Hi guys,
This bug seems more problematic than what is shown here.
I have two computers running Debian/Sid with libneon27-gnutls. One is a
64bit and the other is a 32bit. Both of them run version 0.29.0-1 of
libneon27-gnutls.
With the 32bit, here is the message I receive when committing :
deletes the
single-request line every time ...
Didrik
--
Didrik Pinte - Gérant/Manager
Dipole Consulting SPRL
E-mail : dpi...@dipole-consulting.com
Tel: +32 (0)10 77 90 05
Mobile : +32 (0)475 665 668
Fax: +32 (0)2 791 56 61
Web: http://www.dipole-consulting.com
TVA
you know in any case.
Didrik
--
Didrik Pinte - Gérant/Manager
Dipole Consulting SPRL
E-mail : dpi...@dipole-consulting.com
Tel: +32 (0)10 779 005
Mobile : +32 (0)475 665 668
Fax: +32 (0)2 791 56 61
Web: http://www.dipole-consulting.com
TVA: BE.0895.560.517
--
To UNSUBSCRIBE
the 2.9.10 version that
everything seems working fine !
Thanks
Didrik
--
Didrik Pinte - Gérant/Manager
Dipole Consulting SPRL
E-mail : dpi...@dipole-consulting.com
Tel: +32 (0)10 779 005
Mobile : +32 (0)475 665 668
Fax: +32 (0)2 791 56 61
Web: http://www.dipole-consulting.com
TVA
On Sun, 2009-05-03 at 13:24 +0200, Julien Cristau wrote:
retitle 430818 X reports 0x0 physical screen size
tag 430818 moreinfo
kthxbye
(X isn't technically reporting any dpi value; it's reporting dimensions
in pixels and in millimeters)
Didrik, to investigate this, we'll need the full X
Package: cups
Version: 1.3.10-1
Severity: normal
Hi guys,
changing the ip of my printer, I had to reinstall it. It is a HP OfficeJet Pro
L7590 that did work fine. Reinstalling was done by removing the old printer
from cups and install a new printer from the HPIJS toolbox.
Since the reinstall, I
Same problem here.
I solved it by appending the following line to svnlook.php :
set_include_path(get_include_path() . PATH_SEPARATOR.
'/usr/share/php-geshi');
Then everything works (coloring and displaying).
Didrik
signature.asc
Description: This is a digitally signed message part
On Wed, 2009-02-25 at 13:25 +0100, Francesco P. Lovergine wrote:
Good catch. I would presume that it is a nice swig-related issue due to the
new glibc.
Did you try to rebuild swig stuff from scratch? What arch are you using?
Hi Francesco,
The system is an amd64 architecture.
I have
Hi,
I have the very same problem here with a HP OfficeJet PRo 7500 that was
running fine before the latest cups updates
For me it seems everything is printed in a raw version. Even when
launching a Print Test Page from the cups web interface.
Didrik
--
Didrik Pinte - Gérant/Manager
Dipole
Package: proj
Version: 4.6.1-1
Severity: normal
Hi,
I do not know if it is the right place to report this problem but ...
Thus, since last glibc update (glibc (2.9-2) unstable; urgency=low), Thuban
seems to have problem using extension linked to proj.
See the stacktrace here below :
***
the debian installer ;-)
Please update the e1000e driver in lenny !
Thanks
--
Didrik Pinte - Gérant/Manager
Dipole Consulting SPRL
E-mail : dpi...@dipole-consulting.com
Tel: +32 (0)10 77 90 05
Mobile : +32 (0)475 665 668
Fax: +32 (0)2 791 56 61
Web: http://www.dipole-consulting.com
TVA
I have tested the ubutun 8.10 live cd and the ethernet interface just
works fine.
Didrik
--
Didrik Pinte - Gérant/Manager
Dipole Consulting SPRL
E-mail : dpi...@dipole-consulting.com
Tel: +32 (0)10 779 005
Mobile : +32 (0)475 665 668
Fax: +32 (0)2 791 56 61
Web: http://www.dipole
Package: mysql-server
Version: 5.0.67-1
Severity: normal
Hi,
I've made safe-upgrade this morning. mysql-server was upgraded to version
5.0.67. After the upgrade (that seems to ran fine), I cannot start the mysql
service anymore :
Hi Norbert,
You're right. Commenting line 107 in /etc/mysql/my.cnf solved the
problem .
I did not thing about looking if the bug could be related to another
package than mysql-server.
--
Didrik Pinte - Gérant/Manager
Dipole Consulting SPRL
E-mail : [EMAIL PROTECTED]
Tel: +32 (0)10 77 90
Package: linux-image-2.6.26-1-686
Version: 2.6.26-4
Followup-For: Bug #494036
Just to add another report. I have the same erratic freezes on my Thinkpad T60
with 2.6.25 and 2.6.26. I hope this is the same problem as reported in this bug
report but I have nothing to confirm it.
At the moment, I
,
everything goes quicker. The calendar is usable ...
Hope this could help solve this annoying problem.
--
Didrik Pinte - Gérant/Manager
Dipole Consulting SPRL
E-mail : [EMAIL PROTECTED]
Tel: +32 (0)10 77 90 05
Mobile : +32 (0)475 665 668
Fax: +32 (0)2 791 56 61
Web: http://www.dipole
Package: tinyerp-server
Version: 4.2.2-1
Severity: normal
Hi,
When trying to update or install modules in tinyerp, there is an error.
The fix is pretty simple. The tinyerp-server service is launched by the terp
user but the /usr/share/tinyerp-server/addons belongs to root. Changing the
Hi,
I was trying to make another installation of tinyerp-server using
postgresql 8.2 that is still available in lenny but the dependencies of
the package does not allow me to do it.
This how I have proceeded :
1) aptitude install postgresql-8.2
2) aptitude install tinyerp-server
-- it suggest
Package: tinyerp-server
Version: 4.2.2-1
Severity: important
Hi,
Sorry to report a known problem but I think it's important.
Using postgresql 8.3, you get the following erro while installing a new
database :
ProgrammingError: ERROR: function pg_catalog.substring(date, integer, integer)
Package: python-gdal
Version: 1.5.1-2+b1
Severity: normal
Hi
After the python 2.5 migration as default python interpreter in sid, it seems
that 2.4 gdal support is broken even if packaged using python-central.
Here is the output of a 2.4 session trying to load gdal :
[EMAIL
Package: thuban
Version: 1.2.0-2.1
Severity: normal
While updating my debian/sid, I add the following error :
Setting up python (2.5.2-1) ...
running python rtupdate hooks for python2.5...
Updating *.pc symlinks for python-gst0.10...
WARNING: compile error while trying to byte-compile
... seems it works now.
Don't know what happened exactly. I will close the bug. Sorry for the
noise but the behaviour was really strange.
Didrik
signature.asc
Description: This is a digitally signed message part
Hi,
I've attached the error.log of Apache. I hope this will help to debug
the problem. I can provide a text file if needed.
Cheers,
Didrik
[Fri Feb 08 17:02:39 2008] [notice] Apache/2.2.8 (Debian) PHP/5.2.5-2
with Suhosin-Patch configured -- resuming normal operations
[Fri Feb 08 17:02:51
Package: cgi-mapserver
Version: 5.0.2-1
Severity: normal
Hi,
I don't really know if it is EPSG:27572 related but using the same
configuration file but only changing the requested projection makes everything
crashes ...
I will post the Apache2 error log after the bug is created.
It seems
Package: firmware-iwlwifi
Version: 0.9
Severity: normal
Hi,
I don't know if it's the right place to report it but ...
When waking up from suspend to disk, the iwl3945 module is broken. Here is the
output of dmesg :
iwl3945: Microcode SW error detected. Restarting 0x8208.
iwl3945: Error
On Thu, 2008-01-03 at 16:49 +0100, maximilian attems wrote:
known trouble, install lastest 2.6.24-rc5 linux-images from trunk
snapshots see apt lines wiki.debian.org/DebianKernel
enjoy
Thanks for the quick answer. I'll dot that ;-)
Cheers and happy new year !
Didrik
signature.asc
On Sun, 2007-12-16 at 19:00 +0100, Michael Biebl wrote:
could you please install the tracker-dbg package and gdb.
Run gdb /usr/bin/trackerd and inside gdb
run -s 0 -v 2
When the segfault occurs, produce a backtrace with bt full
Please send me the output.
In addition you could run
Hi Michael,
Here is the output of the debug call :
[...]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb7937b90 (LWP 13932)]
do_save_ondisk_email_message_for_imap (db_con=0xb6109340,
mail_msg=0xb6063f10)
at tracker-email-evolution.c:2283
2283
Package: firmware-iwlwifi
Severity: normal
Hi,
Running an ipw3945 card in my laptop, I had problems since sometime to make it
work. The old ipw3945 module did not work anymore, so I tried to use the new
iwlwifi driver coming with 2.6.23 and the firmware-iwlwifi.
Because this does not conflict
On Tue, 2007-12-11 at 22:05 +0100, Michael Biebl wrote:
Didrik Pinte schrieb:
Package: tracker-search-tool
Version: 0.6.3-1
Severity: normal
Hi,
Because the behaviour has changed, I thought it was interesting to report
it.
I have trackerd runnging fine and indexing my two
Hi,
I made some investigation. The problem is that the personnal
configuration file stored in ~/.terprc contains the following :
[path]
pixmaps = /usr/lib/tinyerp-client
share = /usr/lib/tinyerp-client
Thus, because of the update, pixmaps are not at the same place.
Simply deleting the
Hi,
The problem in the ~/.terprc file was not alone.
The new default path is not the correct one :
In /usr/lib/tinyerp-client/options.py :
'path.pixmaps': os.path.join(sys.prefix,
'share/pixmaps/tinyerp-client/'),
but the file are in /usr/share/pixmaps ...
Either we should correct
And the new traceback is the following :
[EMAIL PROTECTED]:~$ tinyerp-client
Traceback (most recent call last):
File ./tinyerp-client.py, line 106, in ?
for fname in os.listdir(pix_file):
OSError: [Errno 2] No such file or directory:
'/usr/share/tinyerp-client/icons'
Thus, there are some
Hi,
Changing the following option in /usr/lib/tinyerp-client/options.py
solved the problem :
'path.pixmaps': os.path.join(sys.prefix, 'share/'),
All the icons,etc. seems to be accessible using the path /usr/share.
Didrik
signature.asc
Description: This is a digitally signed message part
When connecting, I try to change the database and got the following
error :
[EMAIL PROTECTED]:~$ tinyerp-client
Traceback (most recent call last):
File /usr/lib/tinyerp-client/modules/gui/main.py, line 694, in
sig_login
res = l.run(dbname=dbname, parent=self.window)
File
Package: tinyerp-client
Version: 4.2.0-1
Severity: normal
Since update to 4.2.0-1, I cannot start the tinyerp-client anymore.
The following error is raised (sorry for the bad alignment):
[EMAIL PROTECTED]:~$ tinyerp-client
Traceback (most recent call last):
File ./tinyerp-client.py,
Package: php5-mapscript
Version: 5.0.0-2
Severity: normal
Tags: patch
Hi,
The postinst script contains a small error.
Here is the error message :
Setting up php5-mapscript (5.0.0-2) ...
/var/lib/dpkg/info/php5-mapscript.postinst: line 18: [: missing `]'
A bit more information,
i launched the reindexing by hand with the following command :
[EMAIL PROTECTED]:~$ trackerd --reindex -v 3
I had lot of outputs but the last line is :
Segmentation fault
without any more information about the sefgault ...
Is there a way to debug this ?
Didrik
Package: tracker-search-tool
Version: 0.6.3-1
Severity: normal
Hi,
Because the behaviour has changed, I thought it was interesting to report it.
I have trackerd runnging fine and indexing my two Evolution imap email
accounts. Since last upgrade of trackerd, it seems everything is correctly
Package: libopal-2.2
Version: 2.2.8~dfsg1-2
Severity: normal
Hi,
I'm trying to compile libopal-2.2 package from the official repositories.
Here is the procedure used :
[1] apt-get source libopal-2.2
[2] cd opal-2.2.8~dfsg1/
[3] dpkg-buildpackage -rfakeroot
The package cannot be build and
On Wed, 2007-08-08 at 22:40 +0200, Markus Neteler wrote:
Hi Didrik,
oh - the --q in my patch should have been -q.
Attached the revised patch. Due to failing of v.info
the rest also fails (say, the new trick fails to
work around the indicated problem).
Let me know,
Markus
Hi Markus,
something else ? I'll be offline during the next three days.
Cheers,
Didrik
--
Didrik Pinte [EMAIL PROTECTED]
Information Technologies for the Agro-Environment
signature.asc
Description: This is a digitally signed message part
Package: grass
Version: 6.2.2-1
Severity: normal
Hi,
I'm not sure if it has to be forwarded upstream or not but I have the following
issue since 6.2.2 update :
this line does not work anymore :
v.db.update map=base_cells column=pprivate value=area_new * b_pump_priva /
b_area_tot
giving the
Package: sqlfairy
Version: 0.08-1
Severity: normal
Tags: patch
Hi,
When using the following command :
[EMAIL PROTECTED]:~/db$ sqlt-diagram --from=MySQL -o test.png
--natural-join db_prod_scheme_14072007.sql
Error: translate: Error with producer 'SQL::Translator::Producer::Diagram':
Can't
Package: python-tables
Version: 1.3.2-2
Severity: wishlist
Tags: patch
Hi,
I've made an update of the actual package to 2.0rc2 version. The package seems
to work fine. It's available on mentors.debian.net :
http://mentors.debian.net/debian/pool/main/p/pytables
Didrik
-- System Information:
Package: crossvc
Version: 1.5.1-1
Severity: grave
Justification: renders package unusable
Hi,
I'm trying to run crossvc under Sid. When launching the application, it just
outputs a Floating point exception :
[EMAIL PROTECTED]:~$ crossvc
Floating point exception
When launched with valgrind,
millimeters)
resolution:-2147483648x-2147483648 dots per inch
Resolution seems a bit weird ... I'm investigating.
Didrik
--
Didrik Pinte [EMAIL PROTECTED]
Information Technologies for the Agro-Environment
signature.asc
Description: This is a digitally signed message part
... in fact all the application linked with qt seems broken :
ddp:/home/did# VirtualBox
Floating point exception
ddp:/home/did# skype
Floating point exception
ddp:/home/did# crossvc
Floating point exception
I don't know to which package report the bug ... libqt3-mt ?
Didrik
. The latest beta version of
skype is linked with libqt4 and has the very same problem.
Didrik
--
Didrik Pinte [EMAIL PROTECTED]
Information Technologies for the Agro-Environment
signature.asc
Description: This is a digitally signed message part
Adding a DisplaySize to the Monitor section of /etc/X11/xorg.conf solved
the problem.
Didrik
signature.asc
Description: This is a digitally signed message part
On Tue, 2007-07-03 at 09:48 +0200, Francesco P. Lovergine wrote:
6.2.2 is almost out with quite a few fixes to the gis.m interfaces, I
would check with that. BTW, out svn repo contains 6.2.2 in trunk currently.
Hi,
I've found a workaround for the problem.
Everything is linked to the fact I
On Fri, 2007-06-29 at 10:03 +0200, Francesco P. Lovergine wrote:
On Wed, Jun 27, 2007 at 03:11:34PM +0200, Didrik Pinte wrote:
Package: grass
Version: 6.2.1-3
Severity: normal
Hi,
The user interface of the grass version of sid seems a bit broken. When
asking
for the vector
On Tue, 2007-07-03 at 09:48 +0200, Francesco P. Lovergine wrote:
6.2.2 is almost out with quite a few fixes to the gis.m interfaces, I
would check with that. BTW, out svn repo contains 6.2.2 in trunk currently.
Just to add some information, i've tested grass 6.2.1-3 under testing
and it
Package: openoffice.org-gtk
Version: 2.2.1-2+b2
Followup-For: Bug #430550
It seems version 1.4.10 did not solve the problem. Here is the output when
trying to launch one of the OO programs :
[EMAIL PROTECTED]:~$ oowriter
/usr/lib/openoffice/program/soffice: line 361: 5888 Floating point
Sorry for the noise, I guess my report should have been sent to #430366
and not to this bug.
Didrik
signature.asc
Description: This is a digitally signed message part
Package: grass
Version: 6.2.1-3
Severity: normal
Hi,
The user interface of the grass version of sid seems a bit broken. When asking
for the vector import dialog, something screwed up appear and the following
error message appears on the command line :
GRASS 6.2.1 (ALMERIA):~ bgerror failed to
Package: python-gdal
Version: 1.4.1-2
Severity: grave
Justification: renders package unusable
Hi,
Updating the package to 1.4.0 version breaks python-gdal.
The problem is the following :
[EMAIL PROTECTED]:~$ python
Python 2.4.4 (#2, Apr 5 2007, 20:11:18)
[GCC 4.1.2 20061115 (prerelease)
I meant upgrading to 1.4.1 concerning the version, not 1.4.0 ;-)
I had a quick look at what can be the problem. It seems that other
people add the same one but it was using not updated svn version.
http://lists.maptools.org/pipermail/gdal-dev/2007-January/011495.html
I suppose that the build
Package: grass
Version: 6.2.1-2
Severity: grave
Tags: patch
Justification: renders package unusable
Current version of Init.sh is broken because of a bash error (using elif in
place of else).
See the attached patch to correct the problem
-- System Information:
Debian Release: lenny/sid
APT
Le mercredi 04 avril 2007 à 14:49 +0200, Rene Engelhard a écrit :
[2] I've built a Debian package for the Python interface of lp-solve. It
runs
fine but i'm forced to update LD_LIBRARY_PATH by hand too to make it running
or use a rpath. Or use a wrapper script (if it's a binary which
Package: liblpsolve55-dev
Version: 5.5.0.10-2
Severity: normal
Hi,
Two arguments for using ldconfig in the liblpsolve55-dev package :
[1] I'm actually using a Matlab MEX file under Debian that is linked to the
liblpsolve55.so. It should be great if the liblpsolve55-dev package updates the
Package: liblpsolve55-dev
Version: 5.5.0.10-2
Severity: normal
Hi,
At the moment, the library files for lp-solve are in /usr/lib/lp_solve/ and the
headers in /usr/include/lpsolve/.
Would it be possible to update it to a coherent naming scheme ?
Thanks
Didrik
-- System Information:
Debian
If you want to have a look at the python-lpsolve-5.5, it's there :
svn checkout http://www.itae.be/svn/code/python-lpsolve-5.5
Didrik
signature.asc
Description: Ceci est une partie de message numériquement signée
Le mercredi 04 avril 2007 à 14:45 +0200, Rene Engelhard a écrit :
severity 417695 wishlist
thanks
Hi,
Didrik Pinte wrote:
At the moment, the library files for lp-solve are in /usr/lib/lp_solve/ and
the
headers in /usr/include/lpsolve/.
Would it be possible to update
Reading the previous mails, the problem is not very clear.
In fact, using a locale with a point as decimal separator in place of
locales using command as decimal separator solves all the previous
problems !
GDAL does not support locales like fr_BE, etc. So this bug should be
forwarded upstream.
This driver is obsolete for Logitech Quickcam Express.
It should be upgraded to the new version that has replace spca5xx :
gspcav1
It can be found here : http://mxhaard.free.fr (see the news).
I've tested the gspcav1 on Debian/Sid with success (kernel 2.6.18).
Didrik
signature.asc
Sorry, I did not see it was already available in the debian archive.
Package gspca-source and the related binaries.
Shouldn't this bug be closed ?
Didrik
signature.asc
Description: Ceci est une partie de message numériquement signée
Package: evolution
Version: 2.6.3-3
Severity: normal
Evolution seems not very happy when i'm navigating in my mail list. Crashes
only happens when i'm on my imap folders (i have to admit I only have one
folder not on my imap server). It crashes when selecting or deleting emails.
I'm pretty sure
I have two debugging session. Here is the first log :
(sorry the traceback is in french, the eror message seems to be
No file or directory of this type
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1232021824 (LWP 11760)]
0xb7e5e50f in ect_check (a11y=value
Package: sqlfairy
Version: 0.07-4
Severity: normal
Tags: patch
At the moment the /usr/bin/sqlt-graph command is not usable :
[EMAIL PROTECTED]:~/Documents/ucl/alert/python/db$ sqlt-graph --f PostgreSQL -o
test.png myscheme.sql
Undefined argument in option spec
Undefined argument in option spec
The bug should be pretty obvious to solve. It is alredy builded using
libgdal1-1.3.2-dev. See debian/control file :
Build-Depends: debhelper ( 4.1.25), python-dev, python-wxgtk2.4, proj,
python-xmlbase, libgdal1-1.3.2-dev, dpatch, wx2.4-headers,
libwxbase2.4-dev, libwxgtk2.4-dev, python-support
In order to correct the segfaults on 64 bits systems, the author have
provided a new official version integrating some important patches.
It has been tagged in the cvs release2_0_1. See :
http://www.cvstrac.org/cvstrac/tktview?tn=674
I've updated the package to this version and tested it on
Package: cvstrac
Version: 2.0.0-2
Severity: normal
Coding of some va_args functions used in the cvstrac code uses a 0 as sentinel
in place of using NULL. This causes serious problems on amd64 system. It is not
possible to edit a ticket and so on.
This renders cvstrac 1.1.5 usage on amd64
Package: cvstrac
Severity: normal
The version 2.0.0 is available upstream. Actually the 1.1.5 version is a bit
old and not really supported since version 1.2 is the stable version.
Is there some plans to update the package ?
Thanks,
Didrik
-- System Information:
Debian Release: 4.0
APT
Here attached is the files needed for the update of the debian package
to the 2.0.0 version.
I've tested it on a Debian/Sid system.
Didrik
cvstrac_2.0.0-1.diff.gz
Description: GNU Zip compressed data
There is a litte bug that is corrected in the CVS.
http://cvstrac.org/cvstrac/chngview?cn=866
I will update the package applying the patch.
I've tested the new package on i386 and amd64 successfully.
Didrik
signature.asc
Description: Ceci est une partie de message numériquement signée
modules
: python-gdal, python-matplotlib, python-Numeric and python-numpy
Author : Didrik Pinte [EMAIL PROTECTED]
Date : 30 may 2006
'''
import unittest
import ogr
class TestIntersection(unittest.TestCase):
def test_polyintersection(self):
'''
Test that surface
The problem seems to be deeper than that.
In fact, it's an interaction problem between matplotlib-numpy and
numeric.
python-gdal is python-numeric dependant. Matplotlib can use either
python-numeric or python-numpy. When matplotlib is configured to use
python-numpy and your script uses gdal and
Hi Bernhard,
The solution is to install the python-gdal module with the following
command :
pycentral pkginstall python-gdal
(this will make the package available for all supported runtimes.)
It seems that pycentral does not update all the installed modules when
changing the python default
Package: python-gdal
Version: 1.3.2-2
Severity: important
The ogr swig bindings are dependant of python Numeric and are not functionnal
with the new numpy packages. If python-numpy is installed, the python-gdal
bindings seems to work but aren't working correctly (Intersection and Disjoint
method
Hi,
What about updating the package to the new 4.04 version. It fixes lots
of things.
Is there any plan on updating the package ?
Many thanks in advance,
Didrik
signature.asc
Description: Ceci est une partie de message numériquement signée
Package: apt-listchanges
Version: 2.59-0.2
Severity: important
Hi,
Since monday, the 26th, my apt-listchanges does not seem to work
anymore.
When using apt-get or aptitude, the output show it parses the changelogs
but nothing is done by apt-listchanges.
I'm pretty sure the bug is not on the
.
When resuming, if I try a Fn+F3 that serve for disabling the screen, it
seems to work but the laptop stays freezed.
I can provide any log files, or do some tests if needed.
Many thanks for you work,
Didrik Pinte
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT
Package: gthumb
Version: 3:2.6.9-2
Severity: normal
Since the last update of gthumb, it's not possible anymore to access the
modules.
For example, when trying to rotate an image, here is the error :
** (gthumb:22693): WARNING **: Error, unable to open module file
-
Hope this will help to debug the problem.
Didrik Pinte
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: pida
Version: 0.2.2-2
Severity: wishlist
The new 0.3.1 version is online and seems really better than 0.2.2.
I'll have a look at the source package and try to upgrade it.
Please let me know if you're in the upgrade process.
Didrik Pinte
-- System Information:
Debian Release: testing
Le lundi 06 mars 2006 à 18:26 +0100, Jan Lübbe a écrit :
Am Montag, den 06.03.2006, 17:55 +0100 schrieb Didrik Pinte:
The new 0.3.1 version is online and seems really better than 0.2.2.
I'll have a look at the source package and try to upgrade it.
Please let me know if you're
Le dimanche 12 février 2006 à 19:43 +0100, Kristian Edlund a écrit :
Well that defininatly explains why update-grub stops. It gets 1 as
return value and therefore exits.
It seems that the file /dev/sda1 does not exist or something goes
wrong in readlink. Can you try
ls -la /dev/sda1
in
Le samedi 11 février 2006 à 10:19 +0100, Kristian Edlund a écrit :
Can you reproduce the error when you run update-grub with sh update-grub?
Can you send supply your menu.lst file, and try to run update-grub
with sh -x update-grub and send the output of that file as well.
Kristian
The
Le dimanche 12 février 2006 à 19:22 +0100, Kristian Edlund a écrit :
Hi again
It doesn't fail on my machine, so either it is caused by the amd64
architecture or the raid device.
It seems to fail around the command readlink -f /dev/sda1
Can you send the output of
readlink -f /dev/sda1
Le dimanche 12 février 2006 à 19:43 +0100, Kristian Edlund a écrit :
Well that defininatly explains why update-grub stops. It gets 1 as
return value and therefore exits.
It seems that the file /dev/sda1 does not exist or something goes
wrong in readlink. Can you try
ls -la /dev/sda1
in
Package: grub
Version: 0.97-4
Severity: serious
Justification: 2
Hi,
I've just updated an AMD64 server with dist-upgrade to the latest grub
version and kernel 2.6.15.
The upgrade jumped from before 0.97-1 version to 0.97-3 version.
When calling update-grub, I receive :
upgrading from 2.6.14-2-686 4 to 5 breaks the system. Luckily, i had
kept an old 2.6.12 kernel ;-)
Here are the information you ask for more details :
ii linux-image-2.6.14-2-6862.6.14-5 Linux kernel 2.6.14 ...
ii yaird 0.0.12-1 Yet Another mkInitRD
Package: mairix
Version: 0.16.1-1
Severity: wishlist
Hi,
Mairix 0.17 is out. Is it possible to package it ? It contains really
interesting new features (like indexing of Evolution imap folders).
Thank you in advance.
Didrik Pinte
-- System Information:
Debian Release: testing/unstable
APT
Hi,
Thuban does not seem to be installable. I'll try to change the
dependencies and check if this works.
The problem is that :
[EMAIL PROTECTED]:~$apt-cache policy libwxgtk2.4-1
libwxgtk2.4-1:
Installé : 2.4.4.1.1
Candidat : 2.4.4.1.1
Table de version :
*** 2.4.4.1.1 0
990
Hi guys,
I've build the package changing the dependy to libwxgtk2.4-python to
python-wxgtk2.4. It seems to build and work ... I don't really know
thuban, so I can't compare with an official version.
If someone wants to test my .deb, I can make it downloadable.
Didrik
signature.asc
Package: python2.3-kde3
Version: 3.11.3-4
Severity: grave
Justification: renders package unusable
Hi,
python2.3-kde3 depends on kdelibs4. kdelibs4 does not exist anymore in
Sid repositories.
Probably that the dependency should be on kdelibs.
It's the same for the libqt3c102-mt dependency.
Package: eric
Severity: wishlist
Hi,
I'm trying to install eric on an up-to-date Sid system.
Is it possible to update Eric with libqt3c102-mt in place of libqt3-mt ?
Dependencies of other packages renders it uninstallable on my system (... it's
Skype in fact).
Didrik
-- System
Le mardi 01 novembre 2005 à 22:22 +0100, Loic Minier a écrit :
On mar, nov 01, 2005, Oystein Gisnas wrote:
I previously had a number of contacts stored in Evolution. Now there seem
to be no contacts at all. The data files
(~/.evolution/addressbook/local/system/addressbook*) are still
The problem seems to be related to a recent upgrade of
evolution-data-server (1.2.3-6) in Sid.
Didrik
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
1 - 100 of 120 matches
Mail list logo