Hi,
Have to tried to play this H.264 encoded clip using VLC player?
Because i am able to decode H.264 clip encoded with TI's baseline
profile Encoder using ffmpeg.
Please confirm that your encoded clip is perfect using any standard
player like VLC.
--
Thanks & Regards,
Zuber Saiyed
Embedded
HI Venkat! I had tryed it.but it didn't work. thinks
在2009-02-04,"Venkatachala Upadhya" 写道:
Hi,
Try using ffmpeg software on Windows PC or Linux PC.
With best regards,
Venkat.
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[davinci-l
Hi,
Try using ffmpeg software on Windows PC or Linux PC.
With best regards,
Venkat.
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[davinci-linux-open-source-boun...@linux.davincidsp.com] On Behalf Of
baxkstreet [baxkstr...@163.com]
Sen
On Wed, Feb 4, 2009 at 11:01 AM, Nitin Mahajan wrote:
> HI!
>
> ___
> From: Deepak Mundra
> To: "davinci-linux-open-source@linux.davincidsp.com" <
> davinci-linux-open-source@linux.davincidsp.com>
> Sent: Tuesday, February 3, 2009 19:11:30
> Subject: u boot and frameb
HI all!
I am using TI's DM6446 evaluation board.I encoded a video with h264 codec
(TI demo)。unfortunately, i don't know how to decode it on PC .can somebody help?
___
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.c
HI!
___
From: Deepak Mundra
To: "davinci-linux-open-source@linux.davincidsp.com"
Sent: Tuesday, February 3, 2009 19:11:30
Subject: u boot and framebuffer interface
Dear All,
How can i open frame buffer in u-boot and display a white screen(or bmp
image).. What i w
HI!
I am using the LSP 2.00 Beta, i. e 2.6.18 kernel. If I place the rootfs on NAND
flash, how can I make it Read Only?
I know one way is through the 'bootargs', Isn't there a way through kernel
configuration?
regards
-Nitin
New Email names for you!
Get the Email name you've always
Jerry Johns writes:
>
>
>
>
>
> 1) To ensure that the *.mpeg4 file that the DM355 creates is
> good, try playing it back in VLC – yes, VLC can play back these files.
>
> 2) Also, you can use a program called YUVTools to inspect
> the YUV file that you created to ensure it’s in the proper UV
From: David Brownell
Subject: davinci_nand: clean up the A1CR hacks
The A1CR hacks aren't really needed on the DM355 EVM; NAND timings
set by UBL (or whatever) are a bit slower than needed, but that's
not too bad. Remove, but add a comment in board setup.
For the DM6446 EVM, the problem is how
Signed-off-by: David Brownell
Update NAND layout for the DM6446 EVM:
- Partition it more like the DVDSK kernel does ... no more
hidden 5 Mbyte partition before the filesystem data, the
boot areas are fully visible.
The GIT version of this driver previously started the
fil
1) To ensure that the *.mpeg4 file that the DM355 creates is good, try
playing it back in VLC - yes, VLC can play back these files.
2) Also, you can use a program called YUVTools to inspect the YUV file
that you created to ensure it's in the proper UVYV format that output
display requires.
3) Try
Dear All,
How can i open frame buffer in u-boot and display a white screen(or bmp
image).. What i want is ,After switching on board when u-boot executes i
want to display something on screen ie before executing the kernel.. If some
one has done this before please guide me through..
Thanks in Adv
From: jitendraj...@emerson.com
> 1. Boot system using SD card
> 2. On UBOOT_SD prompt, we are writing 512 Bytes of data (any value) to
> NAND (after erasing) using NAND driver hacked from "NAND Programmer"
> 3. After writing, we read back data
> 4. We can see that data and ECC are matching with the
Hi,
We are executing following steps:
1. Boot system using SD card
2. On UBOOT_SD prompt, we are writing 512 Bytes of data (any value) to
NAND (after erasing) using NAND driver hacked from "NAND Programmer"
3. After writing, we read back data
4. We can see that data and ECC are matching with the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
David Brownell wrote:
> On Monday 02 February 2009, Yusuf Caglar AKYUZ wrote:
>> Is it possible to use CF? I haven't seen any references to it. I'm
>> desperately searching for info on using CF. Let me ask while I found
>> the specialist.
>
> I was to
15 matches
Mail list logo