You don't have to go back to 3.3.6, just comment the
"DisableVidModeExtension" line in the "ServerFlags"
section of your "/etc/X11/XF86Config-4"
...
Section "ServerFlags"
# Option "DisableVidModeExtension"
Option "blank time"
Option "standby time" "20"
Option
Ray Carlino wrote:
>
> How can I change back to xfree 3.3?
> I tried running xconfigurator but it locks the comouter up when it runs the
> test.
> Vmware full screen is not supported with 4.0
? For Win98 SE it works on a Asus TNT2 under 2.2.17... VMWare 2.0.2
>
> Ray
>How can I change back to xfree 3.3?>I tried running xconfigurator but it locks the
>comouter up when it runs the
>test.
>Vmware full screen is not supported with 4.0
>
>Ray
>
why don't you use XFDrake. It is probably beter and if it doesn't work you can nag
pixel.
_
Ray Carlino a écrit :
>
> How can I change back to xfree 3.3?
> I tried running xconfigurator but it locks the comouter up when it runs the
> test.
> Vmware full screen is not supported with 4.0
Just change the symlink /etc/X11/X to the correct XFree server in
/usr/X11R6/bin.
Of course, make sure
How can I change back to xfree 3.3?
I tried running xconfigurator but it locks the comouter up when it runs the
test.
Vmware full screen is not supported with 4.0
Ray
Lorne Shantz wrote:
>
> Randy Welch wrote:
>
> > So did you have an invisible cursor? Or is this a curse only found on
> > the 16M cards?
> >
> > (Ctrl-Alt + or -) rotates through the display resolutions).
> >
> No invisible cursor, but I was unable to rotate through the displays. ??
> I got 16
Randy Welch wrote:
> So did you have an invisible cursor? Or is this a curse only found on
> the 16M cards?
>
> (Ctrl-Alt + or -) rotates through the display resolutions).
>
No invisible cursor, but I was unable to rotate through the displays. ??
I got 1600x1200 and the only way I got past it
Submitted 30-May-00 by Anton Graham:
| Submitted 30-May-00 by Pixel:
| | "B. K. Barley" <[EMAIL PROTECTED]> writes:
| |
| | > Yes,
| | >
| | > I get this problem also. But I assume it's because the ldconfig is not run
| | > and it is not loading the dri module in the xf86config-4 file. Pixel
Submitted 30-May-00 by Pixel:
| "B. K. Barley" <[EMAIL PROTECTED]> writes:
|
| > Yes,
| >
| > I get this problem also. But I assume it's because the ldconfig is not run
| > and it is not loading the dri module in the xf86config-4 file. Pixel, is it
| > possible to get the xconfig file upda
| AG wrote:
|
| > On Tue, 30 May 2000, B. K. Barley wrote:
| >
| > | Yes,
| > |
| > | I get this problem also. But I assume it's because the ldconfig is not run
| > | and it is not loading the dri module in the xf86config-4 file. Pixel, is it
| > | possible to get the xconfig file update
"B. K. Barley" <[EMAIL PROTECTED]> writes:
> Yes,
>
> I get this problem also. But I assume it's because the ldconfig is not run
> and it is not loading the dri module in the xf86config-4 file. Pixel, is it
> possible to get the xconfig file updated so it will work on Vodoo3 3000
> cards
nitor. I installed the fb
kernel.
B. K. Barley
-Original Message-
From: Lorne Shantz [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 30, 2000 2:50 PM
To: [EMAIL PROTECTED]
Subject: Re: [Cooker] XFree 4.0 and DPMS and USB happiness
How ironic. I have the exact same set up as you do! 32mb of r
Lorne Shantz wrote:
>
> How ironic. I have the exact same set up as you do! 32mb of ram but only
> a single head setup. I found that even though I selected 1024x768 I got
> 1600x1200. It took me awhile to figure out how to lower the resolution,
> since none of the old utilities for changing resol
How ironic. I have the exact same set up as you do! 32mb of ram but only
a single head setup. I found that even though I selected 1024x768 I got
1600x1200. It took me awhile to figure out how to lower the resolution,
since none of the old utilities for changing resolution work yet. But it
seems a
Does it actually work?
I can't seem to get it to do anything with my Matrox G400 and Viewsonic
PS790.
(3.3.6 seems to work or at least under Mandrake 7.0)
On another front I am happy that USB seems to work. I can get photos
off my Kodak DC290 camera with ks. I can skip using the wife/kids
Win
You can get the Glide SDK from www.3dfx.com...
-Chris
On Fri, 19 May 2000, you wrote:
> I like to rebuild XFree-4.0 by my self.
> When I do a rpm --rebuild on the XFree86-4.0-6mdk.src.rpm I get
> error: failed build dependencies:
> Glide_SDK is needed by XFree86-4.0-6mdk
>
> I can't find Gid
I like to rebuild XFree-4.0 by my self.
When I do a rpm --rebuild on the XFree86-4.0-6mdk.src.rpm I get
error: failed build dependencies:
Glide_SDK is needed by XFree86-4.0-6mdk
I can't find Gide_SDK anywhere but someone here mus have built XFree86-4
as a src.rpm so can someone point me to Gli
17 matches
Mail list logo
