Package: xserver-xorg-video-nvidia-legacy-96xx
Version: 96.43.23-90
Severity: important
Dear Maintainer,
Brand new install of jessie on a machine with an nvidia GeForce4 MX 420,
which requires the nvidia-legacy-96xx driver. It appears that the 96xx
drivers have not migrated to jessie from sid
Hello,
Upon further investigation, I did find that it appeared that the LCD
inverter was involved (had this error message from the BIOS diagnostics:
LCD inverter detection FAIL 1000-0323) but that turned out not to be the
real cause of the problem. The real problem was the lid switch, which
some
Hello again,
With the system updated today (03/09/13), standard wheezy kernel, with
/etc/default/grub changed as follows:
GRUB_CMDLINE_LINUX_DEFAULT="quiet nouveau.noaccel=1"
and after running update-grub, the screens became totally unreadable.
Both the main display and the secondary screen con
Hello again,
Something has changed after the latest upgrade of the nouveau driver.
Whereas before the machine wouldn't even turn off unless the power button
was held for about 10 seconds, it is now the case that (sometimes) a quick
press of the off button is caught and the machine shuts down clea
Hello again,
Just noticed, on reboot after a lock up, the message in the subject line.
Looking back at the original bug report, dmesg data was included by
reportbug, but it was garbled (no new lines) so might have escaped notice.
This is the complete line, with the 2 previous ones:
[5.72306
Hello,
I enclose the Xorg.0.log of the nvidia driver run. This was done by:
Uncommenting
blacklist nouveau
in /etc/modprobe.d/nvidia-kernel-common.conf
Commenting
#blaclist nvidia
in /etc/modprobe/blacklist.conf (I had to create this file)
using the previously provided /etc/X11/xorg.conf (as
Package: nvidia-kernel-legacy-96xx-source
Version: 96.43.23-3
Severity: grave
Justification: renders package unusable
Dear Maintainer,
Having noticed that the legaxy-96xx packages have been upgraded in the
last few days, I tried the old nvidia binary driver that used to work
fine in lenny on thi
Hello again,
As of January 15, 2013, with a totally up-to-date wheezy system,
tried to run openscad and it didn't work
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on display ":0".
Xlib: extension "GLX" missing on
Hello again,
On January 12, 2013, after an update (that upgraded dozens of kde
libraries) and a reboot, I was quickly paging through a pdf document with
evince and the system locked up again. After a hard power-off (holding
the power button down for 5-10 seconds - the only way to regain access)
Hello again,
As of December 26, 2012, with up-to-the-minute wheezy, installed xtide,
which is available in a wheezy package. It has the same illegible font
problem as gbuffy (as reported in the previous bug report addendum).
So, this is not a gbuffy or old library problem... Any further test
a
Hello again,
As of December 21, 2012, with wheezy updated just now, the following still
occurs:
Moving any window (click on the title bar and drag) locks up the system
instantly. As I currently have no other machines connected to a local
network, I can't get in through ssh. All I can do is a h
Hello again,
Due to circumstances beyond my control, I haven't been able to continue testing
for the last few weeks. I recently did an upgrade where about 500 packages
were updated, including xserver-xorg-video-nouveau and the kernel. Something
has been fixed as the problem is now not repeatabl
Hello,
Per this page:
http://wiki.debian.org/DebianUnstable#How_do_I_backport_a_sid_package_to_testing_or_stable.3F
I did the following:
added
deb-src http://ftp.us.debian.org/debian/ sid main contrib non-free
to /etc/apt/sources.list
then:
apt-get update
apt-get build-dep xserver-xorg-video-
Package: sl-modem-daemon
Version: 2.9.11~20110321-8
Severity: important
Dear Maintainer,
* What led up to the situation?
Installing Debian Wheezy (testing) on a new HD. In Lenny the modem was
working fine. It was used mostly as an answering machine. The packages
sl-modem-daemon-daemon, sl-
Hello,
More symptoms:
When an application puts out text to the console (in my case fsck on a
usb drive reporting I/O errors) random dots appear, sometimes all over
the screen. Sometimes, the text on the screen is totally unreadable.
Shifting consoles (ctl-alt-Fn) redraws the screen and the text
Package: kbarcode
Version: 2.0.6-1
Severity: important
In label editor (Avery letter, 5371), once in the properties dialog:
When entering text Insert -> Text, after exiting the dialog via OK,
any changes made in the dialog: font size, bold/italic/underline, etc
is not reflected in the main label
Package: kbarcode
Version: 2.0.6-1
Severity: important
In label editor (Avery letter, 5371), once in the properties dialog:
When entering multiple lines of text, after exiting the dialog via OK,
the text that appears in the label editor's main window does not reflect
the line breaks in the ente
Package: nvidia-glx-legacy-96xx
Version: 96.43.07-2
Severity: important
This problem is repeatable with 2 applications: kbarcode and korganizer.
Both applications work in the predictable way on another X server (neomagic
driver on a Thinkpad 600E). The problem also manifests itself when attempt
Package: sl-modem-source
Version: 2.9.9d+e-pre2-12
Severity: important
This is new behavior in the new Lenny installation. Under Etch it worked
fine. With this problem, the modem is unusable with vgetty. I have
restored the same configuration files that worked before, but now the
modem never a
Package: lirc
Version: 0.8.3-3
Severity: grave
Justification: renders package unusable
# dpkg-reconfigure lirc
Stopping lirc daemon: irexec lircmd lircd.
.udevdb or .udev presence implies active udev. Aborting MAKEDEV invocation.
##
## LIRC IS NOT C
>Quoting: m...@linux.it (Marco d'Itri)
>retitle 511054 inncheck suggests insecure permissions
>severity 511054 minor
>tag 511054 help
>thanks
>On Jan 07, The Eclectic One wrote:
>> The inn system doesn't even start after installation. There are plenty
Mmm.
Package: inn2
Version: 2.4.5-5
Severity: grave
Justification: renders package unusable
The inn system doesn't even start after installation. There are plenty
of files with the wrong ownership and permissions per inncheck (see
output below). Running "inncheck -f -perm | sh" fixes it and then
inn
Package: xserver-xorg
Version: 1:7.3+18
Severity: important
When logging off, the server crashes and a kdm restart is necessary to get
back the kdm screen. The options specific to the nvidia driver present
in the xorg.conf file used to work in Etch and Sarge. The nvidia driver
used is the nvidia
Quoting: Christian Perrier
>>>So, in short, in regular mode, it crashes (always at the same place)
>>>but in vga=771 mode, it doesn't, right?
>>Correct.
>And I assume that you get no crash as well if you're using the
>graphical installer.
I had not tried the graphical installer, figuring that
>Quoting: Christian Perrier
>>Quoting The Eclectic One (eclec...@sdf.lonestar.org):
>> First thought: race condition (the panic message contained a backtrace
>> of different threads), so then I tried multiple times with only one
>> change at at time: expert mode, regu
Quoting Christian Perrier
>> Ok, tried a few more times. I usually get the same kernel panic screen,
>Did you try in expert mode, ie choosing it from the "Advanced options"
>in the boot menu.
Yes, I tried expert as well as regular.
>In expert mode, when you reach the HW detection step, you'l
Quoting Christian Perrier
>OK. Are you in the position of testing with something else than a USB
>stick boot?
Actually, before I gave up on CDs (ruined 11 CD-Rs, probably marginal
media, drive or wodim problems) I had a CD made on a windows machine
of the lenny installer RC1. This is what I ju
>First of all, it would be nice if you could precise what exact version you
>tested.
I tried both the rc1 debian-testing-i386-netinst.iso and the daily
build as of a few days ago. Same result.
>The version we would like to see tested at this moment is:
>- RC1, which you can download from:
>hd
Package: debian-installer
Version: lenny installer
Severity: critical
Justification: breaks the whole system
-- System Information:
Debian Release: 4.0 <--- Not really. It's the lenny installer
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh lin
Package: wodim
Version: 9:1.1.9-1
Severity: grave
Justification: renders package unusable
The first error: "Cannot load media" happens when wodim is invoked as a
regular user that is a member of the cdrom group, so permissions should
not be a problem.
The second error: "Cannot init drive" happen
Package: linux-source-2.6.26
Version: 2.6.26-10
Severity: important
Hardware involved:
RealTek RTL8139D ethernet card (10/100Mb/s). Markings on the chip:
63122S1 L622E TAIWAN.
Linksys "8-port Workgroup hub"
Netgear "router/gateway RP-614"
Debugging info:
When installed, the RTL8139D card is re
Just compiled a new kernel 2.6.26 (from backports.org) and lshw now
seems to talk correctly to the scsi system and the panic doesn't
occur.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: linux-source-2.6.24
Version: 2.6.24-6~etchnhalf.6
Severity: critical
Justification: breaks the whole system
I've moved an Adaptec 1542CF with a SCSI chain of: scanner, tape drive and
CD writer into a P3. This hardware worked just fine in a pentium 133 years
ago under 2.4 kernels.
On th
Package: thinkpad-source
Version: 5.9-2
Severity: grave
Justification: renders package unusable
Tags: experimental
Trying the latest experimental kernel on sarge in an attemp to solve a usb
issue on a thinkpad 600E. The same problem occurs with thinkpad-source-5.8.4.
Looks like a macro expansion
Package: linux-source-2.6.15
Version: 2.6.15-2
Severity: normal
Tags: experimental
*** Please type your report below this line ***
Created a local binary kernel from the source on this sarge box.
Whereas the standard 2.6.8 kernel works fine, 2.6.15 doesn't
seem to respect that irq 10 is reserved
35 matches
Mail list logo
