On Thu, 2003-11-06 at 12:19, Andreas wrote:
Hi all!
Yesterday I installed the new OSX Panther on my ibook. Now I cannot
boot Linux.
My boot partition is on /dev/hda11, swap on 12 and my system on 13.
I tried the rescue-system with
mount /dev/hda11 /mnt -- dont work, because must
On Thu, 2003-11-06 at 13:19, Andreas wrote:
On Thu, 2003-11-06 at 12:19, Andreas wrote:
What had I best do? New installation?
No.
It seems ybin didn't write to the OF the right command for the boot,
so
do it yourself:
Jump to Open Firmware by pressing COMMAND-OPTION-O-F (apple key
On Thu, 2003-11-06 at 13:19, Andreas wrote:
On Thu, 2003-11-06 at 12:19, Andreas wrote:
Hi all!
mount /dev/hda13 /mnt and
chroot /mnt
ybin -v
..
After reboot no bootmanager again.
I'm surprised ybin didn't complain about no /proc mounted. Normally
you
need to mount
On Fri, 2003-08-22 at 16:23, Isaac wrote:
anyone know what this could be? i just get this error and can't install
anything via rpmdrake:
perl: rpmio_internal.h:447: c2f: Assertion `fd fd-magic == 0x04463138'
failed.
Aborted
i get the same message if i just run gurpmi at the command
There seems to be nothing in the ppc subdirs on every mirror I tried,
including:
ftp://sunsite.uio.no/pub/unix/Linux/Mandrake/Mandrake-devel/cooker/ppc/Mandrake/RPMS
As anyone noticed the same problem ?
I hope this is a temporary rsync problem...
--
Brice
On Thu, 2003-07-10 at 13:27, [EMAIL PROTECTED] wrote:
Yes, I have the same behaviour on my ibook 2rev2 700 combo (MDK9.1).
More precisely I boot in text mode (with video=ofonly) and every think
is fine but when I start X with [sudo /etc/init.d/dm start], X 4.3 with
dri works but the virtual
On Thu, 2003-07-10 at 15:51, [EMAIL PROTECTED] wrote:
Great but:
I've found this, but no benh 2.4.21 in rpm:
http://rpms.mandrakeclub.com/rpms/MandrakeClub/test/9.1/ppc/kernel-benh-2.4.20-10mdk.ppc.html
I usually rsync the sources from the benh repository, then patch for
supermount and
Any opinions on using 700MB ISOs?
I'm OK to have 700MB iso.
I don't plan to install my mdk-ppc on old mac...
Brice
Hmm, I'll have to look at the mandrake kernel dri and see if it's newer
and if it can be wedged into the benh version.
Yes, Mandrake version is newer, since it uses the gatos version (I
think).
And yes you can patch benh's kernel relatively easily, I've done it
several times (all the 2.4.19 and
On Thu, 2002-12-05 at 00:29, Patrick Ladam wrote:
My question is: how can I re-install yaboot from my still existing
MDK distro? I tried the rescue mode with the install CD to launch
ybin but a bunch of binaries used by ybin (hfsutils among others)
are not found. Then I edited the ybin script
On Wed, 2002-11-27 at 17:16, Thomas Geenen wrote:
On Wednesday 27 November 2002 17:12, you wrote:
Le Mercredi 27 Novembre 2002 14:42, Stew Benedict a écrit :
BTW - your mailer is overriding the Reply To: for the list so I have to
reply to all recipients for my answers to hit the list.
There are 671 packages to install, for about 650 MB.
Urpmi give me the following errors for every package:
Installing package needs 918Mb on the /var filesystem
[snip]
I've seen similar messages with the packages with the broken .db files
(cyrus-sasl - fixed one on my web
Any ideas how I can get my cooker install back up and running without
doing a reinstall of it as well?
Boot to OpenFirmware:
1) switch on, your mac, while pressing Command Option O F.
2) Then enter the magic boot line (which depends on your linux bootstrap
partition):
setenv hd:[your
* Desperately no mouse/trackpad. I tried to revert to 8.2
devfsd/hotplug/initscripts/gpm but no chance, and nothing appears in the
logs.
gpm starts without troubles, but does not log anything.
Kdm or X don't log anything unusual about the mouse.
What is 'funny' is that booting with
Hi all,
It seems I'm running into some other problems on my quest for cooker:
* the locales-2.3.1.3-1mdk and locales-en-2.3.1.3-1mdk seems broken
(even if the md5 sums and the gpg signature are OK):
in /usr/share/locale/en/ LC_COLLATE and LC_CTYPE points respectively to
Hi all,
Since I've bought my iBook, I wanted to upgrade to cooker ppc (as I do
it on my pc).
My first attempts resulted in a severe crash of the computer (mainly
because updating glibc from 2.2.4 to 2.2.5 seems to break the install).
I tried again yesterday, but was able to rescue a little bit
It seems to warn about a missing mousedev module.
I then booted with the latest benh's kernel, and the mouse's working
fine with it.
The upgrade didn't change the kernel.
Does anyone might have an idea on how to fix this problem ?
Odd - there is no mousedev module, and usb
Or am I using a completely broken mirror (ftp.proxad.net listed from
mandrake website) ?
Looking at my repository, I've got /RPMS/perl-URPM-0.50-6mdk.ppc.rpm. A
full listing looks like it's up-to-date with perl5.8. (it was built Jul
26). I'm using urpmi regularly myself.
its date
Hi all,
I've succedeed in the install of my 8.2 PPC on my new iBook (radeon
enabled).
I had to perform the install in text-mode (even video=ofonly did not
work).
Now everything is working (at least XFree, but no sound, no DRI), and
I'm trying to upgrade to the latest cooker, but there's a lot of
On Fri, 2002-07-19 at 12:59, Stew Benedict wrote:
[ snip ]
Here is a trace of the problem:
libgcc = 3.1.1-0.7mdk is needed by gcc-3.1.1-0.7mdk
rpm = 4.0.4-6mdk is needed by perl-URPM-0.06-2mdk
perl-base = 2:5.8.0 is needed by perl-MDK-Common-1.0.3-4mdk
...
Should have
20 matches
Mail list logo