3tag0 > Collected errors: > * Warning: remove /usr/lib/libcurl.so.4.0.1 failed: No such file or > directory > * W

Re: I/O problems with SD card

>>Yes, I know that, but I'm unable to connect to the phone through >> DFU protocol because Neo don't offer itself as a device supporting >> DFU. > > Have you tried to connect usb cable AFTER freerunner started NOR u-boot? ... > My early problems with DFU disappeared after I took this approach

[OT]Software patents end? ??:) light at the end of tunnel

Dear all, Is a little bit offtopic but due recent mp2/mp3 fight against pirat... sorry Sysvel, maybe is interesting to spread this little bit of hope to the Openmoko community Trough a local FOSS-friendly news site[1] I read there is a 180 degrees in Software pattent policy in US pattent office , i

Re: us network and Uuntu 8.10 - is there a better way?

Can you contribute the result to http://wiki.openmoko.org/wiki/USB_Networking under a Ubuntu 8.10 header? Torfinn Ingolfsen wrote: > Hello, > > On Mon, Nov 24, 2008 at 9:07 PM, Joerg Lippmann <[EMAIL PROTECTED]> wrote: > > I have 'auto usb0' first, then the rest of the lines are the same as your

Re: [FSO] First steps

On Sunday 23 November 2008, Joel Newkirk wrote: > On Sat, 22 Nov 2008 11:44:49 +, Al Johnson > > <[EMAIL PROTECTED]> wrote: > > On Saturday 22 November 2008, julien cubizolles wrote: --snip-- > >> It can wait. Just out of curiosity, is there some work being done on > >> this front ? > > > > A P

Re: Problems with making local repository

On Monday 24 November 2008, Leonti Bielski wrote: > Hello! > I use OE environment and I would like to use ipk files it produces to > install on my FR using opkg. > My problem is that OE doesn't include all of the compiled packages to > Packages,gz. > So after reading some ipkg instructions I run: >

Re: Freerunner's GSM Calypso Modem Firmware Upgrade...

ok, replying to myself as it may help others: First off, when I eventually got 2008.9 registered, an SMS that was sent some hours before came in (that perennial 2008.x problem :( I surmise that this was the reason I couldnt get it to flash (e.g., SMS waiting) Next I shut down X on 2008.9 and was

Re: [debian] how to avoid wsod?

[EMAIL PROTECTED] writes: > Suddenly I get it all the time with Debian, probably after recent > upgrades. Can you please downgrade? It would be imporant to figure out which upgrade did this. ___ Openmoko community mailing list community@lists.openmoko.o

Re: us network and Uuntu 8.10 - is there a better way?

Also be aware that the Network Manager in Ubuntu Intrepid is currently buggy. If you have it running, it is prone to do friendly things like automatically add the static IP and route for eth0 to usb0 when it comes up. Either it controls all interfaces, or it's not running, right now it refuses to

Re: Problem installing mokoko and pidgin

On Tue, Nov 25, 2008 at 2:24 AM, ivvmm <[EMAIL PROTECTED]> wrote: > mallikarjun arjun wrote: > > Hello guys, > > > > I am using om-2008.9. When i try installing some packages it gives these > > errors. > > > > opkg install mokoko. > > > > Configuring libid3tag0 > > Collected errors: > > * Wa

help~After using the MokoMakefile to build the qemu, the qemu-neo1973 restart at once when it boot the kernel

the image i used are "testing-om-gta01-20081124.uImage.bin", "testing-om-gta01-20081124.rootfs.jffs2" "gta01bv4-u-boot.bin". I followed the Wiki.openmoko.org, firstly installed required software, then download the mokomakefile, "make qemu","make run-qe

Re: Freerunner's GSM Calypso Modem Firmware Upgrade...

Seemingly no luck here. T-Mobile SIM, I suppose 3G. Still says sim missing. -ls ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community

Re: Freerunner's GSM Calypso Modem Firmware Upgrade...

Please could you switch to original thread on [devel]-ML. /j Am Di 25. November 2008 schrieb Lally Singh: > Seemingly no luck here. > > T-Mobile SIM, I suppose 3G. > > Still says sim missing. > > -ls > > ___ > Openmoko community mailing list > commu

Re: Re: I/O problems with SD card

On Nov 23, 2008 8:12pm, Andy Green <[EMAIL PROTECTED]> wrote: Recent kernels have a workaround in that starts the card at slower clock until the first bulk transfer completed successfully when it is cranked up to 16MHz, that seemed to make the previous problems with some cards pretty much go away

PLEASE DON'T ANSWER THIS THREAD - Re: Freerunner's GSM Calypso Modem Firmware Upgrade...

May I request everybody answering to this topic please switch to the original thread on [devel]-mailinglist[1], so we can keep all the stuff ongoing regarding success / problems with flashing GSM-FW at one place. Many thanks for kindly regarding this. cheers jOERG Am Mi 19. November 2008 sch

Re: us network and Uuntu 8.10 - is there a better way?

On Monday 24 November 2008 20:19:55 Torfinn Ingolfsen wrote: > Hello, > > I recently upgraded my laptop to Xubuntu 8.10, and now I run into the > issues described in USB Networking[1] on the wiki: ... same here > Manual setup still works, but it is cumbersome. > Is there a better way? It's possibl

Re: help~After using the MokoMakefile to build the qemu, the qemu-neo1973 restart at once when it boot the kernel

I'm having the same problem, also with ubuntu 8.04. Saludoss On Tue, Nov 25, 2008 at 3:59 AM, lostdays <[EMAIL PROTECTED]> wrote: > > the image i used are "testing-om-gta01-20081124.uImage.bin", > "testing-om-gta01-20081124.rootfs.jffs2" &