Hi there!
I have an exim mail server, and I have a perl script, that removes the letter body,
and keeps
only the sender, and the subject from the mail.
This way we can send a short mail to an another mailbox with the headers, and from
there will be
sent an SMS to the mobile phone.
I put the
Hi there!
I have found a very strange error. I have a linux box (kernel 2.4.18) to route
three nets.
It connects 3 networks via ethernet interfaces.
Network A (INTERNET)
|
Net B(single LAN) -Router-Net C (Huge routed WAN)
The router has NO DENY P
Hi there!
I have found a very strange error. I have a linux box (kernel 2.4.18) to route three
nets.
It connects 3 networks via ethernet interfaces.
Network A (INTERNET)
|
Net B(single LAN) -Router-Net C (Huge routed WAN)
The router has NO DENY P
Check your active network components. The network card, and the switck may
speak the speed auto
negotiation with dialect. Therefore they can always negotiate, and there will
no valuable traffic.
If it is, set the link speed manually.
R.
Check your active network components. The network card, and the switck may speak the
speed auto
negotiation with dialect. Therefore they can always negotiate, and there will no
valuable traffic.
If it is, set the link speed manually.
R.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
Use this:
apt-get install exim4 (4.20.3)
deb http://www.logic.univie.ac.at/~ametzler/debian/exim4manpages/ woody/
deb http://www.logic.univie.ac.at/~ametzler/debian/gnutls/ woody/
R.
Idézve: Dátum: 2003/8/7 11:42:50. Feladó: "Craig" <[EMAIL PROTECTED]>.
>Hi Guys
>
>I need to compile exim 4.20 on
My problem is below:
I have a service application, which is unable to run as daemon.
If I run the application from the rc.d scripts the system hangs up because the
process does not exit.
If I put an "&" mark to the end of the line evereyting is the same.
The service application hangs the system
My opinion: If you want to use reliable ipsec The only choice is FreeSwan/IPSec.
We could solve any problems with it (not so easy but works).
R.
Idézve: Dátum: 2003/3/19 11:51:36. Feladó: Samuele <[EMAIL PROTECTED]>.
> Hi there.
>I have to set up a VPN service on some Debian (woody) servers
There is a solution for your problem,
1.
Forget ifconfig, and route
2.
Get knowlege about ip and tc (iproute package)
3.
Compile QoS into kernel.
4. Check Linux-advanced iprouting-howto
http://www.linuxdocs.org/HOWTOs/Adv-Routing-HOWTO.html
My project is also like this but I not finished yet.
My opinion: If you want to use reliable ipsec The only choice is FreeSwan/IPSec.
We could solve any problems with it (not so easy but works).
R.
Idézve: Dátum: 2003/3/19 11:51:36. Feladó: Samuele <[EMAIL PROTECTED]>.
> Hi there.
>I have to set up a VPN service on some Debian (woody) servers
There is a solution for your problem,
1.
Forget ifconfig, and route
2.
Get knowlege about ip and tc (iproute package)
3.
Compile QoS into kernel.
4. Check Linux-advanced iprouting-howto
http://www.linuxdocs.org/HOWTOs/Adv-Routing-HOWTO.html
My project is also like this but I not finished yet.
Use the "forward first " statement
Bind will ask the nearest name-servers ( in the "forwarders" statement) to resolve the
names.
The ISP-s name server may have more resolved requests than your.
If the forwarder hasn't the address your server will resolve it.
It works well by us for years.
R.
Help Me please!
I have upgraded my potato distributed squid to woody. (2.2.Stable5 to
2.4.stable6)
I had a working configuration, with two running squid.
First was the proxy only, and the second was the accelerator only copy.
As I have upgraded to woody the accelerator makes strange errors.
The
13 matches
Mail list logo