> I boot the board form flash using the root filesystem in hard disk.
And I
> unplug the network cable. In the course of the boot,
> 1 . Sending DHCP request, it will try two times and hold up several
minutes. How to skip the procedure.
You can skip the DHCP in the boot sequence, by setting the
and what is the appropriate way to set a static ip. I am booting using
cramfs, and I need a static address but i've found that the only way to
do that is setting ip= and
nfsroot=:/. even though root is set to
cramfs. I don't need the nfsroot line b/c nfs isn't used, its just the
only way i've found
to set static ip use something like this in the bootargs (one of the
.254 addresses is the gw - the other is the server which is not used)
ip=192.168.1.165:192.168.1.254:192.168.1.254:255.255.255.0:system_name:et
h0:off
regards,
ken
-Original Message-
From: [EMAIL PROTECTED]
To: davinc
If you don't need an NFS root file system, you can disable kernel IP
autoconfiguration altogether. Do 'make menuconfig' in your kernel source
tree, and go to Networking/Networking options, and remove support for
"IP: kernel level autoconfiguration"
Even with kernel level IP configuration disab
Hi,
I've been reading the spraah2.pdf (Building a Small Embedded Linux Kernel
Example) and am able to build my ramdisk.gz for use
on the DVEVM. Unfortunately, the document (or any other TI document I could
find) doesn't cover how to do something similar
for a JFFS2 image. I have read througho
This question is in regard to USB issues with Montavista Pro 4.01 kernel
and the Davinci 6446
On the device side I am using the musb_hdrc controller driver in USB
peripheral mode (DMA enabled). Also, I am using gadget zero as our
standardized test for the USB subsytem. This is unmodified code
Thanx for the info, this method works great.
nachum
Favorite Quote:
Mal: "Well, my days of not taking you seriously are certainly coming to
a middle..."
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 06, 2007 7:55 PM
To: Nachum Kanovsky; davinci
Hi all,
I created one Davinci QQ discussing group and expecting your participation.
Group number is 30456209.
Thank you!
Andy Ye
___
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://
output error
mv: cannot stat `/etc/motd': Input/output error
How to solve this problem.
Thanks.
-- next part --
An HTML attachment was scrubbed...
URL:
http://linux.omap.com/pipermail/davinci-linux-open-source/attachments/20070306/43fa94a4/attachment-0001.htm
-
anks.
-- next part --
An HTML attachment was scrubbed...
URL:
http://linux.omap.com/pipermail/davinci-linux-open-source/attachments/20070306/43fa94a4/attachment-0001.htm
--
Message: 2
Date: Tue, 6 Mar 2007 10:33:25 +0800
From: "Steve Yeh" <[E
10 matches
Mail list logo
