a loadable module but in use its only flickering on any window redraw.
--
mit freundlichem Gruss -- regards
Thomas Drillich
Heugasse 4 / D-55116 Mainz / Germany
fon +49 (0)6131 570 26 21
fax +49 (0)180 506 033 437 443
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
cause your display runs slow.
if you don't have a correct kernel module.
--
mit freundlichem Gruss -- regards
Thomas Drillich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
, the graphics card? Anything
to watch out for --- are there sleep problems with Nvidia/ATI?
On ati-devices only the vesa driver runs fine
-- follow the tread http://ati.cchtml.com/show_bug.cgi?id=253
--
mit freundlichem Gruss -- regards
Thomas Drillich
--
To UNSUBSCRIBE, email to [EMAIL
Thomas Drillich
Heugasse 4 / D-55116 Mainz / Germany
fon +49 (0)6131 570 26 21
fax +49 (0)180 506 033 437 443
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hello,
I'm running a shuttle xpc st 20g5, with an ATI Radeon Xpress 200 on board
graphics. But when I use the ati driver (8.22.5) it turns the dvi port off,
and on every window redraw the desktop flickers horizontally.
I do not have those problems with the std vesa driver.
Do you had similar
Hi,
I have a running st20g5 with debian etch:
-- you have to install debian on ide disk -- cause sata_uli is not inside
kernel
-- kernel params noapic acpi=off
-- setup sata raid on in bios
-- if you like you could get a special debian package with kernel 2.6.15 with
sata_uli
should be finished in december, and there amd64 should be one of the standard
supported systems.
--
mit freundlichem Gruss -- regards
Thomas Drillich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
from alsa-project.org shall support
the realtech alc880 chipset.
btw. the answer I got from shuttle support was approximately translated :
Do not use such exotic chipsets like ati or nvidia on linux, use intel ;-))
--
mit freundlichem Gruss -- regards
Thomas Drillich
Heugasse 4 / D-55116 Mainz
Hello,
debian runs on that machine but suboptimal, here are some notes I send
to the manufacturer support:
sata support: sata_uli
If the raid switch is turned off in the bios, the linux kernel module
sata_uli detects the hard disc only after a second load. Only if the
bios switch for
be independend from
libpcre.
grep version 2.5.1.ds2-3
libpcre version 6.4-1
--
mit freundlichem Gruss -- regards
Thomas Drillich
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
about problems with sata_uli, especially with the
shuttle xpc st20g5.
--
mit freundlichem Gruss -- regards
Thomas Drillich
Heugasse 4 / D-55116 Mainz / Germany
fon +49 (0)6131 570 26 21
fax +49 (0)180 506 033 437 443
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
11 matches
Mail list logo