Hi,
I use passwordless login in kdm for a couple accounts on my system. This
used to work great in KDE 3.1.4 but it has stopped working in KDE 3.2 beta.
Getting a fresh config file and making my customizations over that didn't
cure it. I'm not sure if this is a packaging issue, something tha
I've had a problem with printing from KDE on my Cooker machine for a while
now, but finally decided to inquire about it when I noticed I was still
having it in 3.1.93: when I print from an application like KMail, KWrite or
KOffice, everything is fine except that the spacing between letters is m
rom people
who are missing it.
-Andy
previews are
turned on) the gear icon just spins for a while (roughly 1 sec for each such
file) without any thumbnail file being created. The problem still occurs if
I create a new user, so I don't think it has to do with a config file.
Anyone else seeing this?
Andy Neitzke
[EMAIL PROTECTED]
-- I suppose I am missing something simple?
-Andy
you
already sent,
-Andy
Hi,
I'm having a problem with the current PyQt package in contrib. After I
install it (together with its dependencies sip and libsip9)
it doesn't quite work -- says it can't find libsip:
[andy@teleology quasinormal]$ python
Python 2.2.2 (#2, Jan 4 2003, 14:19:43)
[GCC 3.2.1 (Man
Hiwhen trying to configure eth1 (a wireless lan pcmcia card) using
the wizard in Mandrake Control center, when i finish entering details
such as WEP encryption key and such and proceed to finish the config
process, the wizard hangs and will not complete without me ejecting
pcmcia card in whi
>
> It is quite hard to find a windows developer here arround...
>
Probably not the best place to mention it, but I'm a windows programmer
;) (Delphi)
Working on switching to Linux tho (which *is* why I'm here!) :) (Kylix).
Anything I can do, just shout.
Andy
ile from the installer?
Andy
> > > > 2. Xfdrake scrambled the XF86Config-4 - it missed the
> Screen section
> > > > out.
> > >
> > > did you used Cancel once during X configuration? ie. did
> you get the
> > > menu proposing "Card", "Monitor", ... ??
> >
> > The wizard completed perfectly normally, said it was complete.
plete, that's when I went snooping.
It would be nice of XFDrak made a backup of the 'old' file before it
overwritten it.
Andy
- it missed the Screen section
out.
3. Linuxconf - restarting the network config, it is getting the wrong
command - appears to be a { appearing before the commaned (e.g {start
instead of start).
Andy
Possible solution:
http://islay.dyndns.org/taz/index.html
t any newer build of *any* linux I have tried
will not even start to install.
Is this chipset not supported in the current kernels or has something been
missed by accident??
Found a couple of others having the same trouble installed Mdk 8.2 on this
chipset too in the newsgroups.
Help! :)
Andy
.
Either way, Mdk 8.1 enumerates the PCI devices perfectly happily, but
8.2 and cooker don't.
Andy
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of Adam Williamson
> Sent: 11 August 2002 22:21
> To: [EMAIL PROTECTED]
> Subje
> "Andy Neillans" <[EMAIL PROTECTED]> writes:
First, thanks for replying :)
> > CD-ROM Install freezes on Hard Disk Drive setup step.
>
> - can you test booting with "linux noauto" ?
Installer gets further, cancelled it to get a new set of images.
(Ha
Previously attached file was truncated.
Andy
[root@shuttle proc]# cat pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 1039:0740 (Silicon Integrated Systems [SiS]) (rev 1)
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xe800
network.img, ftp install.
> >
>
> Problem still occurs with Aug 9 build.
>
> Can anyone give me any pointers too look for? Any extra information I
> can provide??
>
More info.
Problem appears to be Cooker doesn't recognise or load the PCI bus at
all.
Attached is a cat /proc/pci on a Mdk 8.1 build running on the machine.
Andy
[root@shuttle proc]# cat pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 1039:0740 (Silicon Integrated Systems [SiS]) (rev 1)
CD-ROM Install freezes on Hard Disk Drive setup step.
bug report attached.
Andy
report.bug
Description: Binary data
: System does not support PCI.
>
> This is interesting, as although the network card is integrated, AFAIK
> it is on the PCI bus :)
>
> Using Cooker build Aug 7 2002 01:56:53, network.img, ftp install.
>
Problem still occurs with Aug 9 build.
Can anyone give me any pointers too look for? Any extra information I
can provide??
Andy
...well that message is dated 16th March..hopefully being August 4th
might help matters...i am about to run up 9.0beta2
on my system...maybe it's been fixedi sure hope so..how long
haqs the hpt372/374 been out? a year and a half??...i'm basically
floored that th
...a 372 is not a 370, and regardless of what a 370's compatibility is
with mandrake the 372 has it's own issue apparently..it appears
9.0b1 will do so far what 8.2 wouldn't, and that is detect drives on
hpt372 w/o kernel-panic.but, it's not allowing setting up partitions
because it's not
hat is preventing writing to
drives on hpt372 controller.
Note, i am not attempting to use raid functions, i just want to use
these two extra drive connectors found on the hpt372 as normal
independent hdd's.
So, what is the status of hpt 372/374 support in 9.0, is it being
addressed??
Thx for any help.
Andy.
Webmin still says Mandrake 8.2 along the top.
Andy
allation with a 3com 509 without
> problems.
Strange :(
Local mirrored from sunsite.uio.no, just checked its all up to date, and
still no go.
Can you guys give some information on what sort of network / system
config that you are hooked up to?
(e.g DNS / DHCP / etc)
Andy
which mirror / site
did you use to get the cooker build from?
Andy
ttle root]#
VMWare session: Mdk 8.2
[root@laptopxp-linux root]# lspcidrake -v
[snip]
Pcnet32 : Advanced Micro Devices [AMD]|79c970 [Pcnet LANCE]
[NETWORK_ETHERNET} (vendor:1022 device:2000)
[snip]
[root@laptopxp-linux root]#
Download VMWare 3.1.1 - should do it. :)
Andy
XP and Linux clients
- Failed on a Realtek RT8139
- Failed in a VMWare session
- Tried both AMD and Intel CPU's
Failed when trying all three Network install options, aswell as failing
on CD-ROM install (see other mail thread).
Andy
at 0x10a0, 00 50 56 59 3c 7a assigned
IRQ 10
<6>eth0: registered as Pcnet/PCI II 79C970A
<6>pcnet32: 1 cards_found
And thatÂ’s it.
I have tried two DNS / DHCP Servers - VMWare internal and whats running
on my Mdk 8.2 server.
I have also tried specifying a static IP.
Andy
cdrom drive :-). Any interesting message on
> > console #4?
> >
I see the correct initialisation and scanning of the SCSI controller, a
few lines about usbdevfs and a usb hub being registered (interesting, as
they are disabled on this machine).
Then that's it.
Andy
ave tried burn't ISO's and loading the ISO into VMWare (VMWare
emulates the iso as an actual drive).
Odd - never had problems installing Mandrake 8.2 this way.
I'm just recreating the iso's off the current mirror contents and will
let you know.
Andy
Well, I now have the ISO burnt, but now I get:
I can't acess a Mandrake Linux Installation disc in your CDROM drive
(). Retry?
|Yes| |No| |Back|
Console:
Mounting /dev/hdc on /tmp/image as type iso9660
have to insmod isofs
succeeded isofs
Mount failed: Device or resource busy
Well, I now have the ISO burnt, but now I get:
I can't acess a Mandrake Linux Installation disc in your CDROM drive
(). Retry?
|Yes| |No| |Back|
Console:
Mounting /dev/hdc on /tmp/image as type iso9660
have to insmod isofs
succeeded isofs
Mount failed: Device or resource busy
device eth0 ip: 192.168.44.129 nm: 255.255.255.0 nw:
192.168.44.0 bc: 192.168.44.255
Andy
Fix for this error in case anyone else gets it.
Line 9
File: ./misc/perl5/vendor_perl/5.8.0/i386-linux/URPM.pm
Read
$VERSION = '0.10';
Should read
$VERSION = '0.50';
Andy
>
> Also getting the same errors on Mdk 8.2.
>
> Hints appreciated.
>
> >
Also getting the same errors on Mdk 8.2.
Hints appreciated.
>
> Will do - just got to move the files back onto my Mdk 8.2 box.
>
> When I try and compile on Mdk 8.1 I get:
>
> [andy@shuttle mandrake]$ /home/andy/mandrake/misc/MakeCD -t /home/andy/
> -a /home
> /andy
> "Andy Neillans" <[EMAIL PROTECTED]> writes:
>
> > The MakeCD command I am using is
> > /home/andy/mandrake/misc/MakeCD -t /home/andy/ -a
> /home/andy/mandrake/
> >
> > When it completes, my /home/andy/iso/Cooker directory is
> empty, and
I get the following at the end of my MakeCD (./MakeCD -t /home/andy/ -a
/home/andy/mandrake/) run
MISSING_DEPENDENCIES libxerces-c1.5-1.5.2-1mdk.i586
libstdc++-libc6.2-2.so.3
REJECTED Bastille-1.3.0-2mdk.noarch
REJECTED nss_wins-2.2.5-13mdk.i586
REJECTED locales-bn-2.3.1.3-3mdk.i586
y, you may achieve
> the same with a ide drive
>
Assume this is to be typed on the DrakX console - only problem is, I
can't type anything on it - once the install exited abnormally appears,
every freezes.
Andy
file or directory
install exited abnormally :-(
etc
Well, the 'Shuttle' devices only have two PCI slots, both of which are empty
on my machine.
Not sure if the Onboard sound and NIC are 'PCI' devices...
Andy
Chmouel Boudjnah wrote:
>
> You care or not but the guys who give you a nightmare each install has
> one Year++, Happy Birthday Pixel...
>
> --
> MandrakeSoft Inc http://www.chmouel.org
> Paris, France --Chmouel
wow man! happy Birthday fro
42 matches
Mail list logo
