Hello Witold,
On Wed, Jun 20, 2018 at 05:09:40AM +0200, Witold Baryluk wrote:
> Package: kicad-packages3d
> Severity: normal
>
>
> The following NEW packages will be installed:
> kicad-packages3d
> 0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
> Need to get 0 B/314 MB of
FWIW it's unlikely that I have time to work on this myself before
DebCamp *but* if they've not been solved by then, fixing these
regressions will be one of my top priorities at DebCamp (ideally with
someone else).
On Tue, Jun 19, 2018 at 07:30:48PM +0200, Andreas Metzler wrote:
> I looked at it and did not have any alternative bright ideas. There is
> just a single manual (non-shlibs) dependency involved and it is there
> for a good reason.
I tested changing the libevas1-engines-x Depends -> Recommends,
Package: reprotest
Version: 0.7.7
Followup-For: Bug #897442
I ran into this tonight and tracked it down to the timeouts hardcoded in
adt_testbed.py. A patch to allow overides from the environment is attached.
Ross
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT
Source: libvirt
Version: 4.3.0-1
Severity: wishlist
Hi Guido
There is a new upstream version 4.4.0 available for libvirt. Would it
be possible to update to it?
Regards,
Salvatore
Package: glances
Version: 2.11.1-4
Severity: normal
Dear glances mantainers,
Found that the systemd service for glances had wrong Documentation formating
plus a typo in the URL.
Cheers,
\d
--- orig2018-06-20 01:39:55.646179280 -0300
+++ diff2018-06-20 01:39:46.758160498 -0300
[Mathieu Malaterre]
> It would be nice to start integrating up to date patch from the famous
> issue #2469 in fop so that Debian user get the feeling that auto table
> layout is finally supported in fop:
>
> https://issues.apache.org/jira/browse/FOP-2469
I had a go at this, using the Debian fop
Source: tcptraceroute
Version: 1.5beta7+debian-4
Tags: patch
User: helm...@debian.org
Usertags: rebootstrap
tcptraceroute fails to cross build from source. The most glarring issue
is that it passes CC to ./configure rather than --host. That was a way
that worked with rather old ./configure
Em sex, 2018-06-08 às 23:19 +0200, Helmut Grohne escreveu:
> Source: ethstatus
> Version: 0.4.8
> Tags: patch
> User: helm...@debian.org
> Usertags: rebootstrap
>
> ethstatus fails to cross build from source, because the Makefile hard
> codes gcc. After making it substitutable, ethstatus cross
Package: kicad-packages3d
Severity: normal
The following NEW packages will be installed:
kicad-packages3d
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 0 B/314 MB of archives.
After this operation, 4635 MB of additional disk space will be used.
That is a lot. It
On Tue, Jun 19, 2018 at 10:14:38AM +0200, Paul Menzel wrote:
> Dear Josh, dear Tehnic, dear Mourad, dear Jacek,
> On 06/16/18 22:37, Josh Triplett wrote:
> > On Thu, Jun 14, 2018 at 11:59:20PM -0700, Josh Triplett wrote:
> >> On Thu, Jun 14, 2018 at 11:56:03PM -0700, Josh Triplett wrote:
> >>>
Package: rdfind
Version: 1.3.5-1
Severity: normal
rdfind bareally uses single core on my 8 core machine.
I do have some highly duplicate files or similar size, about 500GB is
size, with few million files. Using async io, or multiple threads to do
things like tree traversal, stat,
Package: mirrors
Severity: minor
User: mirr...@packages.debian.org
Usertags: mirror-list
Submission-Type: update
Site: mirrors.huaweicloud.com
Type: leaf
Archive-architecture: ALL amd64 arm64 armel armhf hurd-i386 i386 kfreebsd-amd64
kfreebsd-i386 mips mips64el mipsel powerpc ppc64el s390x
Package: mirrors
Severity: wishlist
User: mirr...@packages.debian.org
Usertags: mirror-submission
Submission-Type: new
Site: mirrors.huaweicloud.com
Type: leaf
Archive-architecture: ALL amd64 arm64 armel armhf hurd-i386 i386 kfreebsd-amd64
kfreebsd-i386 mips mips64el mipsel powerpc ppc64el s390x
Package: mirrors
Severity: wishlist
User: mirr...@packages.debian.org
Usertags: mirror-submission
Submission-Type: new
Site: mirrors.huaweicloud.com
Type: leaf
Archive-architecture: ALL amd64 arm64 armel armhf hurd-i386 i386 kfreebsd-amd64
kfreebsd-i386 mips mips64el mipsel powerpc ppc64el s390x
On Mon, 2018-06-18 at 20:22 +0900, Hideki Yamane wrote:
> I've run it and got failure as below (my question is can we run
> nested chroot without failure?)
If I parse that correctly you as asking is it possible to possible to
do a debootstrap inside of a chroot. The answer is yes of course, but
Package: keepassxc
Version: 2.3.1+dfsg.1-1
Hello,
Please consider uploading a backport for this package.
I was able to successfully create such a backport without any
modifications, as the build requirements seem to be satisfied using
stretch and stretch-backports sources.
Thank you for
On Wed, Jun 13, 2018 at 6:26 AM, Alexis Murzeau wrote:
> I am looking for a sponsor for my package "streamlink" for a new
> upstream version 0.13.0.
Uploaded.
I noticed the tests print a bunch of deprecation warnings, please talk
to upstream about that if you didn't already.
--
bye,
pabs
severity 851679 wishlist
tags 851679 + upstream
clone 901897 -1
retitle -1 dgit fails autopkgtest: true/false are no valid
working-tree-encodings
reassign -1 dgit 5.0
retitle 901897 git needs Breaks against dgit versions without
working-tree-encoding support
block 901897 by -1
quit
Hi Ian,
Ian
(ditto)
On Wed, May 30, 2018 at 11:18:11AM -0500, Benjamin Kaduk wrote:
> (resetting autoremoval timer)
>
> On Fri, May 11, 2018 at 12:44:01PM -0500, Benjamin Kaduk wrote:
> > ping?
> >
> > I cannot reproduce locally either on bare metal or in schroot.
> >
> > -Ben
> >
> > On Fri, May 04,
On Wed, Jun 13, 2018 at 03:49:13PM -0700, Elliott Mitchell wrote:
> While an interesting historic relic, is it worth keeping #601006 around
> to point out how attitudes have changed?
I guess I should register for the record that my attitude has not
changed.
On 20/06/18 00:52, peter green wrote:
Debdiff attatched, no intent to NMU.
Sorry hit send too early, here is the debdiff.
diff -Nru zeroc-ice-3.7.1/debian/changelog zeroc-ice-3.7.1/debian/changelog
--- zeroc-ice-3.7.1/debian/changelog2018-06-06 21:28:50.0 +
+++
package: zeroc-ice
severity: important
version: 3.7.0-4
zeroc-ice started failing to build in raspbian with version 3.7.0-4.
dh_install: Cannot find (any matches for) "usr/lib/*/*.so" (tried in .,
debian/tmp)
dh_install: libzeroc-ice-dev missing files: usr/lib/*/*.so
dh_install: Cannot find
*
> ITK-SNAP: Segmentation fault
> BACKTRACE:
> /usr/lib/snap-3.6.0/ITK-
> SNAP(_Z24SegmentationFaultHandleri+0x144)[0xc5627d14]
> /lib/x86_64-linux-gnu/libc.so.6(+0x34f00)[0x7f02a322ff00]
>
Hi,
On Sun, Jun 17, 2018 at 12:39 PM Niels Thykier wrote:
> On Wed, 16 May 2018 09:50:28 -0400 Felipe Sateler
> wrote:
> > [...]
> >
> >
> >> Can you handle the update-rc.d side or should I file a bug against
> >> init-system-helpers?
> >>
> >
> > I'd like opinions from the rest of pkg-systemd
Hi Scott,
I think you closed this one by mistake. vala-terminal has not been
removed from unstable as far as I can see.
P.S.: Thanks for taking care of my other RM requests!
-- Sebastian
On Tue, Jun 19, 2018 at 04:03:13AM +, Debian Bug Tracking System wrote:
> This is an automatic
Package: git
Version: 1:2.18.0~rc2-1
Severity: serious
Justification: breaks dgit test suite, breaks existing attempts not to corrupt
data
Firstly, apologies for filing this bug as RC. I wanted to prevent the
new git migrating. It breaks the dgit autopkgtest. For reasons I
don't understand,
OK I had to post it via
debconf-disc...@lists.debconf.org not
debconf-disc...@lists.debian.org in order to create
https://lists.debian.org/debconf-discuss/2018/06/msg00023.html
What a mess.
Package: wnpp
Owner: Robert James Clay
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org, debian-p...@lists.debian.org
* Package name: libmodule-build-pluggable-ppport-perl
Version : 0.04
Upstream Author : Tokuhiro Matsuno Etokuhirom AAJKLFJEF@ GMAIL COME
* URL
Package: lists.debian.org
On https://lists.debian.org/msgid-search/WHATEVER
Are you sure such gmane links still work?
MAILING LISTS
About Debian
Getting Debian
Support
Developers' Corner
mailing lists / message-id search
Sorry, no match found for message-id
It may take a few minutes
> A patch is available at the upstream bug tracker at [1], it might be
> worth applying to the package.
>
> [1]: https://github.com/arut/nginx-dav-ext-module/pull/17
The patch has been sitting there for quite a while (3 years), and there
was no upstream response; is that the right place to
Package: dict-gcide
Version: 0.48.4
Severity: minor
In the definition of "spiritualism":
3. A belief that departed spirits hold intercourse with
mortals by means of physical phenomena, as by rappng, or
^^
should be "rapping"?
On Tue, 19 Jun 2018 14:25:07 +0100 Brian Potkin wrote:
[...]
> A temporary workaround is to run:
>
> cupsctl Browsing=No
>
> to restore the CUPS default setting.
>
> How do you go on with that, Francesco?
I can try, but I already have:
$ grep Browsing /etc/cups/cupsd.conf
Source: pycollada
Severity: wishlist
Dear maintainer, there's a newer version of pycollada available: v0.6
from November 2017.
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (900, 'unstable'), (800, 'experimental'), (500, 'unstable-debug')
Architecture:
Package: src:fortunes-debian-hints
Version: 2.01.1
Severity: serious
Dear maintainer:
Since a few days, this package fails to build from source:
Discard hints-ja (1 of 44 strings; only 2.27% translated; need 80%).
Discard hints-pt (1 of 44 strings; only 2.27% translated; need 80%).
Discard
On Tue, 19 Jun 2018 at 23:52:45 +0200, Guilhem Moulin wrote:
> Sorry, I meant between your backup initrd.img (presumably also compiled
> with MODULES=dep) and the new, broken one.
Alternatively, if you don't have this initrd around anymore, are you able
to boot if you add the ‘xts’ module to the
Package: ftp.debian.org
Severity: normal
The upstream stopped the project and removed repository years ago.
This "HWP" document backend is still in premature state of a
text-extractor so I don't think it worth to package.
And now there are the proprietary HWP viewer for Linux from Hancom
which
On Tue, 19 Jun 2018 at 23:00:29 +0200, Adrien CLERC wrote:
> Le 19/06/2018 à 22:40, Guilhem Moulin a écrit :
>> Could you run the following on both the broken and backup initrd and
>> send the diff?
>>
>> lsinitramfs /path/to/initrd.img | grep ^lib/modules/ | sort
>
> See
On 06/19/2018 05:08 PM, Jeremy Bicha wrote:
> The xterm dependency is only used for the build tests and it's marked
> correctly for that.
So the test suite does not work on servers without a gui? And why
doesn't it seem to run the test suite or fail without xterm?
Package: xserver-xorg-core
Version: 2:1.20.0-2
Followup-For: Bug #901497
I have likely the same bug I just filed against firefox here:
https://bugzilla.mozilla.org/show_bug.cgi?id=1468930
Mozillans pointed me to these bugs filed in arch and redhat
Le 19/06/2018 à 23:06, Guilhem Moulin a écrit :
> Just noticed what looks like a regression, I wonder if that's the same
> problem. Does your system have AES-NI or similar, or are you using the
> generic modules? What's the output of
>
> grep -A2 '^name *: *xts(aes)' /proc/crypto
>
# grep
Le 19/06/2018 à 22:40, Guilhem Moulin a écrit :
> Could you run the following on both the broken and backup initrd and
> send the diff?
>
> lsinitramfs /path/to/initrd.img | grep ^lib/modules/ | sort
See initramfs_dep_vs_most.diff.gz. The dep output is not working, and
the most output is
On Tue, Jun 19, 2018 at 4:20 PM, Phillip Susi wrote:
> I noticed while trying to build glib that it claims to build-depend on
> xterm, which is insane; no package should require xterm to build. I
> forced it to build anyway without xterm installed, and it built fine, so
> this dependency should
On Tue, 19 Jun 2018 at 22:40:23 +0200, Guilhem Moulin wrote:
> FWIW 2.0.3-2 was tested with MODULES=dep, too. I wonder how your system
> differs from our test environments.
Just noticed what looks like a regression, I wonder if that's the same
problem. Does your system have AES-NI or similar,
On Tue, 2018-06-19 at 16:20 -0400, Phillip Susi wrote:
> Package: glib2.0
> Version: 2.56.1-2
>
> I noticed while trying to build glib that it claims to build-depend
> on
> xterm, which is insane; no package should require xterm to build. I
> forced it to build anyway without xterm installed,
Package: summit.debconf.org
Severity: wishlist
Some attendees (for example, GSoC/Outreachy interns) don't always have
credit cards or don't have a credit limit high enough to purchase a flight.
On the page asking for the amount required, it would be useful to add an
extra menu with a couple of
On Tue, 19 Jun 2018 at 21:39:06 +0200, Adrien CLERC wrote:
> Fortunately, the previous one has still a valid initramfs, so I can boot
> my system (many thanks for that backup system).
> […]
> Check that kernel supports aes-xts-plain64 cipher (check syslog for
> more info).
Could you run the
Hi,
On Mon, Jun 18, 2018 at 10:48:58PM +0300, Guy Inbar wrote:
> Package: libxml2
>
> Vulnerability class: Null deref, Denial of Service.
>
> Description:
> There are two bugs in the xpath implementation in libxml2 in the file:
> https://github.com/GNOME/libxml2/blob/master/xpath.c
>
>
Package: summit.debconf.org
Severity: wishlist
During the registration process, ask the user if they require a visa
Offer a link (customizable for each year/event) to the official site for
checking visa requirements.
If they select the option "visa required", ask for any details required
by the
Package: summit.debconf.org
If a user is not logged in and they click the link at the bottom of the
bursary status email, e.g.
https://debconf18.debconf.org/users/some_user
the "Page not found" error appears with the text "The page you requested
cannot be found"
In this case it should
Package: libparams-validate-perl
Version: 1.13-1+b1
Severity: important
Disclaimer: I'm aware this is a few days too late for regular jessie
updates, including the upcoming ultimate point release. But I consider
the issue serious enough to give it some publicity. About possible
resolutions, see
Hi Josue,
Le 19/06/2018 à 21:19, Josue Ortega a écrit :
> After upgrade to version 3.5.3 for some reason I was getting the following
> error
> running `mvn clean package -U` :
> --
> Exception in thread "main" java.lang.NoSuchMethodError:
>
Package: glib2.0
Version: 2.56.1-2
I noticed while trying to build glib that it claims to build-depend on
xterm, which is insane; no package should require xterm to build. I
forced it to build anyway without xterm installed, and it built fine, so
this dependency should be removed.
Package: liquidsoap
Version: 1.1.1-7.2
Severity: important
Dear Maintainer,
# /etc/init.d/liquidsoap start
Starting liquidsoap channels: bad2.liq Illegal instruction
OK
-- System Information:
Debian Release: 9.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500,
Hi
Sorry for long delay. Thank you for the patch. A patched package will be
uploaded shortly.
// Ola
On 23 May 2018 at 20:06, Sebastian Klamar <
bug.cron-...@sebastian.klamar.name> wrote:
> Package: cron-apt
> Version: 0.10.0
> Severity: minor
>
> Dear Ola,
>
> /usr/share/cron-apt/functions
Guillem Jover:
> [..]
>
> We discussed this briefly yesterday on IRC before Ximin filed the
> report. I don't see much difference with what was mentioned and I'll
> repeat what David Kalnischkies and me proposed on the spot, as a
> potentiall working solution.
>
To be fair, neither of you were
Am Tue, Jun 19, 2018 at 08:11:03PM +0200 schrieb Sven Joachim:
> Am 19.06.2018 um 11:07 schrieb w...@chaos.in-kiel.de:
>
> > I regularly connect (via mosh) to remote machine from my desktop and
> > reattach to a "screen" there. For some time now, screen on the remote
> > machine reports
> >
> >
On Fri, May 25, 2018 at 05:06:21PM +0300, Niko Tyni wrote:
> Control: severity -1 serious
>
> On Fri, May 25, 2018 at 11:05:58AM +0200, intrig...@debian.org wrote:
> > Package: libgnupg-interface-perl
> > Version: 0.52-9
> > Severity: important
> > X-Debbugs-Cc: d...@debian.org
>
> > ci.d.n
Package: yagf
Version: 0.9.3.2-1+b1
Severity: important
Dear Maintainer,
Started yagf (with tesseract set as OCR)--after unchecking `Crop' in
`Image Processing' as recommended in bug report #746380--, opened
self-scanned (xsane) png file, ->Settings->OCR and Languages, selected
`Hungarian' (no
Package: xwayland
Version: 2:1.20.0-2
Severity: normal
Tags: patch
Dear Maintainer,
while trying to watch the German TV show "Die Sendung mit der Maus" from
https://www.wdrmaus.de/aktuelle-sendung/, my Gnome desktop freezes. I can
SSH into the machine and see that Xwayland eats 100% CPU. The
Package: cryptsetup-initramfs
Version: 2:2.0.3-2
Severity: critical
--- Please enter the report below this line. ---
Hi,
I have a full disk-encryption set up with LUKS.
After upgrading from 2.0.3-1 to 2.0.3-2 my last (and current) kernel is
unbootable.
Fortunately, the previous one has still a
On Sun, 2018-06-17 at 15:17 -0400, Sandro Tosi wrote:
> Hello Adam,
>
> On Mon, Jun 19, 2017 at 12:48 PM Adam Borowski wrote:
> >
> > Package: reportbug
> > Version: 7.1.7
> > Severity: wishlist
> >
> > Hi!
> > The "System Information" part of reportbug's output doesn't currently
> > mention
Hi James,
> Thanks! Hopefully kitty will be through binary-NEW by the time this is
> released. :-)
Hint taken.. I have processed src:kitty in NEW (alas with a REJECT).
Regards,
--
,''`.
: :' : Chris Lamb
`. `'` la...@debian.org / chris-lamb.co.uk
`-
Package: wnpp
Owner: Robert James Clay
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org, debian-p...@lists.debian.org
* Package name: libmodule-build-pluggable-perl
Version : 0.10
Upstream Author : Tokuhiro Matsuno
* URL :
Package: maven
Version: 3.5.3-1
Severity: important
Dear Maintainer,
After upgrade to version 3.5.3 for some reason I was getting the following
error
running `mvn clean package -U` :
--
Exception in thread "main" java.lang.NoSuchMethodError:
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: transition
Dear Release Team,
I would hereby like to request a transition slot for libantlr3c.
The current version of libantlr3c in experimental, 3.4+dfsg-1,
includes a patch for the RC bug
Package: wnpp
Severity: normal
I intend to orphan the wvdial package. The package has been removed from
testing because wvstreams is RC-buggy due to the its dependency on
libssl1.0.2. The whole story is in #901361 [0].
The persons that intends to adopt wvdial should also look after
wvstreams.
Package: glances
Version: 2.11.1-4
Severity: serious
Upgrading glances from 2.11.1-3 to 2.11.1-4 fails for me as follows:
Setting up glances (2.11.1-4) ...
Installing new version of config file /etc/init.d/glances ...
[warn] Stopping Glances server: glances [] PID file not found ...
Package: src:cnvkit
Version: 0.9.3-1
Severity: serious
Dear maintainer:
This package fails to build from source:
Traceback (most recent call last):
File "../cnvkit.py", line 4, in
from future import standard_library
ModuleNotFoundError: No module named 'future'
See:
I've had the same error happen ("generic_make_request: Trying to write
to read-only block-device "...) when running os-prober through grub on
my basically "wheezy" system. I removed os-prober, to stop having to do
a 12 hour resync of the raid5 array every time I updated the kernel.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Tue, 2018-06-19 at 16:26 +0200, Pascal Dormeau wrote:
> Not sure it helps, but I observe the same here (xfwm4 with compositing +
> mesa 18.1.1-1 fail, and a white screen is displayed) but only with
> xfwm4 in experimental (4.13.0-1).
> Unstable
Am 19.06.2018 um 11:07 schrieb w...@chaos.in-kiel.de:
> I regularly connect (via mosh) to remote machine from my desktop and
> reattach to a "screen" there. For some time now, screen on the remote
> machine reports
>
> Cannot find terminfo entry for 'xterm-256color'.
>
> and quits.
>
> After some
Package: universal-ctags
Version: 0+git20180225-1
Severity: normal
After installing the universal-ctags package, no man pages are installed
for the program. The command "man ctags" results in the message "No manual
entry for
ctags". Reading https://github.com/universal-ctags/ctags/issues/1249,
Package: chromium
Version: 66.0.3359.117-1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Noticed two extensions when installing program
* What exactly did you do (or not do) that was
Package: openmpi-bin
Version: 3.1.0-7
User: helm...@debian.org
Usertags: rebootstrap
Control: affects -1 + src:valgrind
Cross building valgrind presently fails. It detects mpi as absent and
fails the build missing files for libmpiwrap. valgrind's configure.ac
tries to link a minimal program and
Package: libemail-address-perl
Version: 1.909-1
Perl module Email::Address, also in the last version 1.909 is vulnerable
to Algorithm Complexity problem and can cause Denial of Service when
attacker prepares specially crafted input. Root of this problem is that
parsing of email addresses in
Quoting Ian Jackson (2018-06-19 18:36:40)
> Jonas Smedegaard writes ("Re: Bug#901303: git-buildpackage: gbp import-orig
> --uscan skips unrelated files importing repacked tarball"):
>> Quoting Ian Jackson (2018-06-19 16:41:31)
>>> What does uscan use to do the repacking ? I doubt the bug can be
On 2018-06-16 Ross Vandegrift wrote:
> On Fri, Jun 15, 2018 at 09:18:59PM +0200, Bill Allombert wrote:
> > There is a circular dependency between libecore-input1, libecore-x1,
> > libevas1 and libevas1-engines-x:
> Dang, thanks for the heads up Bill.
> Andreas - the change I proposed for the
Any news after half a year?
Why it's marked "fixed-upstream"?
Jonas Smedegaard writes ("Re: Bug#901303: git-buildpackage: gbp import-orig
--uscan skips unrelated files importing repacked tarball"):
> Quoting Ian Jackson (2018-06-19 16:41:31)
> > What does uscan use to do the repacking ? I doubt the bug can be in
> > gbp.
>
> "gbp import-orig --uscan" ->
Package: ntpsec
Version: 1.1.0+dfsg1-1
Followup-For: Bug #901439
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
As suggested,
To further summarize ongoing conversations:
It appears that there many be another alternative, midway between the
two extremes of stabilization on one hand and keeping this bug report
open on the other. The idea is to ship WireGuard in stable-backports
and in unstable, but not let this migrate to
I was reviewing bugs for xpra, and came across this one:
> While it is common to redirect stdout (and/or) stderr to /dev/null,
> the better approach is to close that file descriptor prior to call
> xpra (for example xpra info where only the return value is of
> interest).
>
> But xpra fail in
Package: xpra
Version: 0.17.6+dfsg-1
I ran
TERM=xterm-mono xpra --daemon=no start :89
and the output came with the error message in dark red on black
(in my can-do-colour xterm).
I have a colour vision anomaly which makes dark red on black much
harder to read than for most people.
There
Quoting Ian Jackson (2018-06-19 16:41:31)
> Jonas Smedegaard writes ("Re: Bug#901303: git-buildpackage: gbp import-orig
> --uscan skips unrelated files importing repacked tarball"):
> > Quoting Ian Jackson (2018-06-19 12:29:06)
> > > For now I have refrained from merging this bug with #831870 but
Package: wnpp
Severity: wishlist
Owner: Dylan Aïssi
Package name: photoflare
URL: http://photoflare.io/
License: GPL-3+
Description: Simple but powerful Cross Platform Image Editor
This is an effort to bring quick, simple but powerful image editing to the
masses. PhotoFlare is inspired by the
Package: gnome-documents
Version: 3.28.0-1
Severity: normal
This is what I see in the journal:
un 19 17:04:16 tommy gnome-documents[2819]: Failed to load shared library
'libgdprivate-1.0.so' referenced by the typelib: libgdprivate-1.0.so: Kann die
Shared-Object-Datei nicht öffnen: Datei oder
Thank you for your help, this non-sense was driving me crazy!
Unfortunately, this server is nothing special. It's an OVH VPS, with its
default Debian install. Network is configured with OVH's DHCP. No proxy,
but that does not mean OVH isn't mangling somewhere in the middle.
I'll reach OVH's
Package: lists.debian.org
X=debbugs-cc: ajq...@debian.org
[Andrew, you will just have to post this yourself.
I can't. I already added trips J and K to
https://wiki.debconf.org/wiki/DebConf18/DayTrip ]
Here is the message I sent.
From: 積丹尼 Dan Jacobson
To: debconf-disc...@lists.debian.org
Package: wnpp
Severity: wishlist
Owner: umar haruna abdullahi
* Package name: tvb-framework
Version : 1.5.6
Upstream Author : TVB Team
* URL : http://www.thevirtualbrain.org/
* License : GPL V3
Programming Lang: Python
Description : The complete
control: severity -1 wishlist
On Tue, Jun 19, 2018 at 05:26:26PM +0530, Avinash Sonawane wrote:
> Package: claws-mail-spamassassin
> Version: 3.14.1-3+b1
> Severity: normal
>
> Dear Maintainer,
>
> I'm using Claws-mail 3.14.1 with Spamassassin plugin.
>
> Whenever I mark a message as 'Ham'
Package: gnome
Version: 1:3.22+9
Severity: important
--- Please enter the report below this line. ---
Entering gnome shell in wayland session and opening a Firefox.
When opening some pages, like
On Mon, Jun 18, 2018 at 08:45 François Gannaz
wrote:
> Certificate did not match expected hostname: acme-v01.api.letsencrypt.org
> .
Hello François,
This seems like there is a proxy between you and the open internet that is
attempting to (badly) man-in-the-middle your connection. I double
Package: wnpp
Severity: wishlist
Owner: umar haruna abdullahi
* Package name: tvb-library
Version : 1.5.6
Upstream Author : TVB Team
* URL : http://www.thevirtualbrain.org/
* License : GPL V3
Programming Lang: Python
Description : "TVB Scientific
On 06/19/2018 06:09 AM, Arthur Marsh wrote:
> there were no symlinks in /etc/*d pointing to /etc/init.d/ntp
Does running "dpkg-reconfigure ntpsec" fix that?
If not, what do these output:
ls -l /etc/init.d/ntp
update-rc.d ntp defaults
--
Richard
(Replying to the bits relevant for #901804)
Paul Gevers writes ("Re: DEP-8 pseudo-restriction
"hint-dpkg-testsuite-triggers""):
> And this wouldn't be enough either, at least not to distinguish between
> SKIP due to regression or SKIP due to infra change.
I think that the test author who
Package: lists.debian.org
$ w3m -dump lists.debian.org
w3m: Can't load lists.debian.org.
$ w3m -dump https://lists.debian.org
Hangs.
Hello,
With the bpo version accepted into stretch-backports, I'm closing this bug.
>
Nice
> Samuel, if you have time, please help sponsor future backport uploads of
> papirus-icon-theme into stretch-backports. I have offered you with access
> to
> Salsa pkg-deepin-team/papirus-icon-theme
Jonas Smedegaard writes ("Re: Bug#901303: git-buildpackage: gbp import-orig
--uscan skips unrelated files importing repacked tarball"):
> Quoting Ian Jackson (2018-06-19 12:29:06)
> > For now I have refrained from merging this bug with #831870 but maybe
> > the gbp maintainers would like to do
On Mon, 7 Nov 2016 17:43:42 +0100 Andreas Tille wrote:
> Before I continue my naive attempt to package babel-polyfill: Does it
> really need three additional packages?
babel and core-js are packaged now. But gitlab now uses the node
versions of babel directly via ruby-webpack-rails. I'm going to
1 - 100 of 187 matches
Mail list logo
