I get the DSP side traces ?
I want to debug the DSP side code. Can XDS510 Jtag emulator be used to get
the DSP side traces?
If yes, then how do I use this?
Can anyone please tell me how to make use of this?
Regards,
Suhas Jain
Associate
AFTEK Limited - Pune
Web: www.aftek.com
Mail
pplication require the CHNL component?
Regards,
Suhas Jain
-Original Message-
From: Kamoolkar, Mugdha [mailto:mug...@ti.com]
Sent: Thursday, March 26, 2009 7:32 PM
To: Suhas Jain; davinci-linux-open-source@linux.davincidsp.com
Subject: RE: Problem with decode demo application
Suhas,
file.
please help.
Regards,
Suhas Jain
-Original Message-
From: Kamoolkar, Mugdha [mailto:mug...@ti.com]
Sent: Friday, March 27, 2009 12:13 PM
To: suhas; davinci-linux-open-source@linux.davincidsp.com
Subject: RE: Problem with decode demo application
Suhas,
It just means that the GPP-side an
is not supported for OSD Window0.
Is there any other way by which I can implement this ping-pong logic for
OSDWIN0.
Can anybody help me out to get this issue resolved.
Regards,
Suhas Jain
___
Davinci-linux-open-source mailing list
Davinci
me out to get this issue resolved.
BTW what is "panning in the framebuffer driver"? Could this be used to solve
my issue?
Awaiting your reply.
Regards,
Suhas Jain
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Carl Renaud
Sent
d fixed my problem of display flicker with this setting. Hope
this works for you too.
Regards,
Suhas Jain
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Jerry Johns
Sent: Thursday, October 16, 2008 9:06 PM
To: davinci-linux-open-source@linux.davincidsp.com
Subject: Display
; davinci-linux-open-source@linux.davincidsp.com
Subject: Re: DM6446 1024x768 graphics with video overlay
suHas,
Could what you are seeing be related to Advisory 2.1.2 in sprz241k,
"Bus Priority Inversion Can Affect DDR2 Throughput"? I ran into this
problem and saw OSD0
want to have sharp image to be displayed as in Field mode but, would
require Frame mode for complete display. How could I achieve the same.
Regards,
Suhas Jain
Associate
AFTEK Limited - Pune
Web: www.aftek.com
Mail: [EMAIL PROTECTED
Hi All,
I am facing a strange problem.
I am using OSDWIN0 in RGB 565 mode as display window.
I have set the Frame Mode and Interlace is enabled.
It seems that displayed image has some flicker when used in Interlace mode.
Due to this image becomes unclear and seems blurred.
I have tried d
Has anybody looked into this post?
Please reply. its urgent !!!
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
suhas
Sent: Thursday, November 06, 2008 7:00 PM
To: davinci-linux-open-source@linux.davincidsp.com
Subject: Image on OSDWIN0 shakes when used in Interlace mode
Check if you have /dev/video0 node present in your rootfs
On Thu, 2009-02-19 at 15:55 +0900, kirthika varadarajan wrote:
> Hi,
> After including the resizer driver i am getting the following error
> Encodedecode demo started.
> Encodedecode Error: Cannot open /dev/video0 (No such file or
> dir
,
Suhas Jain
___
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
I got those files.
They are in sample files for dm355.
On Wed, 2009-03-25 at 13:22 +0530, Suhas Jain wrote:
> Hi All,
>
> I trying to run the decode demo on DM6446 EVM.
>
> Where can I find the samples files for running the demo applications?
> Sample files like
k is working fine with all sample
applications in dsplink folder (messagegpp, ringiogpp, etc...).
All these applications run fine, without any error.
What could be the possible reason for the problem with decode and other
demo applications?
Please help.
Regards,
Suhas Jain
_
Hi All,
I am using recently released DVSDK 3.10 on DM365 EVM board. Audio decoding
with this SDK consumes almost 95% ARM. Is there any fix to this issue?
Please help.
Thanks in advance
Suhas Jain
___
Davinci-linux-open-source mailing list
Davinci
Even I am facing a similar problem. I am using 2.6.32-rc2 kernel from Arago
project. I am using Libertas WIFI driver over SDIO interface. My device gets
associated to Access point but does not get an IP with DHCP. Rx. Packet
count increases but there are not packets being transmitted.
I don't kno
LSP2.10 to LSP3.10.
Has anybody already tried doing this porting before?
Please help.
Thanks in advance,
Suhas Jain
___
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo
functions.
How to make use of these?
-Original Message-
From: Nori, Sekhar [mailto:nsek...@ti.com]
Sent: 28 April 2010 18:44
To: Suhas Jain
Cc: davinci-linux-open-source@linux.davincidsp.com
Subject: RE: TVP5158 driver with DVSDK 3.10
Hi Suhas,
On Wed, Apr 28, 2010 at 12:39:00, Suhas Jain
Hi Chris,
You can find the complete setup for DM6446 EVM board at following link.
http://focus.ti.com/lit/ug/sprue66e/sprue66e.pdf
Regards,
Suhas Jain
-Original Message-
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[mailto:davinci-linux-open-source-boun
boot with
SD boot is to erase the NAND flash. Processor always enters NAND boot mode
if there is some bootable image existing on NAND flash irrespective of
BOOTCFG.
Please let me know what could be the possible reason for this. Your prompt
response would be highly appreciated.
Thanks,
Suhas Jain
Hi All,
We are getting a kernel panic in cppi_completion routine for musb.
We are using Davinci DM365 with PSP3.20. The board has a SMSC USB hub and we
have connected USB storage and USB modem on this hub. The observation during
kernel panic is: it seems like USB gets stalled and hence either the
21 matches
Mail list logo