Dear all,
I'm using the DM355 EVM board with Montavista pro 4.0.1. I need to
enable the UART1 and UART2. I checked the old posts in the maillist and
found they are for DM644x board. The code between DM355 and DM644x is a
bit different. Would appreciate if you could guide on how to enable the
UARTs
BJ Opp wrote:
> Yes, here's a dump of the pertinent environment settings, as well as the
> dmesg output as promised. The weird thing is that after I get the 'link
> down' message the board seems to boot ok? What am i missing here?
>
> bootargs=mem=120M console=ttyS0,115200n8 ip=dhcp noinitrd r
Stephen Berry <[EMAIL PROTECTED]> wrote:Jeff, Brian wrote:
st1\:*{behavior:url(#default#ieooui) } Gstreamer for DaVinci
TMS320DM6446 is now available for free download, delivered under LGPL, for the
open source community.
BJ,
I went back and checked my DM6446 and DM355 and I noticed what you
mentioned below that on the DM355 you see the "link down" message but
that message does not appear on the DM6446. However, on my DM355 (and
it looks the same on yours according to the output below) I saw a DHCP
request and the
Yes, here's a dump of the pertinent environment settings, as well as the dmesg
output as promised. The weird thing is that after I get the 'link down'
message the board seems to boot ok? What am i missing here?
bootargs=mem=120M console=ttyS0,115200n8 ip=dhcp noinitrd rw ip=dhcp
root=/dev/nf
BJ,
Did you change the default bootargs variable in u-boot to use ip=dhcp
rather than ip=off?
Sincerely,
Chase Maupin
Software Applications
Catalog DSP Products
e-mail: [EMAIL PROTECTED]
phone: (281) 274-3285
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf O
On a somewhat different note regarding the DM355. Did you have to take
any special steps to get the onboard Ethernet working properly? We have
DM6446 boards that we used for development and have a project going with
them (and our own custom boards). Both are functioning without any
major issues
JAEHOON LEE wrote:
> Hi All.
>
> With helps by Dirk Behme, I got the messages like this.
>
>
> Linux version : Current GIT kernel
> UBoot version : Current GIT uboot
> Root File System : provided by DVEVM
>
>
> [When kernel boots, I got the messages.]
>
> serial8250.0: ttyS0 at MMIO 0x1c2000
Jeff, Brian wrote:
>
> Gstreamer for DaVinci TMS320DM6446 is now available for free download,
> delivered under LGPL, for the open source community.
>
>
>
> Several TI business units and engineering teams have been working with
> Gstreamer as a foundation for application demos and other project
>
Ilyssa Tzivia wrote:
> On Jan 19, 2008 10:29 AM, Stephen Berry <[EMAIL PROTECTED]> wrote:
>
> Stephen,
>
> Thanks for your help. I have some follow up questions.
>
>> - the TI webpage says "On-board Ethernet controller with application notes
>> and schematics". Does this mean the DM355 does not
Stephen Berry wrote:
> Jeff Cooper wrote:
>> Stephen Berry wrote:
>>> Jeff Cooper wrote:
>>>
Stephen,
Have you used a BDI2000 to flash the NAND on a DM355 EVM board? I was
under the impression that a BDI2000 could only write to NOR flash and
wouldn't work with the DM355
Hi,
I would appreciate any information regarding DCLKCTL and OSDCLK registers.
I have all the TI docs, but I'm still a little bit puzzled...
Thanks,
Valentina
-
Looking for last minute shopping deals? Find them fast with Yahoo! Search.___
12 matches
Mail list logo