Paul Smith [EMAIL PROTECTED] writes:
Why is there not an ISO of the latest code dated June 7? I already
downloaded the May 5th dated ISO and burned it for many friends, only to
find out it is not the final version? Is there anywhere with an ISO of the
latest version?
it will updated today,
Ivan Kerekes wrote:
On Thursday 07 June 2001 11:00, you wrote:
I did all this.
After I try to restart xfs once I got a bus error, core dumped messages, most
of the time xfs just won't start, and I got the Authentication failure
messages. Even if I replace the unix/:-1 with the explicit
Hi,
I wonder if anybody has an idea how to create a bootdisk for a diskless
workstation
with the kernel shipped with Cooker (or Mandrake-8.0).
The bootdisk should do the following (as I do not want to create a
special kernel!):
- load standard-kernel with:
- load initial ramdisk
- probe the NIC
I know that it's stupid to ask when we will see 8.1, but I'm curious to
know the main goal for next release. I mean: kde-2.2, latest Gnome and
kernel and so on, but where will the attenction be placed mainly?
Many thanks and sorry if it's a stupid question ;o)
Claudio
Since I presume Mdk 8.1 should be out a bit before
GNOME 2, would the latest GNOME 2 beta out at that
time be included - oh ok, that is probably pushing it
a bit, at least made available for download like the
current KDE alphas :)
Michel
--- Claudio [EMAIL PROTECTED] wrote: I know
that it's
On Friday 08 June 2001 11:52, Guillaume Cottenceau wrote:
Claudio [EMAIL PROTECTED] writes:
I know that it's stupid to ask when we will see 8.1, but I'm curious to
know the main goal for next release. I mean: kde-2.2, latest Gnome and
kernel and so on, but where will the attenction be
Is there a way to specify mount options for partitions that are *created*
during installation (i.e. those specified in the 'partitions' section
rather than those specified in the 'manualFstab' section)? I have not
been able to trace it all the way through the installer code to find out a
Michael Brown [EMAIL PROTECTED] writes:
Is there a way to specify mount options for partitions that are *created*
during installation (i.e. those specified in the 'partitions' section
rather than those specified in the 'manualFstab' section)? I have not
been able to trace it all the way
On Fri, 8 Jun 2001, [iso-8859-1] Jürgen Zimmermann wrote:
Hi,
I wonder if anybody has an idea how to create a bootdisk for a diskless
workstation
with the kernel shipped with Cooker (or Mandrake-8.0).
The bootdisk should do the following (as I do not want to create a
special kernel!):
On Fri, 8 Jun 2001, Pixel wrote:
i don't think there's any way to achieve what you want
OK, I'll use perl -pi on /etc/fstab in the postInstall instead.
'partitions' = [
{
'mntpoint' = '/',
'size' =
Chmouel Boudjnah wrote:
--=-=-=
Name: e2fsprogsRelocations: (not relocateable)
Version : 1.20 Vendor: MandrakeSoft
Release : 1mdk Build Date: Fri Jun 8 18:07:42 2001
Install date: (not installed)
Op 08 Jun 2001 15:50:17 -0100, Claudio schreef:
On Friday 08 June 2001 11:52, Guillaume Cottenceau wrote:
Claudio [EMAIL PROTECTED] writes:
I know that it's stupid to ask when we will see 8.1, but I'm curious to
know the main goal for next release. I mean: kde-2.2, latest Gnome and
Claudio [EMAIL PROTECTED] writes:
On Friday 08 June 2001 11:52, Guillaume Cottenceau wrote:
Claudio [EMAIL PROTECTED] writes:
I know that it's stupid to ask when we will see 8.1, but I'm curious to
know the main goal for next release. I mean: kde-2.2, latest Gnome and
kernel and so
andre [EMAIL PROTECTED] writes:
I think Claudio want to ask what will change like the move to /usr/share
in 7.2 and gcc2.96 in 8.0
we will not have big ADI changes like that in 8.1..
--- Blue Lizard [EMAIL PROTECTED] wrote:
Since probably mdk's most famous 'plus' is
installing and configuring
ease of use, what new install features will we be
seeing? If tv tuner
card (or radio for that matter) is detected, will it
be set up for that?
I think Mandrake already does
hey guys is there anything like rsync for windows? there's only one
computer here attached to the DSL line and it's a laptop and I haven't yet
been able to get it working in Linux with the DSL connection, so my only
alternative is to use windows. Got most of the cooker files but it changes
Hi,
I have installed the mozilla 0.9.1 packages, and also nautilus, that
was rebuilt very soon.
Galeon broke, so I tried to use nautilus (I really HATE the interface
of real mozilla...). Nautilus connects to a site, gets the http code
but renders anything.
Well, I downloaded galeon-src.rpm,
On Fri, Jun 08, 2001 at 10:31:38AM -0700, pablito wrote:
hey guys is there anything like rsync for windows?
The cygwin utilities (www.cygwin.com) are excellent... all the standard
GNU stuff ported to windows. (Even an ssh client!) rsync isn't in there,
but you might be able to build it from
On 06.08 J . A . Magallon wrote:
Galeon broke, so I tried to use nautilus (I really HATE the interface
of real mozilla...). Nautilus connects to a site, gets the http code
but renders anything.
This perhaps is solved, galeon 0.11 is out.
--
J.A. Magallon #
Andrej Borsenkow [EMAIL PROTECTED] writes:
Chmouel Boudjnah wrote:
Andrej Borsenkow [EMAIL PROTECTED] writes:
O.K., I have found why it happens. Here goes.
ok fixed in latest util-linux of cooker..
No, sorry. It now tries to open /dev/tty but in wrong place - in
Hello,
Could some nice person tell me which package contains libsensors.so.0
Thanks,
Owen
OS [EMAIL PROTECTED] writes:
Hello,
Could some nice person tell me which package contains libsensors.so.0
urpmf(chmou@giants)[~]-% urpmf libsensors
lm_utils:/usr/lib/libsensors.so
lm_utils:/usr/lib/libsensors.so.1
lm_utils:/usr/lib/libsensors.so.1.1.1
lm_utils-devel:/usr/lib/libsensors.a
On Thu, 7 Jun 2001, OS wrote:
Could some nice person tell me which package contains libsensors.so.0
$ urpmf libsensors.so
lm_utils:/usr/lib/libsensors.so
lm_utils:/usr/lib/libsensors.so.1
lm_utils:/usr/lib/libsensors.so.1.1.1
Hello,
Since the mirrors have started putting everything at Thursday 5th it makes it
a trifle difficult to ascertain which are the latest packages !!! Following
advice I upgraded lm_utils from -1mdk to -3mdk and lo' there was libsensors
Thanks,
Owen
So sprach OS am Thu, Jun 07, 2001 at 09:15:28PM +0100:
a trifle difficult to ascertain which are the latest packages !!! Following
Uhm, subscribe to the changelog mailinglist if you always want to know about
the latest cooker packages.
Alexander Skwar
--
How to quote:
Should be available soon from sourceforge.net/projects/rox too, for a
description of ROX check rox.sourceforge.net.
The fastest file manager on X :)
Michel
-
Name: rox-base Relocations: (not relocateable)
Version
1) mkcds references .../lib/perl5/5.6.0 instead of 5.6.1
2) Fixing that results in /lib/ld-linux.so.2: version `GLIBC_2.2.3' not
found (required by ...Mandrake/mdkinst/lib/libc.so.6)
This is running on a Cooker version from about 2 months ago. I was able to
build cds about 2 weeks ago, but that
On Fri, 8 Jun 2001, [iso-8859-1] Michèl Alexandre Salim wrote:
Since I presume Mdk 8.1 should be out a bit before
GNOME 2, would the latest GNOME 2 beta out at that
No!!! Please ;-)
Beta versions in dist make whole dist unstable.
time be included - oh ok, that is probably pushing it
a bit,
On 8 Jun 2001, Guillaume Cottenceau wrote:
Main goals for releases are mostly package updates and internal
developments.
Package updates, that's very simple: we have no control.
Just try not to include unstable versions in 8.1 but in Cooker
Internal developments are not yet finished to
Sinve I upgraded to the new XFree, I cannot run Xinerama mode. X Runs
fine without it, but when I enable it I get this:
--
Fatal server error:
Caught signal 11. Server aborting
XIO: fatal IO error 104 (Connection reset by peer) on X server :0.0
after 0 requests (0 known
Hi
VERSION (rsync ftp.sunet.se)
Linux-Mandrake Cooker-i586 20010608 20:31
At the same stage in install as the last five times I get the 'Error
-prerequisite chain c'.
When I am sent back to 'choosing packages to install' I opt for half the
earlier amount of MB but the 'new
Ok, narrowed the problem down. If I comment out:
Load extmod
then Xinerama works fine. problem is, that then I can't run
enlightment, because enlightement requires extmod.
Any ideas?
-Bryan
Bryan Opfer wrote:
Sinve I upgraded to the new XFree, I cannot run Xinerama mode. X Runs
Todd Richmond [EMAIL PROTECTED] writes:
1) mkcds references .../lib/perl5/5.6.0 instead of 5.6.1
2) Fixing that results in /lib/ld-linux.so.2: version `GLIBC_2.2.3' not
found (required by ...Mandrake/mdkinst/lib/libc.so.6)
This is running on a Cooker version from about 2 months ago. I was
On Friday 08 June 2001 09:21, you wrote:
[...]
i've just send a new version to our webmaster. In the meantime use
Version 0.22?
http://perso.mandrakesoft.com/~prigaux/auto_inst.html written by
[EMAIL PROTECTED] based on my previous doc.
comments are welcome. (i've not finished commenting
On Friday 08 June 2001 02:14, you wrote:
Hi,
i do have any idea why xfs starts from times to times only in your
case.
Have you tried to remove your ~/.Xauthority that could be the origin of
the authentification problem ?
What do you get by dooing telinit 3 and then startx ?
I think you
On Fri, 8 Jun 2001, Bryan Opfer wrote:
Ok, narrowed the problem down. If I comment out:
Load extmod
then Xinerama works fine. problem is, that then I can't run
enlightment, because enlightement requires extmod.
Any ideas?
Extmod is a wrapper for a number of extensions, so
I am trying to create a LINUX RAID system using two 9GB SCSI drives on and
adaptec motherboard(tyan thunderbolt) controller. The setup is:
100MB ext2 /boot on disk0
200MB swap on disk1
4000MB RAID on each drive combined to 8000MB md0 Reiserfs /
4500MB RAID on each drive combined to 9000MB md1
Anybody here reads newsgroups (alt.os.linux.mandrake)?
It is reported that the latest security updates break system sound. People
pinpointed it to aRts (and libarts) - and say that rebuilding from source
RPM helps.
I guess, it does not make good impression; anybody cares to fix it?
-andrej
David Eastcott [EMAIL PROTECTED] writes:
On Friday 08 June 2001 09:21, you wrote:
[...]
i've just send a new version to our webmaster. In the meantime use
Version 0.22?
oops, new version uploaded.
guran [EMAIL PROTECTED] writes:
During halfway through in install I got the 'prerequisite chain Error'
should be fixed soon by a new depslist.ordered
Sarang Lakare a écrit :
I had lots of problems with LM8.0's memory detection. I have 1.5GB system
which was working perfect with LM7.2. The default installation of LM8.0
detected only 900MB. Later I found out thru the expert list that the kernel
is configured to use 1GB only. So I tried
On Friday 08 June 2001 00:20, you wrote:
On Fri, 8 Jun 2001, Arnd Bergmann wrote:
do /incoming and to http://users.evitech.fi/arndb/cooker/ .
Sorry for having to update this, I meant
http://users.evitech.fi/~arndb/cooker/
Thanx for the response. With the XFree kernel modules it works
List,
When I try to upgrade my MAndrake 8 from XFree 3.3.6 - XFree 4.0.2 when I do
a startx, it still tries to load XFree 3.3.6.
Do I need to remove the RPM's of XFree 3.3.6 or what. Thanks.
--
_
Thanks.
Jason Corcoran.
email : [EMAIL PROTECTED]
sms : [EMAIL PROTECTED]
Hi
VERSION (rsync ftp.sunet.se)
Linux-Mandrake Cooker-i586 20010608 12:16
OBS!ASUS P3V4X with VIA APOLLO PRO133A Chipset
During halfway through in install I got the 'prerequisite chain Error'
Ctrl-Alt-F3 -
(the last packages successfully installed are)
libxml
XFree86-xfs
Claudio [EMAIL PROTECTED] writes:
I know that it's stupid to ask when we will see 8.1, but I'm curious to
know the main goal for next release. I mean: kde-2.2, latest Gnome and
kernel and so on, but where will the attenction be placed mainly?
Many thanks and sorry if it's a stupid question
Jason Corcoran [EMAIL PROTECTED] writes:
List,
When I try to upgrade my MAndrake 8 from XFree 3.3.6 - XFree 4.0.2 when I do
a startx, it still tries to load XFree 3.3.6.
Do I need to remove the RPM's of XFree 3.3.6 or what. Thanks.
Reconfigure X with XFdrake, or manually change the
Claudio wrote:
Since last sane (that one included with 8.0) does NOT work with mustek and HP
scanners, is it possible to have a 1.0.5-pre for testing?
Thanks, C.
Ich glaube, es fixed a prob with HPOJPRO1150C.
Jürgen Zimmermann [EMAIL PROTECTED] writes:
Hi,
I wonder if anybody has an idea how to create a bootdisk for a diskless
workstation
with the kernel shipped with Cooker (or Mandrake-8.0).
The bootdisk should do the following (as I do not want to create a
special kernel!):
- load
Since last sane (that one included with 8.0) does NOT work with mustek and HP
scanners, is it possible to have a 1.0.5-pre for testing?
Thanks, C.
--
Claudio Panichi
SysAdmin at Dept. of Physics
Tor Vergata University and INFN - Rome
Remote System is: LINUX!
On Fri, 8 Jun 2001, Marc Audard wrote:
I am trying to compile a huge software for my work, and it
definitely does not work with gcc-2.96;
What does not work ? Does the compiler crash ? Does it report too many
errors from your code ? Please be more specific.
Unfortunately too, with the gcc
Vincent Meyer [EMAIL PROTECTED] writes:
Does anyone know why ATT @home doesn't like the DHCP client in
the installer? I can hard set the ip and stuff, and that works
like 95% of the time, however, always says that there is no response
from DHCP server.
Did that work before? When did it
# rpm -U kdevelop-2.2-0.alpha2.3mdk.i586.rpm
file /usr/share/mimelnk/application/x-designer.desktop from install of
kdevelop-2.2-0.alpha2.3mdk conflicts with file from package
kdelibs-2.2-0.alpha2.3mdk
file /usr/share/mimelnk/application/x-linguist.desktop from install of
On Friday 08 June 2001 16:24, Guillaume Cottenceau wrote:
Claudio [EMAIL PROTECTED] writes:
On Friday 08 June 2001 11:52, Guillaume Cottenceau wrote:
Claudio [EMAIL PROTECTED] writes:
I know that it's stupid to ask when we will see 8.1, but I'm
curious to know the main goal for next
Blue Lizard [EMAIL PROTECTED] writes:
should i be waiting for a lib package to go with this?
the lib should be updated...
54 matches
Mail list logo