Problem booting via NFS

Hello, I try to boot my davinci-board via nfs (I followed the instructions from c:\mvcyg4.0\opt\montavista\pro\documentation\docs\quickstart\cross-development\html\index.html) But the kernel doies not boot: TFTP from server 172.16.0.1; our IP address is 172.16.0.2 Filename

booting linux AND accessing DSP

Hello, I have read http://c6000.spectrumdigital.com/davincievm/revd/files/DaVinciEVM_FAQ.html#JTAG_Emulation_Setup but it is possible to boot linux on the arm side and to connect to the DSP with CCS and JTAG? Or do I have to write my dsp-program and flash the dsp always before booting into

Re: Problem booting via NFS

Am Fri, 25 Jan 2008 12:56:27 +0200 schrieb Caglar Akyuz: Looking up port of RPC 13/2 on 172.16.0.1 Looking up port of RPC 15/1 on 172.16.0.1 VFS: Mounted root (nfs filesystem). Please note that you're mounting your nfs successfully here. On your next post, after changing dhcp

Re: Problem booting via NFS

Robert W. Kuhn wrote: Am Fri, 25 Jan 2008 10:28:10 +0100 schrieb Robert W. Kuhn: And wehre could be the problem? [...] I think things are worse now. Looking up port of RPC 13/2 on 172.16.0.1 Root-NFS: Unable to get nfsd port number from server, using default Looking up port of

Re: Problem booting via NFS

Am Fri, 25 Jan 2008 13:12:43 +0100 schrieb Robert W. Kuhn: Most probably the board actually boots, but you can't _see_ nothing w/o the initial console... Now it works. The evm creates /dev/console on their own. The boot process hangs about 30 sec: VFS: Mounted root (nfs filesystem).

Re: DM355 with OpenOCD via Olimex JTAG

Yes, Be sure to put EMU0 and EMU1 switches next to the JTAG connector both on LOW. This scritps get you basic connectivity and debug capability. I haven't experimented a lot to get advanced features like DCC downloads. If you get something else I would appreciate if you share your

RE: booting linux AND accessing DSP

Hi Robert, This page may help if you are debugging a Codec-Engine-based application: http://wiki.davincidsp.com/index.php?title=Debugging_the_DSP_side_of_a_C E_application_on_DaVinci_using_CCS Best regards, Vincent -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On

RE: Problem booting via NFS

The montevista target tools are a loadable kernel module. You can easily remove the module from loading on startup in the startup scripts in /etc/rc.d/rc3.d Josh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Arie Muijnck Sent: Friday, January 25, 2008

DM355 with OpenOCD via Olimex JTAG

Hi folks, Has anyone gotten the DM355 evaluation board working with OpenOCD and Olimex's JTAG wiggler? If so, can I get your config script? Thanks, jayakumar ___ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com

Re: Unable to compile kernel (cfide_lbus_probe)

Am Thu, 24 Jan 2008 13:05:17 +0100 schrieb Robert W. Kuhn: How can I solve this? How can I re-install the kernel sources? I found cross-arm_v5t_le-lsp-ti-davinci_evm-2.6.10_mvl401-1.1.0.0600990.noarch.mvl on the Linux Support Packages arm_v5t_le-CD. But how can I de-install the sources in

RE: How to make CMEM cacheable on ARM side on DM6446?

Chris, Thanks for the detail you provided. They helped me understand better. Best Regards, Kumar -Original Message- From: Ring, Chris [mailto:[EMAIL PROTECTED] Sent: Thursday, January 24, 2008 11:28 PM To: Kumar Brajbhushan; davinci-linux-open-source@linux.davincidsp.com Subject: RE: