.
On Sun, Jul 2, 2023 at 6:15 PM Itai wrote:
> Thank you for the reply, attached is the output (log file).
>
>
> On Sat, Jul 1, 2023 at 11:17 PM Dylan Aïssi wrote:
>
>> Le lun. 3 avr. 2023 à 18:54, Itai Shaked a écrit :
>> >
>> > I am at a loss since th
Thank you for the reply, attached is the output (log file).
On Sat, Jul 1, 2023 at 11:17 PM Dylan Aïssi wrote:
> Le lun. 3 avr. 2023 à 18:54, Itai Shaked a écrit :
> >
> > I am at a loss since there seems to be zero usable information in the
> logs,
> > just th
Package: pipewire
Version: 0.3.65-3
Severity: normal
Dear Maintainer,
No audio, pipewire fails to start. Logs contain no real information. Following
is the result of "journalctl --user -u pipewire.service":
Started pipewire.service - PipeWire Multimedia Service.
pipewire.service: Main process
Package: wkhtmltopdf
Version: 0.12.3.2-3
Severity: important
Dear Maintainer,
wkhtmltopdf shipped with current Debian does not recognize some header and
footer options, giving error messages like [sic.]:
The switch --header-spacing, is not support using unpatched qt, and will be
ignored.The
s complete impossibility to login.
b. No information about the error is found anywhere (the file
/etc/gdm3/PreSession/Default says errors will be logged to
.xsession-errors, but that file contained no useful information).
Regards,
Itai.
Please let me know if there is any other relevant information I can
provide, or tests to perform.
Regards,
Itai.
Xorg.1.log-0409
Description: Binary data
Package: xserver-xorg-video-all
Version: 1:7.7+19
Severity: wishlist
Dear Maintainer,
The description of the package `xserver-xorg-video-intel` says:
> The use of this driver is discouraged if your hw is new enough (ca. 2007 and
newer). You can try uninstalling this driver and let the server
) xf86CloseConsole: VT_ACTIVATE failed: Operation not
permitted
[ 128.225] (EE) Server terminated with error (1). Closing log file.
Please let me know if there is any more useful information I can provide.
Regards,
Itai.
On Wed, Aug 2, 2017 at 11:21 AM, Itai Shaked <itai...@gmail.com> wrote:
>
Package: gdm3
Version: 3.22.3-4
Severity: important
Dear Maintainer,
For a few months I am unable to login using gdm3. The greeter shows up
normally, but upon entering login information the screen flickers and the
system becomes barely-responsive for a few minutes, until I am left with a bare
Package: culmus-fancy
Version: 0.0.20051018-3
Severity: wishlist
Dear Maintainer,
culmus-fancy only includes older Type1 fonts, while the regular culmus package
contains the newer OpenType fonts.
It is currently impossible to use Type1 fonts in XeLaTeX with polyglossia.
Most fancy fonts are
Screen
Identifier Default Screen
Monitor VP2030b
Monitor VP2030b2
SubSection Display
Virtual 3200 1600
EndSubSection
EndSection
Section ServerLayout
Identifier Itai
#Screen LCD
#Screen CRT
On Wed, Apr 13, 2011 at 09:33:42AM +0200, Sven Joachim wrote:
On 2011-04-13 09:01 +0200, Itai Seggev wrote:
Just installed new the kernel+drm+x11 in testing, and I get start x11. It
dies
with a dlopen error complaining of an undefined symbol.
I suppose that is because you have
Package: libhadoop-java
Version: 0.20.2+dfsg1-2
Severity: wishlist
According to the wiki:
http://wiki.debian.org/Hadoop
s3 support is missing because jets3t isn't packaged. But jets3t is in
Debian as of 3/25/2010. So, what's the holdup?
-- System Information:
Debian Release: 6.0
APT
Package: desktop-base
Version: 5.0.6
Severity: normal
Tags: lenny
Hi. I apologize for creating what's essentially a duplicate of bug 410487.
Somehow I missed the original email from two years ago, and since the email one
month ago, it's only now that I've had some time to configure a machine to
Package: resolvconf
Version: 1.46
Severity: normal
I think I've had this issue for a while (2-3 months?) but only recently traced
it to resolvconf. This may or may not be related to #563386 resolvconf:
Error: /etc/resolvconf/run/interface is not a directory. I get that same
error message, but
Package: resolvconf
Version: 1.46
Severity: normal
I use ppp for my comapny's VPN. I could be delusional, but I'm pretty sure
that specifying usepeerdns used to cause the vpn nameservers to be added to
/etc/resolv.conf, and then upon disconnet for them to be removed. When I
upgraded from 1.45
Package: console-setup
Version: 1.45
Severity: normal
If I do a dpkg-reconfigure consle-setup, I get a nice gui for setting all sorts
of keyboard options. However, my prefered layout toggle option,
grp:shifts_toggle, is not listed. I managed to work around this by direcly
editing
On Tue, Jul 07, 2009 at 06:55:36PM -0700, Don Armstrong wrote:
On Tue, 07 Jul 2009, Itai Seggev wrote:
On Sat, Jun 20, 2009 at 12:25:58PM -0700, Don Armstrong wrote:
On Sat, 20 Jun 2009, Don Armstrong wrote:
Here is the output; I can reconfirm that this happens on powerbooks
,
Roland Clobus
--
Itai
Itai Seggev, Knox College, Mathematics Department
In 1997 a group of programmers started writing a desktop environment to fix a
travesty they didn't create. Their program promptly found its way onto un*x
systems everywhere. Today, still opposed by a software monopolist
...
Connected to localhost.
Escape character is '^]'.
version report
^]
telnet close
Connection closed.
--
Itai
Itai Seggev, Knox College, Mathematics Department
In 1997 a group of programmers started writing a desktop environment to fix a
travesty they didn't create. Their program promptly found its way
Package: laptop-mode-tools
Version: 1.49-1
Severity: normal
I got an error message on upgrade, although everything seems to be
working fine now.
---
Enabling laptop
I'm getting this too:
$ mpg123 *
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3.
Version 0.59q (2002/03/23). Written and copyrights by Joe Drew.
Uses code from various people. See 'README' for more!
Playing MPEG stream from ...
MPEG 1.0 layer III, 128 kbit/s, 44100 Hz
the emacs
snapshot packages from http://emacs.orebokech.com as well as mplayer, vlc, and
related packages from http://www.debian-multimedia.org.
--
Itai
Itai Seggev, Knox College, Mathematics Department
In 1997 a group of programmers started writing a desktop environment to fix a
travesty
-build] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2
debuild: fatal error at line 1324:
dpkg-buildpackage -rfakeroot -D -us -uc failed
error message snippet
--
Itai
Itai Seggev, Knox College, Mathematics
and improve db upgrade commands in README.Debian, and adjust
NEWS. Closes: bug#533344, thanks to Itai Seggev.
* Update dependencies:
+ Suggest texlive-base-bin (not tetex-bin). Closes: bug#533345,
thanks to Itai Seggev
+ Suggest (not recommend) libpam-cracklib
of
build dependencies, I shall leave to wiser minds than mine.
--Itai
On Tue, Jun 16, 2009 at 10:06:10PM +, Debian Bug Tracking System wrote:
This is an automatic notification regarding your Bug report
which was filed against the netatalk package:
#533141: Current netatalk fails to build
Package: netatalk
Version: 2.0.4~rc2-1
Severity: minor
There are three errors in the Upgrading Problems section of
/usr/share/doc/netatalk/README.Debian.
1) In addition to the errors like those in #200373, a db version mismatch can
prevent a connection from being made at all. Log file
Package: netatalk
Version: 2.0.4~rc2-1
Severity: serious
Netatalk currently suggests the transitional package tetex-bin. This should be
replaced with texlive, texlive-base, or texlive-base-bin.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (750,
Package: netatalk
Version: 2.0.4~rc2-1
Severity: serious
Okay, perhaps I am cluless or there's something seriously wrong with my system,
but this has never failed me in the past. I am try to rebuild the package from
source to enable openSSL.
Going through the following
apt-get source
On Mon, Jun 15, 2009 at 09:53:46AM +0200, Jonas Smedegaard wrote:
Hi Itai,
On Mon, Jun 15, 2009 at 02:10:20AM -0500, Itai Seggev wrote:
Okay, perhaps I am cluless or there's something seriously wrong with my
system, but this has never failed me in the past. I am try to rebuild
Package: pioneers
Version: 0.12.2-4
Severity: grave
I'm not sure when exactly this happened, but pioneers no longer works. I'm
getting the same behavior on three different machines of two different
architectures (amd64 and ppc). I tried reinstalling and I've reccompiling the
source pacakge
Package: kdm
Version: 4:4.2.2-2
Severity: important
When I first installed kdm 4.2.2, it would crash on startup with the
error message No greeter widge plugin loaded. Check the
configuration. I went back and looked for missing packages, and
discovered that somehow I had managed to install a
Package: kwin
Severity: normal
I'm not sure if this is relevant (and I've tried the kde4 packages; as soon as
my laptop is down compiling some stuff I will, though), but this also affected
my system which uses the opensource nouveau driver.
I'd also like to point out that this bug was allowed
--
Itai
Itai Seggev, Knox College, Mathematics Department
In 1997 a group of programmers started writing a desktop environment to fix a
travesty they didn't create. Their program promptly found its way onto un*x
systems everywhere. Today, still opposed by a software monopolist, they survive
I just came across this bug report, tried wmname, and found that it
fixed my issues with running jconsole on amd64 and XMonad.
I suggest you include a mention of wmname and the problem in general
in your README.Debian. I've been trying to find a workaround for this
issue for weeks. A mention in
For me, at least, the first place to put such an important note is in
the wiki page of the project.
It is actually there - but in a sort of an obscured and confusing way
- as some hack that some user did to get things work.
As this is now the standard way in which wireless should work in the
Package: xara-gtk
Version: 1.0.25
Followup-For: Bug #478125
I have an unmodifed xara-gtkrc-2.0 and xara segfaults for me. I use gtk-qt
engine with the Keramik qt style.
154:cavy-v4:~ md5sum /etc/xara-gtkrc-2.0
eba47292b0662d09cfcdd6e28b0d2440 /etc/xara-gtkrc-2.0
155:cavy-v4:~ dpkg -s
Package: mozplugger
Version: 1.10.2-1
Followup-For: Bug #489755
This may be a bit late with lenny being in freeze and all, but this bug is
fixed in current upstream cvs (I have tested it myself). It would be nice if
we could get this into lenny as it is a significant usability bug on AMD64.
--
Proven efficacy in more than 20,000 men worldwide - average gains of 3.02
inches.
http://www.aluuio.com/
3 inches, but a world of difference
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Unleash your huge 9inch lovestick on her and watch her come.
http://www.prinkelst.com/
Affordable, permanant and effective results.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: jmp
Version: 0.51-1
Severity: important
I'm using jmp to profile a web app running under Jetty, started by Maven :).
Like this:
$ export MAVEN_OPTS=-Xrunjmp
$ mvn jetty:run
And eventually get:
[INFO] Starting jetty 6.1H.4-beta ...
2008-02-29 11:03:50.690::INFO: jetty-6.1H.4-beta
+0x9a4) [0x80a8394]
4: /usr/X11R6/bin/X(main+0x27b) [0x8076c6b]
5: /lib/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb7dd1050]
6: /usr/X11R6/bin/X(FontFileCompleteXLFD+0x1ed) [0x80761c1]
Fatal server error:
Caught signal 11. Server aborting
--
Itai
Itai Seggev, Knox College, Mathematics
/X11R6/bin/X(FontFileCompleteXLFD+0x1ed) [0x80761c1]
Fatal server error:
Caught signal 11. Server aborting
--
Itai
Itai Seggev, Knox College, Mathematics Department
In 1997 a group of programmers started writing a desktop environment
to fix a travesty they didn't create. Their program promptly
Package: g++-4.2
Version: 4.2.1-4
Severity: minor
Hi. Sometime in the last month or so, g++ has started spitting out at me a
bunch of warning: deprecated conversion from string constant to ‘char*’
messages. This apparently comes from -Wwrite-strings. However, according to the
man/info pages, this
, of these
modes is secure? Does vpnc support all or only some of theme?
Thanks,
--Itai
[1] http://www.cisco.com/warp/public/707/cisco-sn-20040415-grppass.shtml
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (110, 'unstable')
Architecture: i386
Package: gtk-qt-engine
Version: 1:0.8~svn-rev36-2
Severity: normal
Tags: l10n
This bug came out of the discussion for bug #439559. You can read there for
more background. In short, GTK apps appranetly have some way of indicating
whether they are in Left-to-Right to Right-to-Left mode. gtk-qt
Package: emacs22-gtk
Version: 22.1+1-1
Severity: normal
Tags: l10n
Emacs22 has these shiny new forward/back, next/previous, etc. buttons for
things like info mode. When using gtk Emacs, my menu bar goes from
right-to-left since my system locale is Hebrew. However, the back button still
points to
Package: linux-image-2.6.21-2-686
Version: 2.6.21-6
Severity: important
I normally use a self-compiled kernel, but keep a debian kernel around. After
booting into the 2.6.21-2-686 kernel, X wouldn't start (log file below). This
problem does not occur with my self-compiled 2.6.21 kernel (from
no longer recall).
I, personally, think the error check is trivial and worth it, but of
course the final decision is up to you. I've just tested removing
COLUMNS=80 from the script, and it seems to be working fine, so I'm OK
with the bug being closed.
--
Itai
Itai Seggev, Knox College
In 1997
from the Screen section.
Hi Itai,
Any news about this? Could you reply to what Drew requested above? It
would for instance let us know whether your monitor has a preferred
mode, which might explain why the new driver chooses one mode instead of
another.
Thanks,
Brice
Sorry, I
On Thu, Aug 09, 2007 at 08:30:11AM +0200, Brice Goglin wrote:
Itai Seggev wrote:
The output to the first two commands is below.
Did you forget to paste it ?
*sigh* That's what I get for sending email at 1am. It's at the end of
the email.
I didn't know about
xrandr and using
in this thread, I figured out that I need to
add --output VGA to the command line. Once I did this, I was able to
set the resolution to my desired resolution. It still seems to be a
bug that before the upgrade in respected my preferences in xorg.conf,
but afterwards it didn't.
--
Itai Seggev
above and the following to the monitor
section of your xorg.conf
Option PreferredMode 1280x1024_75.00
(as explained in
http://www.tetromino.net/blog/2007/04/25/manual-modesetting-for-xf86-video-intel/)
OK. This fixed it (and I learned a few things along the way).
Many thanks!
--
Itai
Package: xserver-xorg-video-intel
Version: 2:2.0.0-1
Severity: normal
This seems very similar to bug #424952, but manifests differently.
I have a Dell Dimension with an i845 Rev 1 graphics. I've been happily using it
in 1280x1024 mode for a couple of years. I upgraded today to the new intel
On Thu, Jun 28, 2007 at 01:03:27AM +0200, Brice Goglin wrote:
Itai Seggev wrote:
Package: xserver-xorg-video-intel
Version: 2:2.0.0-1
Severity: normal
Please try xserver-xorg-video-intel 2:2.0.0-5 currently in experimental.
It contains a much more recent git snapshot. If it does
On Fri, Jun 08, 2007 at 08:59:23AM +0200, Frank Küster wrote:
Itai Seggev [EMAIL PROTECTED] wrote:
In order to understand what is going on, we need the packages which are
actually installed on your system. Please send the output of
dpkg -l tex-common
dpkg -l tetex* | grep -v '^un
On Thu, Jun 07, 2007 at 01:26:19PM +0200, Frank Küster wrote:
Itai Seggev [EMAIL PROTECTED] wrote:
So, it seems that this not a grave bug since it is installable, but
perhaps it is still serious bug since it doesn't have sufficient
dependencies to ensure installability? At any rate, that's
Package: lmodern
Version: 1.010x-3
Severity: grave
Justification: renders package unusable
I upgraded a whole flotilla of packages today. I didn't mean upgrade an
TeX packages as I'm waiting on TeXLive to stabalize, but apparently aptitude
decided to upgrade lmodern (or maybe I was just
serious bug since it doesn't have sufficient
dependencies to ensure installability? At any rate, that's for you,
Kindly Mr. Maintainer, to decide.
Sorry for the trouble...
--
Itai
Itai Seggev, University of Mississippi, Department of Physics and Astronomy
In 1997 a group of programmers started
Package: xosview
Version: 1.8.2-11
Severity: normal
I recently upgraded my system, including the xosview which entered
lenny in April. Xosview no longer respects my settings in
~/.Xdefault. If I modify /etc/X11/app-defaults/XOsview, than the
changes are okay. I've even re-run xrdb just to make
Package: shfs-source
Version: 0.35-6.2
Followup-For: Bug #420770
Attached is a patch from gentoo. I haven't tested it extensively, but it
applies more or less cleanly and seems to work.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (750, 'testing'), (110,
found 391846 0.35-6.2
thanks
I apologize if I'm doing this wrong, but the BTS lists this bug as
fixed when it most definitely is not. I've just tried compiling it
several times today and it fails miserably. (I'm not sure why it
compiles with 2.6.18, but it does.)
--
Itai Seggev
South see general obstetrics gynecology
http://img444.imageshack.us/my.php?image=tuak0.png
benefits company provides affordable
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
name, and then
the search plugins are under browser/searchplugins/. They all have a
google.xml which correctly sets the locale from the environment, so
that would have to be excluded from the patch.
--
Itai Seggev
Visiting Assistant ProfessorOffice: Lewis
Package: adept-notifier
Version: 2.1.2
Severity: normal
Whenever I click on the adept notifier, it wants to upgrade all
packages, even those marked as hold (or is this a bug in a
adept-updater?). Aptitude, apt-get get, and even dselect are all smart
enough not do this without at least asking for
Package: iceweasel
Version: 2.0.0.2+dfsg-3
Severity: wishlist
It used to be that you could start with an alternate profile using
firefox -p prof_name, and that firefox -p would bring up the
profile manager. This no longer works. After finally resorting the
something radical like RTFM and RBTS
Package: iceweasel-l10n-he
Version: 2.0.0.1+debian-2
Severity: wishlist
The Hebrew version of [trademarked name deleted] includes several
search engines not include with the English package. These are:
morfix-dic.xml
nana.xml
netex.xml
wikipedia-he.xml
The first one is particularly important
Package: mol-source
Version: 0.9.71.dfsg-4
Severity: normal
When I try to install modules created from the most recent mol-source,
they fail to install:
Unpacking replacement mol-modules-2.6.18cavybook1 ...
dpkg: error processing
mol-modules-2.6.18cavybook1_0.9.71.dfsg-4+7.0_powerpc.deb
cd'd into /usr/src/modules/mol and did a make install,
the resulting module worked just fine. Mol is the only module I'm
having problems with, so I think the issue is in mol and not
kernel-package or other packages.
--
Itai
Itai Seggev, University of Mississippi, Department of Physics and Astronomy
Package: desktop-base
Version: 4.0.0
Severity: normal
Tags: l10n
I don't normally use the KDE themes (only had a taste of it becuase of
the broken KDE 3.5.5 upload), and this may be a bug in kdm instead, but:
In the debian-moreblue theme, when a right-to-left (RTL) language such
as Hebrew,
Package: linux-patch-bootsplash
Version: 2.6.18-1
Severity: serious
Justification: FTBFS
It appears that in order build boot splash, you must select the VESA
driver. However, the VESA driver is not available on powerpc (and I
presume other x86 platforms).
-- System Information:
Debian Release:
Package: gs-esp
Version: 8.15.3.dfsg.1-1
Followup-For: Bug #353089
I tried 8.15.3.dfsg.1-1, but the issue continues. However, I made an
interesting discovery. When I downgraded back to 7.07.1-9, I was lazy
at first and used --force-depends to downgrade without also
reinstalling libgimpprint1. The
Package: iceweasel
Version: 2.0+dfsg-1
Followup-For: Bug #400856
I totally agree that IceWeasel needs to use one of the pretty icons
https://wiki.ubuntu.com/IceWeaselIcon. I would have filed my own bug
last weekend but didn't have time, so now I'm reduced to saying Me Too!
--Itai
Package: koffice-data
Version: 1:1.5.2-2
Followup-For: Bug #376919
This violates section 2.2.1 of the Debian policy (`thus, the package
must not declare a Depends, Recommends, or Build-Depends
relationship on a non-main package'). Therefore it should be
serious, not important, right?
--Itai
Package: gs-esp
Version: 8.15.2.dfsg.1-1
Followup-For: Bug #353089
I tried the new version to recently enter etch, and it seems that
the bug is now fixed.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (110, 'unstable'), (10,
Package: bluemon
Version: 1.3-1
Followup-For: Bug #359240
I've also seen this, using the package provided /etc/default/bluemon.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (750, 'testing'), (110, 'unstable'), (10, 'stable')
Architecture: powerpc
Package: yaboot
Version: 1.3.13a-1
Severity: wishlist
Debian's grub has a nice update-grub script which addes explicit targets
for newly installed kernels. It would be nice if this could be ported to
yaboot.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT
On Tue, Jul 11, 2006 at 07:03:39PM +0200, Hilmar Preusse wrote:
On 11.07.06 Itai Seggev ([EMAIL PROTECTED]) wrote:
Here is a first patch. I've checked all links by clicking on them. A
lot of them I could fix by just changing the base_url. The files in
tetex-doc-non-free do not reside yet
Package: tetex-doc
Version: 3.0-19
Severity: normal
Most of the links in /usr/share/texmf-tetex/doc/index.html are
broken. They appear to refernce /usr/share/texmf/doc, when they should
be pointing to /usr/share/texmf-tetex/. This severly limits the
utility of the nice summary page.
-- System
December 2005 15:16, Itai Seggev wrote:
I started with the Debian pacakged kdmrc, then edited the file by
hand. I tried using the KDE Control Center as you suggested, and that
worked fine. Confused, I looked at the config file it generated, and
saw that it set Lang to he rather than he_IL or he
Package: x11-common
Version: 6.9.0.dfsg.1-6
Severity: minor
The default Xsession.options now has 5 options in it, the last being
use-session-dbus. This option is not documented in the corresponding
man page, however.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
exactly why this is happening. Any help would be appreciated.
Thanks,
Itai
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (110, 'unstable'), (10, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux
so they continue to work, but since I'm not fluent in German I
find it extremely difficult to enter new ones). This might be remotely
sane if I had a German locale installed, but I do not. I have en-US
and he installed.
Thanks,
--Itai
-- System Information:
Debian Release: testing/unstable
APT
runs
on that box.
--
Itai
Itai Seggev, University of Mississippi, Department of Physics and Astronomy
In 1997 a group of programmers started writing a desktop environment
to fix a travesty they didn't create. Their program promptly found
its way onto un*x systems everywhere. Today, still
Package: firefox-locale-he
Version: 1.5.0.1lang20060327-1
Severity: wishlist
In the past (firefox 1.0.x) there was a separate theme for RTL
language like Hebrew. This package has been obsoleted now that the
default firefox themes are RTL aware. It would be nice if the new
locale packages add a
I think this bug may be saefly closed now, as the relicensing project
is complete:
http://weblogs.mozillazine.org/gerv/archives/2006/03/relicensing_complete.html
--
Itai
Itai Seggev, University of Mississippi, Department of Physics and Astronomy
In 1997 a group of programmers started writing
Package: bcm43xx-source
Version: 20060212-3
Severity: normal
This may be the same bug as 353996, but I found that report so confusing
I really wasn't sure. This may also be a case of operator error, but I'm
not sure what I've done wrong. Anyway, I followed this procedure in
trying to help bcm43xx
Package: bcm43xx-source
Version: 20060125-2
Severity: normal
when I try to compile the bcm43xx-source module, it fails with
make[1]: Entering directory `/usr/src/modules/bcm43xx'
./debian/rules:18: /usr/share/dpatch/dpatch.make: No such file or
directory
make[1]: ***
Package: kdvi
Version: 4:3.5.1-2
Severity: important
Ever since the upgrade to 3.4, kdvi has stopped display eps figures.
All I get is a blank space, and on the command line the error message
kdvi (kdegraphics): ERROR: GS did not produce output.
This problem persists in 3.5. My sarge machine
to gs-esp, or should I submit a new bug?
Sorry for wasting your time.
--
Itai
Itai Seggev, University of Mississippi, Department of Physics and Astronomy
In 1997 a group of programmers started writing a desktop environment
to fix a travesty they didn't create. Their program promptly found
its
with lspci
output or other information if you feel it would be useful.
--
Itai
Itai Seggev, University of Mississippi, Department of Physics and Astronomy
In 1997 a group of programmers started writing a desktop environment
to fix a travesty they didn't create. Their program promptly found
its
On Thu, Dec 29, 2005 at 04:36:42PM -0500, Christopher Martin wrote:
On Tuesday 27 December 2005 00:51, Itai Seggev wrote:
Package: kdm
Version: 4:3.4.3-3
Severity: important
Tags: l10n
KDM has 'issues' reading /etc/kde3/kdm/kdmrc configuration files from older
versions of kdm, so
Package: kdm
Version: 4:3.4.3-3
Severity: important
Tags: l10n
If I keep the Language option in kdmrc on the default en_US, then the
greeter will happily accept both Hebrew and Enlgish input, even though
all the menu items are in Englsih. If, however, I change the option to
he_IL or he_IL.UTF-8,
I've just installed 3.4.3, and it is working again. Yay! I think this
bug can be safely closed now.
--
Itai
Itai Seggev, University of Mississippi, Department of Physics and Astronomy
In 1997 a group of programmers started writing a desktop environment
to fix a travesty they didn't create
Package: apt-move
Version: 4.2.24-1
Severity: wishlist
There is a new upstream release available, 4.2.26. It would be nice if
this were incorporated into the debian pacakge.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (10,
Package: apt-move
Version: 4.2.24-1
Severity: normal
The new version of apt which has propogated to etch provides
libapt-pkg-libc6.63-3.11 rather than libapt-pkg-libc6.63-3.10, making
apt-move uninstalable on both sid and etch.
-- System Information:
Debian Release: testing/unstable
APT
Package: ipodder
Version: 2.1-2
Severity: important
Ipodder crashes on startup. This bug seems to me to be different from
the other crash on startup bugs reported, as I do not have
wxgtk-2.4python installed and it gives me an X error message:
[class 'ipodder.players.XMMSPlayer', class
Package: penguin-command
Version: 1.6.7-2
Followup-For: Bug #335402
shouldn't this bug be closed? It would seems that this was fixed with
1.6.9-2. Right now this bug is the only thing preventing 1.6.10-1
from entering etch.
-- System Information:
Debian Release: testing/unstable
APT
Spidermonkey JS engine.
Itai Seggev, you said this means that many packages can't compile.
What are them? Can you try again?
Sorry for the delayed response. I've tried them again (mainly the
mplayer plugin), and they seemm to be working. As I recall, it was
mozilla-plugin that was the culprit
Whatever the problem was, it has gone away with beta 2. I guess you
can close the bug report now.
--
Itai Seggev
Visiting Assistant ProfessorOffice: Lewis 121A
Department of Physics and Astronomy Phone: +1-662-915-3887
University of Mississippi
1 - 100 of 144 matches
Mail list logo
