On Behalf Of Phil Quiney [EMAIL
PROTECTED]
Sent: Tuesday, September 16, 2008 10:47 AM
To: Maupin, Chase; davinci-linux-open-source
Subject: RE: DM355 ethernet issue
Hi Chase,
I have resolved the problem ;-)
Basically switching to the busybox 'udhcpc' allows the board to start with
: Maupin, Chase; davinci-linux-open-source
Subject: RE: DM355 ethernet issue
Hi Chase,
I have resolved the problem ;-)
Basically switching to the busybox 'udhcpc' allows the board to start with the
cable removed.
It isn't a simple change to get it to work as the 'default' de
1223-435536
F: +44(0)1223-435560
www.trinityconvergence.com <http://www.trinityconvergence.com/>
From: Maupin, Chase [mailto:[EMAIL PROTECTED]
Sent: 12 September 2008 15:59
To: Phil Quiney; davinci-linux-open-source
Subject: RE: DM355 ethernet issue
Phil
Phil Quiney, Senior Software Engineer
Trinity Convergence
Cambridge Business Park
Cowley Road
Cambridge CB4 0WZ, UK
T: +44(0)1223-435536
F: +44(0)1223-435560
www.trinityconvergence.com <http://www.trinityconvergence.com/>
From: Maupin, Chase [mailto:[EMAIL
Phil,
If you do not need the ethernet then you can set ip=off on the bootargs. If
not then you can enable ethernet after boot I believe by doing
"/etc/init.d/network restart". If you want to boot with ethernet enabled but
no cable you can try removing the ethernet startup scripts to prevent t