Did not try that. Thanks for the tip.
Eric
David Sansome wrote:
>Same here, except unplugging the mouse and then plugging it again works.
>
>David Sansome
>
>On Tue, 2002-08-20 at 09:04, Eric Fernandez wrote:
>
>
>>Fresh install of beta 3, with a Logitech USB mouse optical + wheel.
>>That mous
Same here, except unplugging the mouse and then plugging it again works.
David Sansome
On Tue, 2002-08-20 at 09:04, Eric Fernandez wrote:
> Fresh install of beta 3, with a Logitech USB mouse optical + wheel.
> That mouse is correctly detected at install, but is not working at boot.
> The /dev/u
There is still a problem with the i845G chipset and this new 2.4.19
kernel, preventing hdparm to setup the UDMA5 mode for hard drive
(HDIO_SET_DMA failed: Operation not permitted). Moreover, there is an
error message at boot :
PCI: Device 00:1f.1 not available because of resource collisions
Thi
Please create a usb group corresponding to the group ID 43. It would
help the users of digital cameras, because they need to belong to that
group 43 to have access, as users, to their digital camera.
Thanks
Eric
My SB Live sound card is detected, but wrong modules are loaded at boot.
/etc/modules.conf contained after install :
alias sound-slot-0 snd-cmipci
which is wrong.
Should be :
alias sound-slot-0 snd-emu10k1
Fresh install of beta 3, with a Logitech USB mouse optical + wheel.
That mouse is correctly detected at install, but is not working at boot.
The /dev/usbmouse symbolic link is correctly created at boot, but it has
not target. It points to dev/input/mouse0, but this file is missing. I
run moused
"Bruce A. Mallett" <[EMAIL PROTECTED]> writes:
> Now that I'm back in the office, I just did a re-install and recreated the
> problem. The two files you requested are attached.
> The problem seems to be with the default monitor selection of "Plug-n-Play".
> If that is changed then it works.
ok
Now that I'm back in the office, I just did a re-install and recreated
the problem. The two files you requested are attached.
The problem seems to be with the default monitor selection of
"Plug-n-Play". If that is changed then it works.
- Bruce
Pixel wrote:
>"Bruce A. Mallet
I could not have the french language during install.
It says the language is not supported.
And I have no icon in the package groups selection. Is it normal ?
After selecting 4.2, then resolution, then Test I get a warning with the
following message:
An error occurred:
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()
try to change some parameters
Hi everyone,
just thought I'd tell you about my recent install
I installed beta 3 on a psoo mmx intel system with 132 meg of ram
It's slow , but everything works so far, even the cheap sound card in
the box
( sb generic card )
s3 trio video card
If it will run on this box it should run
garrick <[EMAIL PROTECTED]> writes:
> On Sat, Feb 23, 2002 at 11:52:39AM +0100, Pixel alleged:
> > garrick <[EMAIL PROTECTED]> writes:
> >
> > [...]
> >
> > > During the installtion, I was mucking around with the disk setup and noticed
> > > that if you failed to format a partition, you get a "
On Sat, Feb 23, 2002 at 11:52:39AM +0100, Pixel alleged:
> garrick <[EMAIL PROTECTED]> writes:
>
> [...]
>
> > During the installtion, I was mucking around with the disk setup and noticed
> > that if you failed to format a partition, you get a "mount failed" error
> > message that doesn't help v
garrick <[EMAIL PROTECTED]> writes:
[...]
> During the installtion, I was mucking around with the disk setup and noticed
> that if you failed to format a partition, you get a "mount failed" error
> message that doesn't help very much. It would be nice if the error message,
> at least, listed wh
MDK 8.2beta3 == total ownage! Great work everyone!
I spent several hours yesterday trying to get dri working on my new Dell
(Radeon VE) after installing redhat 7.2. After compiling a new kernel, new
xfree86, new drm and ati (from gatos), it still didn't work. Gatos and ati's
drm seem to be rea
"W. Kasberg" <[EMAIL PROTECTED]> writes:
> cups: on choosing to install cups printing system the installer
> asked to change to CD_1 but did not unmount/eject CD_2. Thus I had
> to cancel this action.
>
> After finishing the rest of the system installation I installed
> manually foomatics, cups
"W. Kasberg" <[EMAIL PROTECTED]> writes:
> cups:
> on choosing to install cups printing system the installer asked to change to
> CD_1 but did not unmount/eject CD_2. Thus I had to cancel this action.
can you confirm you installed MySQL?
cups:
on choosing to install cups printing system the installer asked to change to
CD_1 but did not unmount/eject CD_2. Thus I had to cancel this action.
After finishing the rest of the system installation I installed manually
foomatics, cups a.s.o. and installed the apropiate printers with pri
I installed beta3 over beta1/beta2/8.1 on a Dell Inspiron 8000.
1) The kdm login screen background is fixed.
2) Still dies on power events due to tha APIC problem.
Recompiled the kernel without APIC and it works well.
Sent Juan the dmidecode information for this machine.
3) make xconfig w
Can not setup printer during installation.
Asked which print service to use-choose Cups-
Necessary pkg are about 1/2 installed and CD2 is spit out.
No request is made for CD1 and the installation then stays at that point.
Output from console shows
rpmdb: var/lib/rpm/Basenames: No such file or dire
>
> Well, does DrakX issued automatic test of your card with a X server ? does it do
> that before ? Can you send me lspcidrake output for your system please
I assume you just want vid card...
Card:Matrox Millenium: Matrox|MGA 2064W [Millenium]
seems to be correct. lspcidrake also shows some
Blue Lizard <[EMAIL PROTECTED]> writes:
> Well let's see. Pixel: I had a prob at end of installer where i could not do a
> clean reboot. Got to that last dialog, removed boot media, clicked okay, dialog
> left, and the XFree86 from testing settings was of course defunct, tried to
> kill, couldn
Well, beta3 was put together far better than 2.
Mandrake-release-8.1-0.6mdk (if mem serves) was a prob for it in
depslist mismatch or something. Thanks till and others for fixing
printer troubles i had, although i am fairly sure it was simply part of
the updated driver package in there somewh
Radek Vybiral <[EMAIL PROTECTED]> writes:
[...]
> 1. Text installation is VERY ugly!
> I have reported this for Beta2.
> Pixel said "will fix this when i have some time"...
> Please TEST text installation also...
planned for this week
Hi,
there is my installation report:
1. Text installation is VERY ugly!
I have reported this for Beta2.
Pixel said "will fix this when i have some time"...
Please TEST text installation also...
2. Why is button "Update" in the second instalation screen "... classes
of installation"?
If I cho
Warren Doney <[EMAIL PROTECTED]> writes:
> Svein Erik Brostigen wrote:
> >
> > Hi!
> >
> > I installed Beta 3 on my home PC which is equipped with a Voodoo 3 graphics
> > card. This did not work very well!
> >
> > 1. The installation program does not handle the Voodoo 3 card at all. My screen
Here i report another bug in 7.2 beta 3 iso :
accentuated characters in French are not correct in helvetica 12 points
(but in roman, they are correct in bold). Curiously, they are correct at
the installation. But if you change fonts in the control center and then
return back to helvetica 12 poi
Svein Erik Brostigen wrote:
>
> Hi!
>
> I installed Beta 3 on my home PC which is equipped with a Voodoo 3 graphics
> card. This did not work very well!
>
> 1. The installation program does not handle the Voodoo 3 card at all. My screen
> looks like it uses 160x120 resolution and the text and g
Hi!
I installed Beta 3 on my home PC which is equipped with a Voodoo 3 graphics
card. This did not work very well!
1. The installation program does not handle the Voodoo 3 card at all. My screen
looks like it uses 160x120 resolution and the text and graphics are horrible.
It is not possible to i
Pixel wrote:
> John Grange <[EMAIL PROTECTED]> writes:
>
> > Pixel wrote:
> >
> > > Derek Wildstar <[EMAIL PROTECTED]> writes:
> > >
> > > > Can ldconfig be run immediately before the X configuration section, then
> > > > again after as needed? This would also fix the problem of having a wasted
John Grange <[EMAIL PROTECTED]> writes:
> Pixel wrote:
>
> > Derek Wildstar <[EMAIL PROTECTED]> writes:
> >
> > > Can ldconfig be run immediately before the X configuration section, then
> > > again after as needed? This would also fix the problem of having a wasted
> > > install if one tests t
Pixel wrote:
> Derek Wildstar <[EMAIL PROTECTED]> writes:
>
> > Can ldconfig be run immediately before the X configuration section, then
> > again after as needed? This would also fix the problem of having a wasted
> > install if one tests their X configuration and it fails.
>
> this ldconfig bu
Derek Wildstar <[EMAIL PROTECTED]> writes:
> Can ldconfig be run immediately before the X configuration section, then
> again after as needed? This would also fix the problem of having a wasted
> install if one tests their X configuration and it fails.
this ldconfig bug in cooker will be fixed
I believe there is some sort of problem with GRUB. I run on a 350mhz AMD
chip and IDE enhanced drives. No SCSI this time. Just SCSI scanner. I
decided to use GRUB instead of LILO for the first time, since I have
large drives.
The problem is now that Norton Anti Virus no longer works. When it loa
Ok, I took the plunge and tried to upgrade my main (non-server devel
machine) Mandrake 7.0 machine to 7.1. The upgrade system still has a long
way to go... it was 4x as long as an install! Anyways, here are a few
install issues with the upgrade:
When you upgrade the Crypto stuff, I get this err
OK here goes =)
System: intel dual pIII, 512M ram, Mylex DAC960P V4 RAID5
Mylex is configured with write-thru cache
When installing in expert mode with all ReiserFS partitions, the install
proceeds flawlessly but when the system reboots the DAC960 and ReiserFS
modules appearently collide, causi
36 matches
Mail list logo
