Igor TAmara wrote:
Is it safe to try to use hdparm ? to disable dma on the conf?
It is relatively safe to backup the data, then replace the cables. If
that fixes the problem, run at least software RAID1 --- if not, return
the disk(s) and run at least software RAID1. If that doesn't help
On Wed, May 03, 2006 at 06:43:53PM -0500, Igor TAmara wrote:
I removed from the bios, and also passed dma=off , at least it lets me
boot on 2.6.15, was not able to do that before.
But it still shows errors, is it possible that the bad use of the dma
would damage the disk? I just but the hd
Hi,
Paul
Paul Have you tried with out DMA
Paul
I removed from the bios, and also passed dma=off , at least it lets me
boot on 2.6.15, was not able to do that before.
But it still shows errors, is it possible that the bad use of the dma
would damage the disk? I just but the hd about 4 months
Hi, I replaced the cable for a new one, and the error persists :( , the
model of the hd is HD5728080PLAT20 ATA/IDE is a Hitachi Deskstar, it
says 7200 rpm MLC BA111 6 CHS: 16383/16/63
And the jumpers are as 0 Master, in a number that says 16
Other configurations available on the hd with jumpers
From: Igor TAmara [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 02, 2006 5:16 PM
Hi, I replaced the cable for a new one, and the error
persists :( , the model of the hd is HD5728080PLAT20 ATA/IDE
is a Hitachi Deskstar, it says 7200 rpm MLC BA111 6 CHS: 16383/16/63
[...]
Does it have
Have you tried with out DMA
Paul niranjan
From: Igor TAmara [EMAIL PROTECTED]
To: debian-amd64@lists.debian.org
Subject: Re: hard disk fails? / mounted read-only
Date: Tue, 2 May 2006 10:15:45 -0500
MIME-Version: 1.0
Received: from murphy.debian.org ([146.82.138.6]) by
bay0-mc12-f8.bay0
Sorry for not removing the headers while replying
Paul niranjan
Have you tried with out DMA
Paul niranjan
Hi, I replaced the cable for a new one, and the error persists :( , the
model of the hd is HD5728080PLAT20 ATA/IDE is a Hitachi Deskstar, it
says 7200 rpm MLC BA111 6 CHS:
Hi,
Erik On Tue, Apr 25, 2006 at 05:53:04PM -0500, Igor TAmara wrote:
Erik On Deb 2.6.12 I seen on dmesg lines like :
Erik
Erik hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
Erik hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
Erik
Erik BadCRC means cable errors. Make
On Tue, Apr 25, 2006 at 05:53:04PM -0500, Igor TAmara wrote:
On Deb 2.6.12 I seen on dmesg lines like :
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
BadCRC means cable errors. Make sure you're using an 80 pin cable and
Hi, I don't know if my hd is failing or it has something to see with the
drivers of my mainboard, a summary is the following
Debian Etch K 2.6.12-1 : Mounts read only / shows some errors (/dev/hda7)
Debian Etch K 2.6.15-1 : Does not mount / , due to errors (/dev/hda7)
Ubuntu BreezK 2.6.12-9 :
I had this happen
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
turned out to be bad connections
Igor TAmara wrote:
Hi, I don't know if my hd is failing or it has something to see with the
drivers of my mainboard, a summary is the following
Debian Etch K 2.6.12-1 : Mounts
11 matches
Mail list logo