Quoting Steve Langasek ([EMAIL PROTECTED]):
Just to confirm, there are a fair number of translations available for
languagechooser, and the reason for the full countrychooser list was
that I was testing Arabic, which doesn't have a shortlist yet. :)
Which I currently do not understand really.
If eacute is replaced by its Unicode notation U+00E9 in keymap
file, everything works fine now. But this keymap cannot be used
when keyboard is in ASCII mode, The only solution is to have two
keymaps, one for ASCII mode and the other one for UTF-8 mode.
OK, thanks a lot Denis for this
Hmmm, I'm unable to reproduce this bug. Could you send the
/var/lib/dpkg/info/base-config.templates file to the bug log (if you
suspect your MUA may alter its encoding, please gzip it before sending
it)?
Which debconf interface do you use (I guess this is of no importance
but just want to check
Package: base-config
Version: 2.31
Severity: normal
When using the netinst CD, the HTTP or FTP proxy is never prompted to the
user, even at low priority.
Thus, when apt-config comes for, for instance getting the security updates,
no proxy is setup and if one is needed for reaching the outside
On Montag, 21. Juni 2004 18:40, Martin Michlmayr wrote:
* Matthias Murra [EMAIL PROTECTED] [2004-06-21 17:17]:
It's certainly not lvm's fault if the installer screwed up a bit,
so yes, this bug probably can be closed -- or reassigned to the
So what exactly did the installer do? From what I
I've not had a play with the installer for some time (to my shame) but I wonder
if it's at all possible to notice that a disk that was allocated to LVM
(pvcreated) has now been allocated to a filesystem. In which case a pvremove
could be done on the volume.
This maybe totally impractical, of
On Tue, Jun 22, 2004 at 12:36:47AM +0200, [EMAIL PROTECTED] wrote:
On Monday 21 June 2004 23:48, Martin Hasch wrote:
Debian installation CD #1 booted without trouble into the
installer menu. However, I could not assign the root filesystem
where I wanted it, though both disks and their
Christian Perrier [EMAIL PROTECTED] writes:
Unfortunately, something seems to have broken recently, and
the currently generated access floppy images do not boot anymore.
The boot floppy starts to load normally, and after some time, SYSLINUX reports:
Boot failed: Please change disks and press
On Sun, Jun 20, 2004 at 10:03:36PM +0200, Bastian Blank wrote:
What needs to be done:
- Installer-Item changes (anna/choose-mirror/net-retriever).
Commited, needs uploads (anna pending).
- Testing (rootskel and network-console).
- Proper implementation of di-utils-exit-installer (special exit
Matt Kraai [EMAIL PROTECTED] writes:
On Mon, Jun 21, 2004 at 06:06:34PM +, Goswin von Brederlow wrote:
Package: anna
Version: 0.064
Severity: serious
Justification: stops to build from source
The package changelog doesn't seem to match the one in the
repository. Is it from a special
On (22/06/04 11:42), Shri Shrikumar wrote:
Hi All,
I have a quick question - one of the servers that I manage have a
problem in that /var/log/syslog and /var/log/daemon.log get filled up
with a message from bind and subsequently bounces all mail since there
is no space left.
What is the
anna_0.065_s390.changes uploaded successfully to localhost
along with the files:
anna_0.065.dsc
anna_0.065.tar.gz
load-installer_0.065_all.udeb
anna_0.065_s390.udeb
Greetings,
Your Debian queue daemon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Your message dated Tue, 22 Jun 2004 13:04:19 +0200
with message-id [EMAIL PROTECTED]
and subject line Bug#255544: FTBFS: undefined references
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
On Tue, Jun 22, 2004 at 12:47:11PM +0200, Bastian Blank wrote:
- debootstrap needs to install ssh or something needs to forcible
install it via apt-install. The key and the installer user password
needs to be copied to the target and ssh should not build another key
which will result in
Accepted:
anna_0.065.dsc
to pool/main/a/anna/anna_0.065.dsc
anna_0.065.tar.gz
to pool/main/a/anna/anna_0.065.tar.gz
anna_0.065_s390.udeb
to pool/main/a/anna/anna_0.065_s390.udeb
load-installer_0.065_all.udeb
to pool/main/a/anna/load-installer_0.065_all.udeb
Announcing to [EMAIL PROTECTED]
* Patrick Caulfield [EMAIL PROTECTED] [2004-06-22 09:14]:
I've not had a play with the installer for some time (to my shame) but I wonder
if it's at all possible to notice that a disk that was allocated to LVM
(pvcreated) has now been allocated to a filesystem. In which case a pvremove
could
Processing commands for [EMAIL PROTECTED]:
clone 255439 -1
Bug#255439: d-i report
Bug 255439 cloned as bug 255689.
retitle -1 Wrong driver chosen for ATI Technologies Inc Radeon Mobility U1
Bug#255689: d-i report
Changed Bug title.
reassign -1 xserver-xfree86
Bug#255689: Wrong driver chosen
Quoting Christian Perrier ([EMAIL PROTECTED]):
Which I currently do not understand really. I suspect this is because
all countries that are likely to be displayed in this short list do
not have their name translated in Arabic but I'm unsure
No, this is because countrychooser does not have
clone 255439 -1
retitle -1 Wrong driver chosen for ATI Technologies Inc Radeon Mobility U1
reassign -1 xserver-xfree86
thanks
* Cristian Escalante [EMAIL PROTECTED] [2004-06-21 23:22]:
- Detect the wrong vga card (apm instead of ati);
Can you send your /var/log/XFree86.0.log file please.
Thank you for your mail Martin.
Unfortunatly the xfree logs are gone because I already have restarted
the xserver several times since then.
But, as far as it seems that they would be useful and just to be sure about
my aswers to your others questions I went through the installation
process
* Cristian Escalante [EMAIL PROTECTED] [2004-06-21 23:22]:
- Configure /etc/network/inerfaces and you are online;
Was that not done automatically?
nop
I am sure it detected the NIC correctly because in lsmod the netsami
module shoewd up (tty2 just after the first rebooting).
Can you
On Tue, Jun 22, 2004 at 01:46:53PM +0100, Martin Michlmayr wrote:
* Patrick Caulfield [EMAIL PROTECTED] [2004-06-22 09:14]:
I've not had a play with the installer for some time (to my shame) but I wonder
if it's at all possible to notice that a disk that was allocated to LVM
(pvcreated) has
Hello,
I tried to install with the following image:
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-netinst.iso
Also tried to install with the image generated with the following jigdo
updated at 20Jun2004:
Hello
I have just dist-upgraded my freshly essencial woody installation to
unstable. But modconf doesn't seem to work with kernel 2.6.7 (compiled
from kernel.org) giving the error:
FATAL: Failed to open config file /etc/modprobe.conf: No such file or
directory
I have removed /etc/modprobe.conf
Package: discover1
Version: 1.6.1
Severity: minor
Tags: sid
Hi,
discover said the es1371 module doesnt exist and is supposed to be built
in the kernel.
With 2.4.26 (as well as 2.6.x) and alsa the module name is snd-ens1371 instead.
---
Regards
- Jean-Luc
-- Package-specific
Installer fails to boot, kernel panic.
Hardware:
motherboard: Micro Star MS-6163, Slot 1
processor: 350 MHz Pentium 2
memory: 128 MB + 64 MB + 32 MB PC100 SDRAM (Non ECC)
hard disk: Maxtor Diamondmax 9+ 30 GB
network controller: 3com 3C905C
graphics: Matrox Millenium G100 (AGP)
cd-rom: Generic
Christian Perrier wrote:
Folks, just decide whether there should be a space or not and I'll
change this (I'm very good for these boring half-technical/no-coding
thingslet's save your valuable time:-))
Well, this message is kind of old, but isn't there a unicode ellipsis
character? Perhaps
On Tue, Jun 22, 2004 at 07:12:27AM +0200, Christian Perrier wrote:
Quoting Denis Barbier ([EMAIL PROTECTED]):
But generated locales differ because different encodings are passed to
localedef:
$ LANG=fr_FR locale charmap
ISO-8859-1
$ [EMAIL PROTECTED] locale charmap
also sprach Joe Drew [EMAIL PROTECTED] [2004.06.22.1736 +0200]:
Folks, just decide whether there should be a space or not and
I'll change this (I'm very good for these boring
half-technical/no-coding thingslet's save your valuable
time:-))
Well, this message is kind of old, but
linux-kernel-di-ia64_0.54_ia64.changes uploaded successfully to localhost
along with the files:
linux-kernel-di-ia64_0.54.dsc
linux-kernel-di-ia64_0.54.tar.gz
kernel-image-2.4.26-itanium-smp-di_0.54_ia64.udeb
nic-modules-2.4.26-itanium-smp-di_0.54_ia64.udeb
(new) brltty-modules-2.4.26-itanium-smp-di_0.54_ia64.udeb extra debian-installer
Braille support
This package contains Braille drivers for the Linux kernel.
(new) cdrom-core-modules-2.4.26-itanium-smp-di_0.54_ia64.udeb standard debian-installer
CDROM support
This package contains core CDROM
Processing commands for [EMAIL PROTECTED]:
tags 255187 pending
Bug#255187: Please add resolvconf support
There were no tags set.
Tags added: pending
End of message, stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
(administrator,
Processing commands for [EMAIL PROTECTED]:
tags 255651 patch
Bug#255651: base-config: apt-config should ask for proxy if not configured
There were no tags set.
Tags added: patch
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system
Processing commands for [EMAIL PROTECTED]:
tags 243543 confirmed
Bug#243543: Should fail gracefully in absence of network
There were no tags set.
Tags added: confirmed
End of message, stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
Quoting Francesco P. Lovergine ([EMAIL PROTECTED]):
On Tue, Jun 22, 2004 at 08:40:13AM +0200, Christian Perrier wrote:
Hmmm, I'm unable to reproduce this bug. Could you send the
/var/lib/dpkg/info/base-config.templates file to the bug log (if you
suspect your MUA may alter its encoding,
Quoting Steve Langasek ([EMAIL PROTECTED]):
Even though there are different locale variants available for historical
reasons, I think there is no reason we need to support more than one
variant for each locale in new installs. So a simple mapping list in
countrychooser should be sufficient.
Quoting Andre Felipe Machado ([EMAIL PROTECTED]):
Hello,
I tried to install with the following image:
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-netinst.iso
Could you try with
tags 255651 patch
thanks
The attached patch should allow apt-setup asking about a proxy is no
proxy has been setup yet.
This patch is *untested*.
627a628,635
# Ask about a proxy if no proxy is yet defined.
if [ -z $http_proxy ]; then
if [
On Tue, Jun 22, 2004 at 06:14:47PM +0200, Christian Perrier wrote:
The attached patch should allow apt-setup asking about a proxy is no
proxy has been setup yet.
This patch is *untested*.
The patch has no context, so will break as soon as lines are added above
that point in that file; 'diff
I suggest that if there are no interfaces then we make it so that
get_interface() doesn't exit but returns with the interface name
pointer equal to NULL. This is detected in main() and causes
get_nonet() to be called, on receiving an error from which the next
state becomes BACKUP; otherwise QUIT.
Quoting Colin Watson ([EMAIL PROTECTED]):
On Tue, Jun 22, 2004 at 06:14:47PM +0200, Christian Perrier wrote:
The attached patch should allow apt-setup asking about a proxy is no
proxy has been setup yet.
This patch is *untested*.
The patch has no context, so will break as soon as
Hi,
I would like to help you translate the debian-installer to hebrew.
I never translated any software before but I know C/C++.
If you can refer me to a decent guide or just explain me I would be glad
to start working on it.
Thanks,
Ben.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello all,
I've just submitted a bug against xserver-xfree86 because I have seen the
following problem on two separate installs and there were two independent
reports on [EMAIL PROTECTED]
The problem seems to be that X does not allow enough time
The latest module-init-tools eliminates use of /etc/modprobe.conf .
See the changelog.
--
Thomas Hood
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Tue, Jun 22, 2004 at 06:07:57PM +0200, Christian Perrier wrote:
Quoting Francesco P. Lovergine ([EMAIL PROTECTED]):
On Tue, Jun 22, 2004 at 08:40:13AM +0200, Christian Perrier wrote:
Hmmm, I'm unable to reproduce this bug. Could you send the
/var/lib/dpkg/info/base-config.templates
Processing commands for [EMAIL PROTECTED]:
reassign 255597 partman
Bug#255597: Installation Target on Second IDE Drive
Bug reassigned from package `installation-reports' to `partman'.
retitle 255597 Identical disk layout results in identical id's
Bug#255597: Installation Target on Second IDE
reassign 255597 partman
retitle 255597 Identical disk layout results in identical id's
severity important
thanks
This install had two identical disks with identical partitioning. The partman
log included by the user shows that corresponding partitions on both disks
get assigned identical ID's
Package: discover1
Severity: wishlist
Tags: l10n, d-i, patch
Here atached debconf template translation update for basque.
Plese commit when you can.
thx
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Processing commands for [EMAIL PROTECTED]:
severity 255597 important
Bug#255597: Identical disk layout results in identical id's
Severity set to `important'.
thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
(administrator,
Processing commands for [EMAIL PROTECTED]:
merge 255597 241785
Bug#241785: On two identical IDE disk with equal number of partitions assigning mount
point of a partition on the second disk assignes a mount point on the first instead.
However afterwards the partition on the second disk can be
merge 255597 241785
thanks
Just noticed this problem has been encountered before: 241785/246909.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
I've tried to learn the system much enough to figure out this
stuff by myself, but it's unfortunately difficult to even understand
which the normal order of run of the packages/ is, I would appreciate
some introductary developer/bugfixer documentation.
When grub is to be installed, it livelocks,
Hi,
After reporting bug, I felt at a loss since I had hard time making
a small simple modification to the ISO image.
I did some research and summarized it as:
http://people.debian.org/~osamu/hackdi
Hacking the debian-installer ISO image
Abstract
This document intends to provide a simple
Hi,
Now this patch should be even better.
On Sat, Jun 19, 2004 at 10:15:14AM +1000, Vincent McIntyre wrote:
thanks for that careful analysis, Osamu.
I have very similar hardware and it appears the problem may also be
avoidable by configuring the kernel to not use DMA on cdroms.
See bugs
Hi Andre,
I may be wrong. But I have a similar problem. My setup is: Gigabyte 8I875
with
hda: Maxtor 6Y160PO 160GB PATA disk
hdc: HL-DL-ST GSA-4081B DVD-RAM drive
hdd: Yamaha CRW-F1E CD-R/RW drive
If the machine is warm, frequently only LG drive has a trouble.
BIOS
That problem was caused by an error in 32MB memory chip, only some bytes were bad,
anything can happen.. :/
On 22.6.2004 at 18:53 Juhani Pirttilahti wrote:
Installer fails to boot, kernel panic.
Hardware:
motherboard: Micro Star MS-6163, Slot 1
processor: 350 MHz Pentium 2
memory: 128 MB + 64
Christian Perrier wrote:
Yes. It seems that I misunderstood completely the build
system..:-). Thanks for not being too sarcastic with my evident
stupidity, Colin..:-)
Indeed, after Colin pointed me to installer/build/daily-build, I just
launched that script and went gardening for a few
On Tue, Jun 22, 2004 at 12:42:25PM +0200, Goswin von Brederlow wrote:
Matt Kraai [EMAIL PROTECTED] writes:
On Mon, Jun 21, 2004 at 06:06:34PM +, Goswin von Brederlow wrote:
Package: anna
Version: 0.064
Severity: serious
Justification: stops to build from source
The package
Package: debian-installer
Version: http://people.debian.org/~bubulle/d-i/images/2004-06-22/floppy/
After I accidentally chose the wrong network driver (natsemi
instead of ne), the system displayed
Segmentation fault
at the bottom of the screen and the installer restarted. The
lowmem dialog
No-go on that one either. I used the 21 June image. In expert mode, it
said something about needing an IDE to RAID adapter driver or something
like that.
Here's a link to the Promise driver source I mentioned earlier:
I am really saddened to see that this happened.
I have been an active Debian user for several years. Although I have not
contributed directly to Debian, but I admire Debian's ideal, and have
been pushing Debian relentlessly in my own company, my custormers, and
friends. I also made a Chinese
A build of the Debian Installer Manual was triggered by an update to SVN.
There were no errors during the build process.
The new version of the manual has been uploaded successfully.
A full log of the build is available on request.
===
If you would prefer this message to be send somewhere else,
Hi,
I believe I need to burn all 4 .iso files in 1 cd,
right?
I have only access to windows now and what software do I use
to make that? I have NERO and I can't burn all 4 iso into 1 cd.
I have a SPARCstation 10 UP with 64MB memory.
I have tried:
http://june.voxel.net/~joshk/d-i/images/2004-06-23/sparc32/floppy/
and
http://june.voxel.net/~joshk/d-i/images/2004-06-01/sparc32/floppy/
and
http://june.voxel.net/~joshk/d-i/images/2004-05-14/sparc32/floppy/
Those images, all come up
Package: installation-reports
Debian-installer-version: Sarge Test Candidate 1, June 8, 2004, from
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-netinst.iso
uname -a: Linux sol 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686
GNU/Linux
Date: June 8, 2004, 9:40pm
65 matches
Mail list logo