"Andy Neillans" <[EMAIL PROTECTED]> writes:
> > > Anything special you're doing? Any special hardware?
>
> Network Adapter is a Pcnet/PCI II 79C970A in the VMWare session (worked
> since Mdk 7.2 AFAIK).
> Realtek 8139 (normally use 8139too module) in another.
>
> Both same error.
Ok, trying to
On Wed, 31 Jul 2002 01:22, Andy Neillans wrote:
> few lines about usbdevfs and a usb hub being registered (interesting, as
> they are disabled on this machine).
Disabling BIOS access to a device is not the same as disabling the device.
Linux will still use it.
However, some BIOSes do also disab
"R. Scott Chevalley" <[EMAIL PROTECTED]> writes:
> I also have been having a problem with the 9.0 beta iso images. I've
> burned about 5 copies of it and none of them will install. It will
> get to the Loading program box, the bar graph will go 60% across and
> then I'll get an error about not
> > > Installing with network.img
> >
> > You didn't precise which network install you chose. Assuming NFS.
Tried HTTP, NFS and FTP. All same error.
> > > Network adapter was autodetected correctly.
> > > Specified DHCP
> > > Supplied host and domain name.
> > >
> > > Install Exited Abnormal
> > > Well, I now have the ISO burnt, but now I get:
> > >
> > > I can't acess a Mandrake Linux Installation disc in your
> CDROM drive
> > > (). Retry?
> > >
> > > |Yes| |No| |Back|
> > >
> > > Console:
> > > Mounting /dev/hdc on /tmp/image as type iso9660
> > > have to insmod isofs
> > >
On Tue, 2002-07-30 at 14:23, Guillaume Cottenceau wrote:
> I just tested on a machine without a regular floppy drive, it
> doesn't segfault neither :-(.
Must be something else causing it...I really don't get what :\
> > With my laptop, I can't get Mandrake to install with Sony's PCMCIA CD
> >
On Tue, 2002-07-30 at 14:23, Guillaume Cottenceau wrote:
> > With my laptop, I can't get Mandrake to install with Sony's PCMCIA CD
> > drive; it will boot off it just fine but won't see it after that, so
> > when it gets to package selection it can't read the CD and says 'no
> > hdlists found!' (
Alexandre BARRE <[EMAIL PROTECTED]> writes:
> Hi,
>
> I got same kind of problems.Impossible to make a complete installation from
> CDs.
you provide no information!!
--
Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
On Tue, 2002-07-30 at 12:08, Guillaume Cottenceau wrote:
> Adam Williamson <[EMAIL PROTECTED]> writes:
>
>
> [...]
>
> > BTW, Guillaume, this is the exact same thing that happens with my failed
> > network installs. As I mentioned, the sole common factor between the two
> > PCs on which it fail
Adam Williamson <[EMAIL PROTECTED]> writes:
[...]
> BTW, Guillaume, this is the exact same thing that happens with my failed
> network installs. As I mentioned, the sole common factor between the two
> PCs on which it fails for me is using the same Sony USB floppy drive.
hmm.. the problem bein
On Tue, 2002-07-30 at 08:12, Guillaume Cottenceau wrote:
> "Andy Neillans" <[EMAIL PROTECTED]> writes:
>
> > Installing with network.img
>
> You didn't precise which network install you chose. Assuming NFS.
>
> > Network adapter was autodetected correctly.
> > Specified DHCP
> > Supplied host a
> > Well, I now have the ISO burnt, but now I get:
> >
> > I can't acess a Mandrake Linux Installation disc in your CDROM drive
> > (). Retry?
> >
> > |Yes| |No| |Back|
> >
> > Console:
> > Mounting /dev/hdc on /tmp/image as type iso9660
> > have to insmod isofs
> > succeeded isofs
>
"R. Scott Chevalley" <[EMAIL PROTECTED]> writes:
> I also have been having a problem with the 9.0 beta iso images.
> I've burned about 5 copies of it and none of them will install.
> It will get to the Loading program box, the bar graph will go 60%
> across and then I'll get an error about not be
"Andy Neillans" <[EMAIL PROTECTED]> writes:
> Well, I now have the ISO burnt, but now I get:
>
> I can't acess a Mandrake Linux Installation disc in your CDROM drive
> (). Retry?
>
> |Yes| |No| |Back|
>
> Console:
> Mounting /dev/hdc on /tmp/image as type iso9660
> have to insmod isofs
>
I also have been having a problem with the 9.0 beta iso images. I've
burned about 5 copies of it and none of them will install. It will get
to the Loading program box, the bar graph will go 60% across and then
I'll get an error about not being able to execute /usr/bin/runinstall2.
I was ab
Well, I now have the ISO burnt, but now I get:
I can't acess a Mandrake Linux Installation disc in your CDROM drive
(). Retry?
|Yes| |No| |Back|
Console:
Mounting /dev/hdc on /tmp/image as type iso9660
have to insmod isofs
succeeded isofs
Mount failed: Device or resource busy
Andy
Matias Griese <[EMAIL PROTECTED]> writes:
> P90 (Socket5 MB), 32M, ATI Rage 2+ / network.img
> on normal, vgalo and text installations (after long waiting):
>
> -- cut --
>
> in second stage install
> install exited abnormally -- received signal 9
Probably stage 2 not in sync with stage 1.. tr
> P90 (Socket5 MB), 32M, ATI Rage 2+ / network.img
> on normal, vgalo and text installations (after long waiting):
Forgot to tell that this message come on Mandrake 7.2beta3..
Regards,
Matias
18 matches
Mail list logo
