Dear Sam, Matus, et al.:
My project to install and configure Courier on our DigitalOcean hosted
FreeBSD 11.0 based VPS is now substantially further along. This message is to
report what installation steps work reliably on a current FreeBSD system. I
have updated the subject header of th
CPPFLAGS to the
configure script.
With continuing appreciation,
Michael
> On Dec 12, 2016, at 5:22 PM, Sam Varshavchik wrote:
>
> Michael S. Scaramella, Esq. writes:
>
>> Libtool 2.4.6 and Courier Unicode 1.4 are now reinstalled from source. I ran
>&g
Dear Courier Users:
I am a new list subscriber working toward email independence based upon
the Courier Mail Server. This transition was prompted by Verizon’s recent
decision to block all outgoing email not sent from email addresses at its own
domain. I am building a VPS hosted by Digit
Hello.
First of all sorry for my bad English.
Since yesterday my Courier MTA makes trouble.
I am Using Debian Lenny with this Courier Packages:
courier-authdaemon/stable uptodate 0.61.0-1+lenny1
courier-authlib/stable uptodate 0.61.0-1+lenny1
courier-authlib-mysql/stable uptodate 0.61.0-1+lenny1
connection to
mail server
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Sam
Varshavchik
Sent: Wednesday, July 23, 2008 4:41 PM
To: courier-users@lists.sourceforge.net
Subject: Re: [courier-users] COURIER TIMEOUTS
Julie S. Lin writes:
> courier i
courier idle timeout
after logging into courier, does the server automatically time you out?
if so, where is this variable set?
I am running latest courier. thanks.
J
-
This SF.Net email is sponsored by the Moblin Your Mov
ourier::Filter version 0.17, but after reading the
Changelog, I'm guessing this won't make a lot of difference.
Thanks all,
-
| Name: Tim Nelson | Because the Creator is,|
| E-mail: [EMAIL PROTECT
Hi
is there a way in spf to exempt an entire domain or specific address?
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.ne
my delivery status motifications are being eaten by my tmda whitelist
is there I can get courier to specify a from address for bounce backs?
I currently get "From: Courier mail server at myvest.com <@>"
i.e. no email address
I am not sure what process courier uses to send these "NOTICE: Mail
de
nt list software in each case, I did not collect
any descriptions of the list settings required.
----- Original Message -
From: "Leigh S. Jones, KR6X" <[EMAIL PROTECTED]>
To: "courier-users"
Sent: Wednesday, March 19, 2008 5:46 AM
Subject: Re: [courier-users] Is my SP
Mailing lists and SPF can conflict. It's all in the settings that the
mailing list admin
uses to forward messages. It may depend on whether the sender of the
message
being forwarded by the list has SPF enabled. If your SPF settings are 100%
correct, and you have SPF enabled, it can still be fo
, the list.dsbl.org blacklist might rate 0.5 points
in a weighted system like Spamassassin -- not nearly enough to cause rejection
unless other factors weigh in heavily.
- Original Message -
From: Enrique Verdes
To: Leigh S. Jones, KR6X
Sent: Monday, March 03, 2008 6:27 AM
Subjec
Although Jay Lee gives good advice, there is more information to be given.
First of all, the whitelisting and manual blacklisting is done by adding IP
blocks to a file in the directory /etc/courier/smtpaccess. Well, this
directory could be changed during the build process, but that is the norma
NED MESSAGE-----
> Hash: SHA1
>
> "Leigh S. Jones, KR6X" <[EMAIL PROTECTED]> wrote on 2008-Feb-04:
>> In the past 24 hours the heavy stream of "LOGIN
>> FAILED" log entries (since I began using the technique) has been cut to
>> zero.
>
> Just t
On the theory that the dictionary attacks on my POP3 and IMAP ports came
from hosts that were "frustrated" by the ability of the program "denyhosts"
to thwart attacks on ssh ports, I converted the "hosts.deny" list produced
by "denyhosts" (using a word processor) to the format required by makeda
6:53 PM
Subject: Re: [courier-users] attacks
> Leigh S. Jones, KR6X wrote:
>> I created the macro (variable) $TCPDACCESS pointing to my ".dat"
>> file and tucked it in in front of $TCPDOPTS in the call starting up
>> the daemons in "/etc/init.d/courier-pop"
the change, but haven't yet proven to myself that
couriertcpd is rejecting anyone.
- Original Message -
From: "Jérôme Blion" <[EMAIL PROTECTED]>
Cc:
Sent: Sunday, February 03, 2008 4:01 PM
Subject: Re: [courier-users] attacks
Sam Varshavchik a écrit :
> Leigh S. Jones,
I'm getting fed up with my bandwidth being gobbled up by numerous attackers
running dictionary attacks on my users passwords for pop3 and imap logins. To
that end, I'm hoping to enlist the aid of couriertcpd.
The way I understand it, I need to build an access file with IP addresses
followed by
Consider creating an alias for this user -- incoming mail can be rejected by a
false alias, but later reversed.
- Original Message -
From: Jay Lee
To: Peter Burden
Cc: courier-users@lists.sourceforge.net
Sent: Monday, January 28, 2008 9:59 AM
Subject: Re: [courier-users] Cl
> Mark Constable writes:
>
>> Apologies if this is a generic SPF question not related
>> to Courier specifics. If so then please point me in the
>> right direction.
>>
>> Say a mailing-list has 70 members and the original owner
>> of the list sends as...
>>
>> From: [EMAIL PROTECTED]
>> To: [E
See two comments marked thusly: ***
> - Original Message -
> From: "Lisa Muir" <[EMAIL PROTECTED]>
> To: "Sam Varshavchik" <[EMAIL PROTECTED]>
> Cc: "courier-users"
> Sent: Wednesday, January 16, 2008 10:00 PM
> Subject: Re: [courier-users] DNS lookup blacklist
>
>
>> On Jan 16, 200
I really don't wish to contradict the highly respected Sam and Gordon, but
their zone transfer idea is not really the preferred way to do DNS zone
transfers from a blacklist server. It wastes too much bandwidth online for
dozens or hundreds of mail servers to do this kind of transfer. Most of
Leigh Jones writes:
I don't want to tread on toes too very hard here.
It seems to me that Sam Varshavchik has been clear here, but the brevity
with which he has spoken belies the depth of meaning.
So let me attempt to expound.
If you come from the background of running a very "tiny" linux
imp
This is happenning to us all. It's not a DDoS attack, just a spammer
spoofing addresses at your domain.
Zenon Panoussis writes:
>
> For weeks on end now I am being subjected to what I could call a reverse
> spam DDoS attack for lack of better term. Some asshole is se
- Original Message -
From: "Gordan Bobic" <[EMAIL PROTECTED]>
[EMAIL PROTECTED] wrote:
>> No one has mentioned that it's necessary to wait until
>> the possible spammer identifies his target to know
>> whether the target has him whitelisted.
Gordan wrote:
> Whitelists aren't really pra
To sum up what has been said on this issue thus far,
some believe that it's inefficient to wait until the target of
the spammer has been identified to send the 511, while
others believe it's nice to be able to identify the user
who has been targeted in the logs in order to ease the
facilitation of
I've been receiving these kinds of messages myself. And, in fairly large
numbers. In my case, when I trace it back to the source, I discover
that someone is using an invalid user name from my domain as the
envelope sender address when sending spam. A non-delivery message
then bounces back to the
It might be wise to say that every installation is different and has a
different set of optimal settings.
First of all, you'll need to check your logs for "517 SPF fail" messages for
a while to find addresses you need to whitelist when you first enable SPF
checking. If you have anyone who send
I had been having a problem with 517 SPF fails bounces myself; it included
problems from [EMAIL PROTECTED] so the list sent
me a nastygram telling me I would be kicked off. At the same time another
list was telling me the same thing. I could see the SPF bounces in the mail
log. When I greppe
ill cause Courier to accept mail for all
subdomains of this domain.
am I missing anything else?
J
Gordon Messmer wrote:
> Julie S. Lin wrote:
>
>> HI Gordon,
>>
>> currently it's a fresh install, no users, nothing. i'd like
>> some docs to be able
HI Gordon,
currently it's a fresh install, no users, nothing. i'd like
some docs to be able to configure process mail for
[EMAIL PROTECTED], and use webmail at mail.foo.bar.com
J
Gordon Messmer wrote:
>Julie S. Lin wrote:
>
>
>>I have a mailserver, aeon.corp.myvest
Hi
I have a mailserver, aeon.corp.myvest.com. i want it to serve mail
for another domain, say foo.bar.com, and ONLY for that domain.
is this possible? i'm playing around with it a bit and having trouble.
can someone point me to appropriate docs?
J
--
Hi,
I searched the web docs and courier archives but couldn't find the answer.
I am on rr.com and my mail server currently sends out mail just fine,
except to any other rr.com domain, however, I know that if I set the
outgoing mail to all go through my ISP's outgoing smtp server, then it
should all
ith extension addresses, some MTAs set these variables by default,
others must be configured to do so.
Sam Varshavchik wrote:
> Julie S. Lin writes:
>
>> Hi
>>
>> i'm having problems finding documentation on how to enable /verify
>> that my courier configuration
Hi
i'm having problems finding documentation on how to enable /verify
that my courier configuration supports extension addresses & is setting
environment variables correctly. i'm trying to get tmda set up.
i'm running courier-0.52.2. can someone point me in the right
direction? I'd greatly a
| Because the Creator is,|
| E-mail: [EMAIL PROTECTED] | I am |
-
BEGIN GEEK CODE BLOCK
Version 3.12
GCS d+++ s+: a- C++$ U+++$ P+++$ L+++ E- W+ N+ w--- V-
PE(+) Y+>++ PGP->
-
| Name: Tim Nelson | Because the Creator is,|
| E-mail: [EMAIL PROTECTED] | I am |
-----
BEGIN GEEK CODE BLOCK
Version 3.12
GCS d+++ s+: a
BEGIN GEEK CODE BLOCK
Version 3.12
GCS d+++ s+: a- C++$ U+++$ P+++$ L+++ E- W+ N+ w--- V-
PE(+) Y+>++ PGP->+++ R(+) !tv b++ DI D G+ e++> h! y-
-END GEEK CODE BLOCK-
-
Using Tomcat but need to
:131.238.75.40,from=<[EMAIL PROTECTED]>,to=<[EMAIL
PROTECTED]>:
556 Address unavailable.
Sep 18 16:00:00 mail courieresmtpd:
error,relay=:::131.238.75.40,msg="502 ESMTP command error",cmd: DATA
Thanks for any help you can provide,
Brian
On Mon, September 18, 2006 15:15,
Hi all,
I would like to set up my email server (courier-mta) so that it is not
case sensitive.
IE, [EMAIL PROTECTED] is the same as [EMAIL PROTECTED]
Currently email sent to [EMAIL PROTECTED] is returned "User Unknown".
How would I accomplish this change?
Thanks,
Brian
--
"All people who thi
I need to make some changes one of our hosted domains. While I am
making those changes I would like Courier to reply with a "Service
temporarily unavailable" error for that domain only. Is there an easy
way to achieve this?
--
Jacob S. Barrett
Chief Technology Officer
Po
Hi
Can anyone tell me why I'd be getting the behavior below? I'm trying to
send mail to [EMAIL PROTECTED] from a machine
foo.bar.baz ...
under smtpaccess i have a file with the following line
192.168.X.XAUTH_REQUIRED=0,BOFHNOVRFY=1,allow,RELAYCLIENT
(address of foo.bar.baz)
Jul 13 13:37:53
Hi
i did "courier clear [EMAIL PROTECTED]" and verified by logged into all
individual users accounts on this alias
that they can receive mail. any other ideas?
J
Sam Varshavchik wrote:
> Julie S. Lin writes:
>
>> i am receiving the error below and not sure how to procee
Hi
i am receiving the error below and not sure how to proceed. I have
reviewed archives and did the courier clear
on the account, but still no luck.
Jun 29 12:46:16 mailserver courieresmtpd:
error,relay=:::xxx.xxx.xxx.xxx,from=<[EMAIL PROTECTED]>,to=<[EMAIL
PROTECTED]>
: 456 Address tempor
i am receiving the error below and not sure how to proceed. I have
reviewed archives and did the courier clear
on the account, but still no luck.
Jun 29 12:46:16 mailserver courieresmtpd:
error,relay=:::xxx.xxx.xxx.xxx,from=<[EMAIL PROTECTED]>,to=<[EMAIL
PROTECTED]>
: 456 Address temporar
On Jun 13, 2006, at 3:31 PM, Sam Varshavchik wrote:
> Jacob S. Barrett writes:
>
>> Is there a flag that can be added to esmtproutes or similar that
>> forces all messages to be converted to 7bit encoding for specific
>> domains. I have a customer who is se
Is there a flag that can be added to esmtproutes or similar that
forces all messages to be converted to 7bit encoding for specific
domains. I have a customer who is sending emails to a broken email
server which announces support for 8bitmime but barfs when you try to
actually send it 8bitm
Hi,
I'm getting the following errors when trying to establish a 993 ssl
connection and it's hit and miss.
every once in a while it'll work just fine, but other times I get weird
errors.
The two most common are ...
imapd-ssl: /usr/lib/courier/bin/couriertls: error while loading shared
libra
Hi All,
i'm trying to get spamassassin to filter mail to an email alias
"[EMAIL PROTECTED]" .
in my courier aliases files "list" I have
hostmaster :user x, user y, user z
how can I go about doing that? from my research it's a matter of
directing mail to a some file, run the spam filtering
Jacob S. Barrett wrote:
Jacob S. Barrett wrote:
So two questions:
1) Is there a way to have maildrop hard fail the delivery of a message
if the file is larger than quota and soft fail only when the message
size is < quota but puts it over the limit?
2) Is there a way to shutoff the
Michael Nguyen wrote:
So, what I'd like to do is setup quota for the simple purpose of
tracking the size of a maildir. I don't want to reject messages or
generate any sort of quota errors. What's the best way to do this? At
first, I tried setting the quota really high, but we have users who
Jacob S. Barrett wrote:
So two questions:
1) Is there a way to have maildrop hard fail the delivery of a message
if the file is larger than quota and soft fail only when the message
size is < quota but puts it over the limit?
2) Is there a way to shutoff the new "Address T
I have a unique situation that is driving me nuts. We have some
customers with 100MB+ quotas that often send/receive 30MB+ emails so we
have a high limit in the sizelimit file. Well we have other accounts
that have much lower quotas say around 10MB. The problem we are running
into lately is
On 1/19/06, Gordon Messmer <[EMAIL PROTECTED]> wrote:
What are you trying to do with .courier? You can probably accomplishwhat you want with instructions in .mailfilter
Thanks for the help!
I want to read the all the variables. I think it can be possible only
by .courier rt? My main intension i
Dear Group.
I had created #Home/.courier and #Home/.mailfilter. I need the working of both. I specify mailbox specifing using .courier and spamassain using .mailfilter. Both the configuration works propely. If there is only .courier file the function specified in the same works and if there is
Dear Group.
I had a problem with courier mail server. I need to authenticate the
mails via esmtp,only the valid users must able to send mail via my mail
server. So I made
AUTH_REQUIRED=1 in /etc/courier/esmtpd
But my problem is that, I could sucessfully use this mechanism from all mail clinets,th
Dear Group.
I would like to share few ideas with the group.I am newbie to courier and my experice with courier is for last 2 month. Well if you already have this probelm just ignore it. I think this can help newbies like me.
I found courier-imap server is a good and fast for IMAP protocol
On 9/29/05, Gordon Messmer <[EMAIL PROTECTED]> wrote:
You can write a script that reads a messages on stdin, modifies theinformation you want, and prints the message to stdout. Call thatscript using "xfilter" in your maildrop filter file.
Thanks for your help,Mr.Gordon.
Yes, I tried to get the
Dear Group.
I had another issue. I created a web site called www.postbox.com, let
me say it have the ip address 192.168.0.10 . With a dns server running
on it. I need to setup a mailserver called mail.postbox.com which
must be running on a remote system(same network) and its IP n
Dear Group.
As per your prevoius help(by Sam) I had setup the virtual folders and acl. The things are working fine.
Now my new problem is,is it possible to re-write the header of mail by
any of the courier filters or perprocessors. My problem is that. I had
a publich sharable folder to all my
Dear Group.
As per your prevoius help(by Sam) I had setup the virtual folders and acl. The things are working fine.
Now my new problem is,is it possible to re-write the header of mail by
any of the courier filters or perprocessors. My problem is that. I had
a publich sharable folder to all my use
On 9/23/05, Sam Varshavchik <[EMAIL PROTECTED]> wrote:
Again, this has nothing to do with virtual shared folders.You
cannot mix virtual shared folders with filesystem-based shared folders
(Maildir-shared, the -S option, et al). Pick one, or the
other.Again, read README.sharedfolders again,
ead maildir/README.sharedfolders.txtDid you read it?
Yeh Now I read it and created the virtual one ,with commands "sharedindexinstall" generated by "authenumarate -s"
Now I had another problem,
I made a user admin with his maildir(Maildir-shared) with -S option using maildirmake and
On 9/21/05, Sam Varshavchik <
[EMAIL PROTECTED]> wrote:
Correct. You need to use virtual accounts and virtual shared folders.
Thanks for your sugession!
Now I had set up a shared folder,say "comments" in one of my virutal
user(i use mysql database to store the virtual domain and its
users),
sa
On 9/21/05, Sam Varshavchik <[EMAIL PROTECTED]> wrote:
Correct. You need to use virtual accounts and virtual shared folders.
Thanks for your sugession!
Now I had set up a shared folder,say "comments" in one of my virutal
user(i use mysql database to store the virtual domain and its
users),
say,
Geeze, silly me, I forgot the \ before the [ and ]
Methinks I shouldn't work that late at night...
Thanks Jerry!
(and yes, I know it was off topic for this list.)
b
On Tue, September 20, 2005 01:15, Jerry Amundson wrote:
> On Mon September 19 2005 19:46, Brian S. Meehan wrote:
>
On 9/20/05, Sam Varshavchik [EMAIL PROTECTED]> > My
> This is filesystem-based shared folders, which do not use
> ACLs.You need to set up virtual shared folders.
Well, thanks for your sugession.
My problem is that, I need to make a multiple virtual domains in one machine and each virtual
Dear Group.
I am very new to courier. I am really got confused with, what is the difference between courier shared folder and public folder.
My problem is that I need one user account with a sharable folder, and this folder must have different
level of access control to differnt virtual users in
I checked out the URL at http://wiki.apache.org/spamassassin/WritingRules
and can't seem to get a rule to work in /etc/mail/spamassassin/local.cf
Here's what I've got so far:
header LOCAL_SPAM_SUBJECT_RULE Subject =~ /[SPAM]/i
score LOCAL_SPAM_SUBJECT_RULE 2.0
describe LOCAL_SPAM_SUBJECT_RULE Thi
Yes! I had already installed the same.
Thanks and Regards
Shyam
On 8/20/05, Sam Varshavchik <[EMAIL PROTECTED]> wrote:
> shyam s writes:
>
> > Dear Group.
> >
> > I am a newbie to courier.
> >
> > I was compiling courier-0.51.0, on RH9. I was properl
Dear Group.
I am a newbie to courier.
I was compiling courier-0.51.0, on RH9. I was properly configured and
also execute the make.
My problem is,when I type command make check it shows the following
error message.
<--error message->
make[1]: Entering directory `/home/shyam/work/courier-0
ks, they're going to
simply delete my email and go on with life.
-Brian
On Fri, July 22, 2005 18:21, Sam Varshavchik wrote:
> Brian S. Meehan writes:
>
>> Hey all,
>> I get the following message in my inbox when receiving HTML email. It
>
> You do not get the foll
Hey all,
I get the following message in my inbox when receiving HTML email. It
doesn't show me html mail at all. Some emails that used to show me HTML
emails now just have their message that says something to the effect of
"click the following link to read our email online since you can't see
html
On Mon, 23 May 2005 03:55:08 -0700
Bill Taroli <[EMAIL PROTECTED]> wrote:
> OK. I've finally reached a point where I *really* want FAM running on
> my Solaris 9 box, so that I can support ENHANCEDIDLE for IMAP... yes,
> even if FAM has to poll and there's no kernel module to help it.
>
> The conf
I realise that there have been posts about this in the past, but they were
some time ago. Has any progress been made on this or is there a fix?
I've recently set IMAP_EMPTYTRASH to 1, so that the Trash folder gets
cleared every week. I have also set IMAP_MOVE_EXPUNGE_TO_TRASH to 1 (see
below).
trieve *all* the messages *always*:
there are (not reproducible, afaik) cases in which some message was not
downloaded to the client, but was erased from server: we can see it by
activating "leave messages on server", and connecting later via an IMAP
reader (squirrelmail): some message/s r
er file? #!/bin/sh## Written 24Jan03 by Stephen S Kelley# last modified 24Jan03 SSK## this script delivers mail for addresses that have no specific accountsor aliases NEWADDR="" case $HOST in # rewrite [EMAIL PROTECTED] to [EMAIL PROTECTED] domain1) NEWADDR="[EMAIL PROTECTED]"
I’ve got a default dot-courier script to do some address rewriting so that I can have several domains associated with one user account. #!/bin/sh## Written 24Jan03 by Stephen S Kelley# last modified 24Jan03 SSK## this script delivers mail for addresses that have no specific accountsor
guess
reading the entire esmtproutes section in the man page would have been
smart... :)
--
Jacob S. Barrett
[EMAIL PROTECTED]
www.amduat.net
"I don't suffer from insanity, I enjoy every minute of it."
---
This SF.net e
hen it is supported. However, I'd really like to be
> able to email my mother (rather than incessantly passing messages
> through my father), but can not due to the above error.
Add a line like this to esmtproutes:
mrswashington2003.com:mail.mrswashington2003.com/SECURITY=NONE
This says
rs at multiple data centers. Since
that is still a ways out I haven't tested this in a lab environment yet with
Courier.
--
Jacob S. Barrett
[EMAIL PROTECTED]
www.amduat.net
"I don't suffer from insanity, I enjoy every minute of it."
---
me of virtual user in "spamc -u" parameter - how to
> do it?
import USER
exception {
xfilter "spamc -u $USER"
}
--
Jacob S. Barrett
[EMAIL PROTECTED]
www.amduat.net
"I don't suffer from insanity, I enjoy every minute of it."
-
site has hired an incompetent administrator". :)
--
Jacob S. Barrett
[EMAIL PROTECTED]
www.amduat.net
"I don't suffer from insanity, I enjoy every minute of it."
---
This SF.Net email sponsored by: Free pre-built ASP.
without calling STARTTLS. If there isn't a flag that does this,
can it be added to a wish list? For karma sake, it would be nice if it
would log the failed STARTTLS attempt so that one could contact the
postmaster of that domain and notify him.
Thanks,
Jake
--
Jacob S. Barrett
[EMAIL PROT
On Tue, Jun 24, 2003 at 08:15:26PM +0200, Thomas von Hassel wrote:
> Why would you add a footer to all your mails comming though the system ?
Corporate policy?
-roy
---
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consul
On Wed, Jun 11, 2003 at 09:50:18AM +0200, Patrick Thomas wrote:
> TELNET:
> * OK Courier-IMAP ready. Copyright 1998-2002 Double
> for distribution information.
> login [EMAIL PROTECTED] test
> login NO Error in IMAP command received by server.
>
>
> now my question, how can I debug this?
> Is co
I'm attempting to get Courier IMAP working on Solaris 9 with, initially,
just shadow access (authshadow) and eventually expanding to using
non-system users.
Having read the INSTALL.html and the docs linked to from it, I have to
admit that I still don't feel as though I know how to configure it.
Pe
Howdy ho,
In an attempt to resolve this issue I:
A) Attempted to make sure it was still there in the latest snapshot;
B) Read the FAQ; and
C) Attempted to search the mailing list archives with not great success
because sourceforge mailing list searches suck.
Having dispensed with the preamble,
Hi all,
I have configured courier mail server and its working
fine.
I want to know how to make all outgoing mail to be
cc'd to single account.This should to be automatic.
If anyone knows how to do this,please help me.
Cheers
prasad.s
__
Do you Yahoo!?
The N
support longer
passwords you'll need to use md5-hashed passwords.
I gotcha... I figured it out. All my passwords are passed through
crypt() using MD5 ($1$) now. Thanks for the help, it all works now.
--
Jacob S. Barrett
[EMAIL PROTECTED]
www.amduat.net
"I don't suffer from in
:
Jacob S. Barrett writes:
I have noticed that when logging into Courier IMAP that it ignores
password characters past 8. For example, if my password was
"123456789" I could login with "1234567890". Also, if my password was
"1234567890" I could login with "1
ot;123456789X". Is this normal
behavior? I searched around on Google and found nothing in previous
posts that suggest this is normal, but maybe I missed something.
Thanks,
Jake
--
Jacob S. Barrett
[EMAIL PROTECTED]
www.amduat.net
"I
op3d_login, pop3d_logout,
imapd_connection, imapd_login, imapd_logout,
smtpd_started, smtpd_error, smtpd_error_513, smtpd_error_550}
-Jake
Mark Constable wrote:
This just got the thumbs up from our staff who need to keep an
eye on mail flow. Might be useful to some others on this list.
Hi All,
I find this in my courier server once every minute or so:
Mar 13 01:17:37 mails courierd:
started,id=0002404B.3E187256.0291,from=<>,module=dsn,host=,addr=<[EMAIL PROTECTED]>
Mar 13 01:17:37 mails courierd: Waiting. shutdown time=none, wakeup time=Thu Mar 13
01:21:37 2003, queuedeli
courier-0.39.3.
--
Jacob S. Barrett
[EMAIL PROTECTED]
www.amduat.net
"I don't suffer from insanity, I enjoy every minute of it."
courier-0.40.2.tar.gz
Description: application/gzip
hey p'ple!
I've installed courier-imap on RH 8.0...Just for trial
purpose am testing it with sendmail...
So i Telnet 2 port 143..it aborted on its own..saying no maildirs
were made...
To make Maildirs..i tried command maildirmake ..its giving a
bash...
Now am stuck n donno how 2 proceed
On Thu, Feb 27, 2003 at 12:33:08PM -0500, David Mir wrote:
> Your exactly right (of course!) I have chosen "custom" ./Maildir (I am pretty
> sure this was the default). My questions is can I switch to Maildrop and not
> mess up everyone's email up? ie. does maildrop by default deliver in
> $HOM
Hello,
Trying to build courier-imap 1.7.0 on a RH 7.3 (plus updates) system.
When I try to start the build, I get the following error:
[ss@rigel ss]$ rpm -ta courier-imap-1.7.0.tar.bz2
error: failed build dependencies:
fam-devel is needed by courier-imap-1.7.0-1.7.3
postgresql
Look at the entry "sizelimit" in
http://www.courier-mta.org/courier.html. Make a file named "sizelimit"
in your courier etc directory with the size you want to change the
default.
Stephen S. Kelley, President
VirtuState, Inc.
[EMAIL PROTECTED]
http://www.virtustate.com
-
any mail to addresses which
don't have accounts or aliases to a specified account.
#!/bin/sh
#
# Writtine 24Jan03 by Stephen S Kelley
# last modified 24Jan03 SSK
#
# this script delivers mail for addresses that have no specific accounts
or aliases
# give sysad all mail not matching spe
1 - 100 of 150 matches
Mail list logo
