As I nearly daily test the sid_d-i images, I will start here reporting
about its OK/KO status on my system.
These reports will be always made in VmWare, 96Mb RAM, 1Gb HD.
They are focused on detecting some nasty things happening on the most
common installation scheme (all defaults) as well a
Quoting Franz Amador ([EMAIL PROTECTED]):
Thanks for the reply. I figured out what happened.
The Debian installer changed the partition number of
my XP partition, I think by changing it from a primary
partition to a logical partition.
After a lot of Googling, I learned that the NT boot
On Sun, Jun 13, 2004 at 11:23:59PM -0500, Steve Langasek wrote:
On Fri, Jun 11, 2004 at 03:56:56PM +0200, maximilian attems wrote:
Debian-installer-version: alpha daily build
http://cdimage.debian.org/pub/cdimage-testing/daily/alpha/20040610/
uname -a:
Date: 11. june 2004 ~13h
Method:
Your message dated Mon, 14 Jun 2004 07:01:22 +0200
with message-id [EMAIL PROTECTED]
and subject line Bug#254027: installation-reports TC1 on Acer TravelMate 800
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not
Your message dated Mon, 14 Jun 2004 07:21:55 +0200
with message-id [EMAIL PROTECTED]
and subject line Bug#254200: d-i tc1 success plus some notes
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is
Does this mean that Install/Bug reports about amd64 installations should
be sent to debian-boot or debian-amd64 or both ?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Quoting Steve Langasek ([EMAIL PROTECTED]):
I've submitted an updated patch to bug #252956 which now uses dlopen()
to load the fribidi routines. This means, once the patch is applied, we
will immediately have opportunistic bidi text support in debconf *and*
d-i!
But, will this patch be
Quoting sylvain ferriol ([EMAIL PROTECTED]):
it's because os-prober depends on xfs, ext3, reiserfs,...
but even in lowmem mode, i don't want to play with dependencies. so if a
module depends on others, d-i will load them.
but now we can check if dependencies for all udebs are 'really'
Hello Christian,
On Sat, Jun 12, 2004 at 07:59:25PM +0200, Christian Perrier wrote:
Dennis, you should definitely recruit Helge in the german translator
team, as (s)he seems to have very careful proofreading..:-)
He. Helga is the female, and Helge is the male form. And proofreading
is *much*
On Sat, Jun 12, 2004 at 22:21 +0200, Thorsten Schaefer wrote:
In the meantime I've downloaded the daily installer beta from June
1st and the testcandidate 1 and with that the network card works fine during
the complete
installation phase.
Oh? So you didn't have the DHCP problem when you used
On Sun, Jun 13, 2004 at 02:43:29PM +0100, Martin Michlmayr wrote:
* Patrick Caulfield [EMAIL PROTECTED] [2004-06-11 17:25]:
There was an odd bug in earlier lvm2 that used to cause checksum
failures but I can't locate which version that was and I assume that
you'll be using a fairly recent
* Patrick Caulfield [EMAIL PROTECTED] [2004-06-14 09:17]:
http://people.debian.org/~patrick/lvm2-udeb_2.00.16-2_i386.udeb
daveg2: After network configuration in debian-installer, open a shell
on the 2nd virtual console (alt-f2) and then type:
wget
Processing commands for [EMAIL PROTECTED]:
severity 252588 grave
Bug#252588: install: Installation fails on Sparc Ultra 10
Severity set to `grave'.
reassign 252588 debian-cd
Bug#252588: install: Installation fails on Sparc Ultra 10
Bug reassigned from package `debian-installer' to `debian-cd'.
On Wed, Jun 09, 2004 at 08:53:07PM +0100, Martin Michlmayr wrote:
I think daily floppy images are available at
http://people.debian.org/~joeyh/d-i/installer-i386/current/images/ but
I'm not sure everything you'll need is there.
Who would know for sure? I'm willing to do some
Package: base-config
Version: 2.21
Severity: wishlist
It would be useful to add a special suffix to the executable
files in /usr/lib/base-config/menu which will be considered
as menu entries.
For example we could have:
mta.cfg mta.mnu mta.tst
and then change the code in prep-menu accordingly:
Package: debian-installer
Severity: important
When creating a software raid device, after it finishes syncing the main
menu does not return and it just sits there.
If you kill the installer menu process when it restarts it goes to
Setting up the partitioner and freezes at 55%, when you reboot
Processing commands for [EMAIL PROTECTED]:
reassign 254313 mdcfg
Bug#254313: debian-installer: Software-raid creation and sync fails to return to main
menu
Bug reassigned from package `debian-installer' to `mdcfg'.
thanks
Stopping processing here.
Please contact me if you need assistance.
reassign 254313 mdcfg
thanks
* Trent 'Lathiat' Lloyd [EMAIL PROTECTED] [2004-06-14 17:19]:
If you kill the installer menu process when it restarts it goes to
Setting up the partitioner and freezes at 55%, when you reboot you can't
When it hangs at 55%, can you please open a shell on the 2nd
hello vorlon!
On Sun, 13 Jun 2004, Steve Langasek wrote:
On Fri, Jun 11, 2004 at 03:56:56PM +0200, maximilian attems wrote:
1) the daily build didn't let me choose my keyboard at
DEBCONF_PRIORITY=medium after the coutry selection.
had an english keyboard (same as language) but needed
ROSEN Jeremy [EMAIL PROTECTED] writes:
Does this mean that Install/Bug reports about amd64 installations
should be sent to debian-boot or debian-amd64 or both ?
That depends. Probably best to send them to debian-amd64. We can still
forward them if its not an amd64 problem.
MfG
Goswin
On Sun, Jun 13, 2004 at 02:49:26PM +0100, Martin Michlmayr wrote:
* Charles Steinkuehler [EMAIL PROTECTED] [2004-06-11 14:45]:
I'm pretty handy with shell scripting, and could probably come up with a
fix to the grub stuff (espeically with the nice auto-detect stuff in
mkinitrd already
Hey, my name is jen and I'm new to this online dating thing.
I've just my profile up, you should come check it out it's interesting.
I just want to get to know you a little better if you don't mind, come check my
profile out at:
www.starjen.com/cam.html
I also got a videocam so we can make it
Hello, I have a special offer for you...
WANT TO LOSE WEIGHT?
The most powerful weightloss is now available
without prescription. All natural Adipren720
100% Money Back Guarantée!
- Lose up to 19% Total Body Weight.
- Up to 300% more Weight Loss while dieting.
- Loss of 20-35% abdominal Fat.
-
Quoting Helge Kreutzmann ([EMAIL PROTECTED]):
Let's ring Seppy...
If I can forward all things found in d-i directly to seppy in the
future, that would be great.
Well, there is no good answer to this.
The best is probably forwarding them to
[EMAIL PROTECTED] which all german translators
i386 test only
2.4 fr+FR : OK
2.6 fr+FR : OK
2.4 en+US : OK
2.6 en+US : OK
All of these have the missing lines around dialog boxes bug in 2nd
stage, however.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Your message dated Mon, 14 Jun 2004 08:47:14 -0400
with message-id [EMAIL PROTECTED]
and subject line Bug#250299: fixed in libdebian-installer 0.27
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it
Your message dated Mon, 14 Jun 2004 08:47:14 -0400
with message-id [EMAIL PROTECTED]
and subject line Bug#250299: fixed in libdebian-installer 0.27
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it
Debian Bug Tracking System,
I got it. thanks for your reply.
=== 2004-06-14 04:33:26 ===
This is an automatic notification regarding your Bug report
#240644: Debian installer b3 can't display correct chinese char after reboot during
installation.,
which was filed against
Looks like Arash began working on Farsi translation of d-i...
(Farsi, sometimes called Persian, is the official language in Iran)
- Forwarded message from Cron Daemon [EMAIL PROTECTED] -
From: Cron Daemon [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Cron [EMAIL PROTECTED] cd
s390-dasd_0.0.6_s390.changes uploaded successfully to localhost
along with the files:
s390-dasd_0.0.6.dsc
s390-dasd_0.0.6.tar.gz
s390-dasd_0.0.6_s390.udeb
Greetings,
Your Debian queue daemon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
On Mon, Jun 14, 2004 at 09:47:59AM +0200, Christian Perrier wrote:
Quoting Steve Langasek ([EMAIL PROTECTED]):
I've submitted an updated patch to bug #252956 which now uses dlopen()
to load the fribidi routines. This means, once the patch is applied, we
will immediately have opportunistic
Processing commands for [EMAIL PROTECTED]:
tags 254073 pending
Bug#254073: tc1 fail on hppa
Tags were: d-i
Tags added: pending
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--
To
E-MAIL ADDRESS INACTIVE
The Advisor Media address you wrote to is inactive. For
more reliable communication, we now use a Web system.
To reach Advisor customer service, Advisor live events,
Advisor editors, Advisor advertising sales, or other people or
departments, please use the Web form at
tags 254073 pending
thanks
On Sun, Jun 13, 2004 at 02:39:51PM -0600, Grant Grundler wrote:
On Sun, Jun 13, 2004 at 12:41:47PM -0400, Kyle McMartin wrote:
The best thing to do, would be to always install 32bit by default.
No. The best would be to look at uname -m output.
Install 32-bit if
Its 8086:24cd .
Thanks.
On Fri, 2004-06-11 at 17:54, Joey Hess wrote:
Scott M. Dier wrote:
The installer didn't load ehci-hcd for this machine under a CD boot
where it did under a USB boot (!?). I've got no idea (yet) how modules
are called before the ISO is mounted, so I'm assigning
Taken from a recent (Jun 2004) installer snapshot:
Debian does not currently support using software RAID for the root
filesystem of /boot partition. A system installed in this way will
not boot.
Nice fix :-)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Accepted:
s390-dasd_0.0.6.dsc
to pool/main/s/s390-dasd/s390-dasd_0.0.6.dsc
s390-dasd_0.0.6.tar.gz
to pool/main/s/s390-dasd/s390-dasd_0.0.6.tar.gz
s390-dasd_0.0.6_s390.udeb
to pool/main/s/s390-dasd/s390-dasd_0.0.6_s390.udeb
Announcing to [EMAIL PROTECTED]
Thank you for your contribution to
libdebian-installer_0.27_s390.changes uploaded successfully to localhost
along with the files:
libdebian-installer_0.27.dsc
libdebian-installer_0.27.tar.gz
libdebian-installer4_0.27_s390.deb
libdebian-installer4-dev_0.27_s390.deb
libdebian-installer4-udeb_0.27_s390.udeb
Accepted:
libdebian-installer-extra4-udeb_0.27_s390.udeb
to pool/main/libd/libdebian-installer/libdebian-installer-extra4-udeb_0.27_s390.udeb
libdebian-installer-extra4_0.27_s390.deb
to pool/main/libd/libdebian-installer/libdebian-installer-extra4_0.27_s390.deb
Hello, I have a special offer for you...
WANT TO LOSE WEIGHT?
The most powerful weightloss is now available
without prescription. All natural Adipren720
100% Money Back Guarantée!
- Lose up to 19% Total Body Weight.
- Up to 300% more Weight Loss while dieting.
- Loss of 20-35% abdominal Fat.
-
[ debian-boot people: This is a lilo problem with in an install on a HP
Smart Array RAID controller ]
Hi Mikael
Please don't answer to me privately. Always answer to
[EMAIL PROTECTED] instead. It's more likely you will get an
answer there because others might well know the solution to your
Hi,
I don't know what to do in dash shell. I run the installation of
DebianLinux 3.0 from cd. I chose the default boot type. Than I saw Debian
Installer Main Menu. I did the first 5 points with no problem. The last
one (the 6th one) is to Execute shell. But know I don't know how to
continue
I have an HP Proliant ML350 G3 with HP Smart Array SCSI controller. At
first
I couldn't install due to the drivers of HP Smart Array missing, but
Gaudenz
Steinlin helped me out a little guiding me to the installer at:
On Mon, 2004-06-14 at 10:09, Alessandro Foresi wrote:
Taken from a recent (Jun 2004) installer snapshot:
Debian does not currently support using software RAID for the root
filesystem of /boot partition. A system installed in this way will
not boot.
Nice fix :-)
I ran into this as well.
Tod Hagan wrote:
Install did not load the needed ataraid and medley modules, required
manual installation of the modules from shell:
Could you send your lspci -n output, please?
Install of base system fails when installing kernel-image-2.4.26 with
this error message:
/usr/sbin/mkinitrd:
Your message dated Mon, 14 Jun 2004 11:47:04 -0400
with message-id [EMAIL PROTECTED]
and subject line Bug#254073: fixed in base-installer 0.084
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is
Package: installation-reports
Debian-installer-version: 5
June,http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-netinst.iso
uname -a: The result of running uname -a on a shell prompt
Date: 5/6 June, 2004
Method: Boot from CD
Machine: Fujitsu-Siemens Amilo A7620,
base-installer_0.084_powerpc.changes uploaded successfully to localhost
along with the files:
base-installer_0.084.dsc
base-installer_0.084.tar.gz
base-installer_0.084_powerpc.udeb
Greetings,
Your Debian queue daemon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Package: installation-reports
Debian-installer-version: 11 Jun 2004,
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-netinst.iso
uname -a: Linux hakone 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 GNU/Linux
Date: 11 Jun 2004
Method: CD with Debian-base on it, then
On Mon, Jun 14, 2004 at 11:44:27AM -0400, Joey Hess wrote:
Could you send your lspci -n output, please?
(using KNOPPIX_V3.4-2004-05-17-EN)
:00:00.0 Class 0600: 10de:01e0 (rev c1)
:00:00.1 Class 0500: 10de:01eb (rev c1)
:00:00.2 Class 0500: 10de:01ee (rev c1)
:00:00.3 Class 0500:
Free Ekanayaka wrote:
This way it would be easier for other packages to customise base-config. For
example a package could provide a custom mta.cfg diverting the original file
to mta.cfg.distrib, and prep-menu will not include the .distrib file in the
menu.
Not that I'm opposed to your idea,
libdebian-installer_0.26.really.0.22_i386.changes uploaded successfully to localhost
along with the files:
libdebian-installer_0.26.really.0.22.dsc
libdebian-installer_0.26.really.0.22.tar.gz
libdebian-installer4_0.26.really.0.22_i386.deb
libdebian-installer4-dev_0.26.really.0.22_i386.deb
Accepted:
base-installer_0.084.dsc
to pool/main/b/base-installer/base-installer_0.084.dsc
base-installer_0.084.tar.gz
to pool/main/b/base-installer/base-installer_0.084.tar.gz
base-installer_0.084_powerpc.udeb
to pool/main/b/base-installer/base-installer_0.084_powerpc.udeb
Announcing to
libdebian-installer_0.28_i386.changes uploaded successfully to localhost
along with the files:
libdebian-installer_0.28.dsc
libdebian-installer_0.28.tar.gz
libdebian-installer4_0.28_i386.deb
libdebian-installer4-dev_0.28_i386.deb
libdebian-installer4-udeb_0.28_i386.udeb
Rejected: libdebian-installer4_0.26.really.0.22_i386.deb: old version
(0.25.really.0.22) in unstable = new version (0.26.really.0.22) targeted at
testing-proposed-updates.
Rejected: libdebian-installer4-dev_0.26.really.0.22_i386.deb: old version
(0.25.really.0.22) in unstable = new version
Accepted:
libdebian-installer-extra4-udeb_0.28_i386.udeb
to pool/main/libd/libdebian-installer/libdebian-installer-extra4-udeb_0.28_i386.udeb
libdebian-installer-extra4_0.28_i386.deb
to pool/main/libd/libdebian-installer/libdebian-installer-extra4_0.28_i386.deb
It looks like we have to throw out tc1 as not good enough for release.
The release critical problems include:
- some broken m68k images (unknown mke2fs fix needed)
- broken sparc64 module loading (fix: busybox-cvs 20040415-3)
- messed up line drawing characters in base-config (fix: base-config
Quoting Steve Langasek ([EMAIL PROTECTED]):
Alastair has already uploaded -3, it's sitting in the NEW queue on
ftp-master right now. It's being blocked at my request, because it
OK, I forgot the package is maintained by Alastair (seems to me that
the name on the bug page is different...maybe
On Monday 14 June 2004 17:55, mp wrote:
The installation never starts. It hangs at 93% of Detecting hardware to
find CD-ROM drives with the subtitle: Starting PC Card Services.
This looks like a known problem with some laptop models.
Please try starting the installer with 'linux
* mp [EMAIL PROTECTED] [2004-06-14 16:55]:
The installation never starts. It hangs at 93% of Detecting
hardware to find CD-ROM drives with the subtitle: Starting PC Card
Services.
Can you please pass the hw-detect/start_pcmcia=false option when
booting and say if that works.
--
Martin
I'll be away for a week after Tuesday. I hope some of these issues are
resolved when I get back so that we can begin getting a tc2 ready. In
the meantime, tbm and kamion have the ability to get fixed udebs into
testing. Since tc1 is a lost cause, there's no reason not to start with
getting
Quoting Christian Perrier ([EMAIL PROTECTED]):
IMHO, it's worth it as it definitely solves the invalid locales
problems when choosing unsupported combinations such as English in
Brazil.
But, well, I would perfectly understand if this is delayed because of
potential unknown implications (such
Debian Bug Tracking System wrote:
This is an automatic notification regarding your Bug report
#254167: High-ASCII characters do not display properly after 2nd reboot with kernel 2.6,
which was filed against the base-config package.
It has been closed by one of the developers, namely
Processing commands for [EMAIL PROTECTED]:
package grub
Ignoring bugs not assigned to: grub
retitle 243532 Misspelling in Swedish grub translation
Bug#243532: Error in the Swedish translation
Changed Bug title.
reassign 243532 debian-installer
Bug#243532: Misspelling in Swedish grub
On Mon, Jun 14, 2004 at 08:18:26PM +0200, Christian Perrier wrote:
I'll be away for a week after Tuesday. I hope some of these issues are
resolved when I get back so that we can begin getting a tc2 ready. In
the meantime, tbm and kamion have the ability to get fixed udebs into
testing.
Package: installation-reports
Debian-installer-version: Test Candidate 1
uname -a: Linux (none) 2.6.5-1-386
Date: 06/13/2004 12:50 PM
Method: Boot on the external IBM USB CDROM Drive
Machine: IBM ThinkPad X23
Processor: Pentium !!!-m 866
Memory: 384Mo SoDimm memory
Root Device:
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
reassign 253910 discover1-data
Bug#253910: cd install not working on dell latitude x300
Bug reassigned from package `hw-detect' to `discover1-data'.
End of message, stopping
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
tags 253798 d-i
Bug#253798: debian-installer: Driver for SATA SIL should be added
There were no tags set.
Tags added: d-i
reassign 253798 discover1-data
Bug#253798:
Processing commands for [EMAIL PROTECTED]:
# Automatically generated email from bts, devscripts version 2.7.95.1
tags 254286 d-i
Bug#254286: installation-reports: two issues with debian-installer Test Candidate 1
There were no tags set.
Tags added: d-i
clone 254286 -1
Bug#254286:
Your message dated Mon, 14 Jun 2004 16:09:50 -0400
with message-id [EMAIL PROTECTED]
and subject line closing
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen
On Mon, Jun 14, 2004 at 08:39:39PM +0200, Olivier ROLAND wrote:
Christian Perrier wrote:
This problem is not there on the latest sid_d-i build. With the 2.6
install, everything is OK on the french install=A0: I can type =E9 at
the command line and they are properly outputted
Hence, closing
Yeah, I use:
808624cdusb echi-hcd82801DB USB EHCI
Controller
here in our local copy of discover1-data. I'm actually sort of
surprised its not in there, Bug #191440 pointed to the skolelinux list
updates that included this one.
* Use the HW info from the
Scott M. Dier wrote:
Its 8086:24cd .
That one is present in usb-discover, but not in discover1-data. This
doesn't quite explain why it worked with one boot method and not the
other, since both boot methods have usb-discover on the initrd.
Something must be going on that I'm not thinking of.
Your message dated Mon, 14 Jun 2004 22:09:38 +0200
with message-id [EMAIL PROTECTED]
and subject line does not load yenta_socket module
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your
Processing commands for [EMAIL PROTECTED]:
retitle 242959 Unable to load driver for some USB bridges
Bug#242959: FW: Package: discover1-data
Changed Bug title.
tags 242959 + pending
Bug#242959: Unable to load driver for some USB bridges
Tags were: moreinfo
Tags added: pending
tags 242959 -
Processing commands for [EMAIL PROTECTED]:
merge 228158 253915
Bug#228158: DI installation report for Dell Latitude CPi 366A
Bug#253915: does not load yenta_socket module
Mismatch - only Bugs in same state can be merged:
Values for `done mark' don't match:
#228158 has `open';
#253915 has
Quoting Steve Langasek ([EMAIL PROTECTED]):
In the tests I've done with the new languagechooser, almost all of the
entries are displayed in English, and there doesn't seem to be a short
list provided by countrychooser. This seems like a significant
regression for the common case; I think
Package: base-config
Version: 2.23
Debian version: Debian Installer (testcandidate 1, also various daily builds
of beta 4 versions)
As requested in bug #248627 I created a bug report for this issue:
When I select german during the installation process and reboot during the
base-config and then
Scott M. Dier wrote:
Yeah, I use:
808624cdusb echi-hcd82801DB USB EHCI
Controller
here in our local copy of discover1-data. I'm actually sort of
surprised its not in there, Bug #191440 pointed to the skolelinux list
updates that included this one.
* Use
Your message dated Mon, 14 Jun 2004 22:27:27 +0200
with message-id [EMAIL PROTECTED]
and subject line DI installation report for Dell Latitude CPi 366A
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case
Processing commands for [EMAIL PROTECTED]:
tags 253798 + pending
Bug#253798: debian-installer: Driver for SATA SIL should be added
Tags were: d-i
Tags added: pending
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
Quoting Olivier ROLAND ([EMAIL PROTECTED]):
I'm sorry but I can reproduce this bug with the last daily built CD
image (13-Jun-2004).
First boot is ok, second boot no. I have check all and confirm that
bug on my system.
Any clue for deeper investigation ? Is there someone else
Processing commands for [EMAIL PROTECTED]:
retitle 253910 Should load ehci-hcd for 82801DB (ICH4) USB2 EHCI Controller
Bug#253910: cd install not working on dell latitude x300
Changed Bug title.
tags 253910 + pending
Bug#253910: Should load ehci-hcd for 82801DB (ICH4) USB2 EHCI Controller
Processing commands for [EMAIL PROTECTED]:
retitle 254451 Should load ataraid/medley for Silicon Image Serial ATARaid
Controller [ CMD/Sil 3112/3112A ]
Bug#254451: installation-reports: two issues with debian-installer Test Candidate 1
Changed Bug title.
tags 254451 + pending
Bug#254451:
Package: installation-reports
Debian-installer-version: testcandidate 1
http://www.debian.org/devel/debian-installer
Date: 14.6.2004 8:00 pm CET
Method: CD-Image (110 MB, i386 version)
Machine: Compaq Armada 3500
Processor:Pentium II - 366 MHz
Base System Installation Checklist:
Initial boot
retitle 253910 Should load ehci-hcd for 82801DB (ICH4) USB2 EHCI Controller
tags 253910 + pending
thanks
The current entry in CVS looks like this:
808624cd unknown unknown 82801DB (ICH4) USB2 EHCI Controller
I changed it to this one:
808624cd usb ehci-hcd 82801DB (ICH4) USB2 EHCI
Microsoft Outlook Express 5.00.2314.1300
Content-Type: multipart/mixed;
boundary==_Part_16154_2108336.1505088853101
--=_Part_16154_2108336.1505088853101
Content-Type: text/plain;
charset=iso-8859-2
Content-Transfer-Encoding: quoted-printable
Send me back bro, when you`ll
Processing commands for [EMAIL PROTECTED]:
tags 253442 + pending
Bug#253442: needs to load ataraid and pdcraid for fasttrack ide-raid controller
There were no tags set.
Bug#253496: discover1-data not detecting ataraid pdcraid
Tags added: pending
thanks
Stopping processing here.
Please contact
tags 253442 + pending
thanks
I didn't see any reply, so I'm guessing on one of the. I selected
ataraid. The fix is in CVS.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Mon, Jun 14, 2004 at 09:51:51PM +1000, Andrew Pollock wrote:
On Sun, Jun 13, 2004 at 02:49:26PM +0100, Martin Michlmayr wrote:
* Charles Steinkuehler [EMAIL PROTECTED] [2004-06-11 14:45]:
I'm pretty handy with shell scripting, and could probably come up with a
fix to the grub stuff
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 14 June 2004 22:32, Christian Perrier wrote:
Quoting Steve Langasek ([EMAIL PROTECTED]):
In the tests I've done with the new languagechooser, almost all of the
entries are displayed in English, and there doesn't seem to be a short
Apal wrote:
Comments/Problems: External USB CDROM Drives aren't detected, and on
some machine, (e.g. IBM ultraportables notebooks, the X20/X30/X40
families, and subnotebooks, like Sony Vaio C1) don't have built-in CDROM
Drive. USB Floppy is the only way, when we can't have a docking station
Processing commands for [EMAIL PROTECTED]:
tags 250530 + l10n
Bug#250530: nl_NL install: accented characters not shown correctly
There were no tags set.
Tags added: l10n
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
tags 250530 + l10n
thanks
I think the basic problem has been fixed now, but I still see some encoding
problems in the full country list in countrychooser (after choosing 'other'):
- most continents and countries are shown correctly
- two continents with accents are _not_ shown correctly:
-
Oh? So you didn't have the DHCP problem when you used tc1?
No, it worked just fine now.
1. When I select german during the installation process and reboot
during
the base-config and then complete the configuration after the
machine is up
again, the rest of the base-config runs in english.
I've found one additional thing when doing a testinstallation some
minutes ago. When the base-config is completed (in german for example)
and no reboot is done and then base-config is started again manually
it will run in english and not in the selected language.
Thorsten
--
To UNSUBSCRIBE,
Processing commands for [EMAIL PROTECTED]:
reassign 202160 busybox-cvs
Bug#202160: should not include /linuxrc
Warning: Unknown package 'busybox-cvs-net-udeb'
Bug reassigned from package `busybox-cvs-net-udeb' to `busybox-cvs'.
--
Stopping processing here.
Please contact me if you need
On Mon, 2004-06-14 at 18:49, Martin Michlmayr wrote:
* mp [EMAIL PROTECTED] [2004-06-14 16:55]:
The installation never starts. It hangs at 93% of Detecting
hardware to find CD-ROM drives with the subtitle: Starting PC Card
Services.
Can you please pass the hw-detect/start_pcmcia=false
On Mon, Jun 14, 2004 at 23:57 +0200, Thorsten Schaefer wrote:
No some are but several are not solved. Dennis updated this bug report
on May 28th, 2004 01:18:44 mentioning that they are fixed in SVN/CVS
but did not yet get into d-i.
And this seems still to be the case.
Here are more details:
Hi all,
Repies: please CC me, I'm not subscribed to the list.
Hardware: NEC Versa VX laptop (year 2000)
Processor: Pentium III 450MHz
Memory: 192M
* No onboard network card *
Summary:
Installation was successful using the default choices, both with beta4
and tc1. But without a network card,
1 - 100 of 108 matches
Mail list logo
